Dodge 2500 - Manual

CODE *A6 14 SEATING SEATS, VINYL – BLACK Black vinyl Details and Technology The seats are upholstered in three-ply, Black, tricot vinyl. The base material consists of two layers of polyester and one layer of cotton. The grained surface has a soft PVC coating to repel moisture. The shape and stitchin...

CODE 3B5 19 SHOCK ABSORBERS, HIGHER CAPACITY CHASSIS Higher capacity shock absorbers Details and Technology The two rear shock absorbers provide firmer damping than the standard shock absorbers. They also have more heat-resistant seals, for a longer service life. Benefits and Arguments • Longer serv...

Picture shows pre-production model. Picture shows pre-production model. CODE 3EN 20 ELEC TRICAL ELECTRICAL TERMINAL STRIP Terminal strip with electrical connections on driver’s seat base Details and Technology The terminal strip is mounted on the inner side of the driver’s seat base.It comprises thr...

Picture shows pre-production model. CODE 3JV 21 HEATER BOOSTER HEATING /COOLING Heater booster Details and Technology 5-kW heater booster can be switched on whenever the engine is running. The on/off switch is situated to the right of the light switch. When the heater booster is switched on, a red i...

22 INTERIOR Picture shows pre-production model. CODE 42A WOODEN FLOOR Wood floor Details and Technology The passenger compartment/load compartment has an 5/16-inch thick plywood floor with textured surface. Benefits and Arguments • Easier loading and unloading and easier cleaning of the load compart...

Picture shows pre-production model. Picture shows pre-production model. CODE AMV 24 SAFET Y BACKUP CAMERA GROUP * Details and Technology Backup camera group consists of rear backup camera, wiring and I/P-mounted monitor. Benefits and Arguments • Improves rearward visibility • Greater safety when rev...

CODE BAD 25 ALTERNATOR, 180-AMP ELEC TRICAL 12-volt/180-amp alternator Details and Technology The standard alternator is a high capacity 12-volt/180-amp alternator. Benefits and Arguments • Improved battery charging in short distance operation • Enhanced electrical system performance The higher capa...

CODE BAJ 26 ELEC TRICAL ALTERNATOR, 220-AMP 12-volt/220-amp alternator Details and Technology The standard alternator is replaced by a higher capacity 12-volt/220-amp alternator. Benefits and Arguments • Improved battery charging in short distance operation • Enhanced electrical system performance T...

Picture shows pre-production model. CODE BC1 27 BATTERY, 100-AH (HIGH CAPACITY) ELEC TRICAL Auxiliary battery (higher capacity) Details and Technology In addition to the standard battery, a 12-volt/100-AH auxiliary battery with long cycle life is mounted in the engine compartment. The supply voltage...

CODE BCY 28 ELEC TRICAL BATTERY, AGM – 95-AH AGM battery 12-volt/95-AH Details and Technology A more powerful 12-volt/95-AH AGM battery is fitted instead of the standard 12-volt/100-AH battery. The AGM battery is provided with absorbing glass fleece which contains and ligates the acid. Therefore, in...

CODE BDC 29 BATTERY, 100-AH ELEC TRICAL 12-volt/100-AH battery Details and Technology Benefits and Arguments • Electrical system designed for demanding requirements • Reliable starting in winter This high capacity battery is designed for heavy-duty requirements, e.g., for frequent starting in short ...

CODE BNB 30 SAFET Y ADAPTIVE ESP™ (ELECTRONIC STABILITY PROGRAM) Adaptive ESP™ (Electronic Stability Program)* Details and Technology The Adaptive ESP (Electronic Stability Program)* is comprised of the following functions: EBD (electronic brake force distribution) – This system helps to prevent the...

CODE CD1 33 CUP HOLDERS, REAR SEATING Cup holders in passenger compartment Details and Technology Unit slides out to the front below the seat cushion to allow cups or other drinking containers to be put down at shin level between the seats (twin-seater bench: two cups) or between the outer seats and...

CODE CD2 34 SEATING FRONT PASSENGER SEAT BASE DELETION Deletion offront passenger’s seat base Details and Technology The vehicle is supplied without a front passenger’s seat base. Benefits and Arguments • Provides unimpeded access from the front passenger door to the load compartment For special-pur...

CODE CDD 36 SEATING COMFORT DRIVER’S SEAT Comfort driver’s seat Details and Technology Comfort driver’s seat with fore/aft adjustment (259 millimetres [10.2 inches]), 45° backrest adjustment, height adjustment (approximately 58 millimetres [2.3 inches]), cushion angle adjustment (+/– 2.5°) and a man...

Picture shows pre-production model. CODE CDQ 38 SEATING COMFORT HEADREST, FRONT PASSENGER Comfort front passenger’shead restraint Details and Technology The front passenger’s seat is equipped with a height- and tilt-adjustable, padded head restraint. Benefits and Arguments • Greater comfort • Enhanc...

Picture shows pre-production model. Picture shows pre-production model. CODE CDY 41 SEATING COMFORT FRONT PASSENGER SEAT Comfort front passenger seat Details and Technology Comfort front passenger’s seat with fore/aft adjustment (259 millimetres [10.2 inches]), 45° backrest adjustment, height adjust...

Picture shows pre-production model. CODE CFB 43 SEATING BENCH SEAT, THREE PASSENGER FIRST ROW Three-seater bench in passenger/cargo compartment,first row Details and Technology Three-seater bench in passenger compartment, first row, on left hand side (looking in the direction of travel) . All three ...

CODE CFY 45 SEATING BENCH SEAT, TWO PASSENGER SECOND ROW Two-seater bench in passenger compartment, second row Details and Technology Two-seater bench in passenger compartment, second row, on left hand side (looking in the direction of travel) . Both seats are fitted with three-point, inertia-reel s...

CODE CGU 47 SAFET Y CHILD SEAT ANCHORING ISOFIX child seat anchoring system Details and Technology The two-seater bench is fitted with two ISOFIX bars and one top tether. The narrow three-seater bench is fitted with four ISOFIX bars and three top tethers. The special aftermarket child seat snaps int...

CODE CJ4 49 SAFET Y AIR BAGS, FRONT SIDE-CURTAIN Side-curtain air bags* for driver and front passenger Details and Technology The side-curtain bags,* fitted in the roof trim over the driver and front passenger doors, deploy in an accident with severe lateral acceleration/deceleration (e.g., a side i...

CODE CK7 51 INTERIOR STORAGE SLOT Slot at front under roof liner Details and Technology Slot is fitted centrally under the roof liner. Benefits and Arguments The slot can be used for installing equipment (e.g., toll equipment or garage door transmitter) .

CODE CK Z 53 INTERIOR FLOOR MAT(S), REAR Floor mat(s) in passenger compartment Details and Technology A rubber mat is loose-laid on the wood floor. The black rubber mat (or mats, depending on wheelbase) covers the entire passenger compartment/load compartment, including the wheel arches. Benefits an...

CODE CS1 60 GRAB HANDLE, B-PILLAR DOORS Entrance grab handle for load compartment sliding door on B-pillar Details and Technology Installation of a vertical grab handle on the vehicle’s B-pillar. Benefits and Arguments • Makes it easy to enter the passenger compartment Makes getting onboard easier f...

CODE CSJ 61 SEATING TWO-WAY HEADREST, REAR SEATS Two-way head restraints for passenger compartment seats Details and Technology The passenger compartment seats are equipped with a height-adjustable head restraint. Benefits and Arguments • Greater comfort Height adjustment facility provides individua...

CODE CSQ 63 DOORS GRAB HANDLE, RIGHT REAR Entrance grab handle on corner pillar, rear right Details and Technology A vertical grab handle is fitted on the rear right hand corner pillar. Benefits and Arguments • Easy entry to load compartment/passenger compartment Picture shows pre-production model.

CODE CSZ 65 DOORS GRAB HANDLE, LEFT REAR Entrance grab handle on corner pillar, rear left Details and Technology A vertical grab handle is fitted on the rear left hand corner pillar. Benefits and Arguments • Easy entry to load compartment/passenger compartment Picture shows pre-production model.

CODE CTF 68 GRAB HANDLE, B-PILLAR w/PARTITION DOORS Entrance grab handle for load compartment sliding door on bulkhead Details and Technology Installation of a vertical grab handle on the vehicle’s bulkhead. Benefits and Arguments • Makes it easy to enter the load compartment Remarks Grab handle (CT...

CODE CTJ 69 SEATING SWIVELLING FRONT PASSENGER SEAT BASE Swivelling front passenger seat base Details and Technology A swivelling element is fitted to the front passenger’s seat base. Benefits and Arguments • Allows a special front passenger seat to be fitted • Allows the front passenger’s seat to b...

Picture shows pre-production model. CODE CUA 70 SEATING ARMREST, DRIVER’S SEAT Armrest for driver’s seat Details and Technology A tilt-adjustable armrest is fitted to the inboard side of the driver’s backrest. Benefits and Arguments • More relaxed driving, particularly on long journeys Allows the ar...

CODE CV4 72 INTERIOR FRONT ASHTRAY W/CIGAR LIGHTER Front ashtray with cigar lighter Details and Technology An ashtray and cigar lighter (180 watts maximum) are fitted in the storage compartment at the front of the centre console. Power can be drawn only when the key is in position one or two. The so...

Picture shows pre-production model. Picture shows pre-production model. CODE CW1 74 PARTITION/ WALLS LASHING RAILS, FLOOR Rear load-securing system Details and Technology Two lashing rails, fitted flush with the wood floor, are bolted to the substructure. Benefits and Arguments • Allows loads to be ...

Picture shows pre-production model. CODE CWC 76 PARTITION/ WALLS PARTITION, FULL Full bulkhead cargo partition Details and Technology The grey, sheet-metal full bulkhead for Cargo Vans. Benefits and Arguments • Cargo-retaining function • Cab can be heated up more quickly The bulkhead helps protect t...

CODE CXG 77 STORAGE COMPARTMENT IN I/P w/LID INTERIOR Hinged lid for storage compartment Details and Technology The storage compartment in the centre of the instrument panel has a hinged lid. The compartment can be opened by means of the handle on the lid. The lid is held open on reaching the end-of...

CODE CXX 78 SEATING DRIVER’S SUSPENSION SEAT Driver’s suspension seat Details and Technology The vehicle is equipped with a comfort driver’s seat and a mechanically/hydraulically suspended seat frame. By means of an adjustment wheel, the mechanical suspension (a spring assembly) can be adapted to th...

CODE DGZ 80 POWERTR AIN AUTOMATIC TRANSMISSION Five-speed automatic transmission with Auto/Stick™ Details and Technology The fully automated, electrohydraulic, five-speed transmission transfers power to the wheels via a torque converter with integrated lockup clutch. The lockup clutch minimizes powe...

CODE GAE 82 WINDOWS GLASS, DARK TINT (SUNSCREEN) Dark tinted windows in rear Details and Technology The rear windows, and all side windows in the rear section, are dark grey-tinted (approximately 90 % tinting) . The windshield and the windows in the driver and passenger doors are green-tinted. Benef...

CODE GBB 83 WINDSHIELD GLASS, TINTED WINDOWS Tinted windshield Details and Technology The front windshield is green-tinted laminated glass, while the other windows are made of single layer safety glass. Benefits and Arguments • Significantly reduces heating of the interior Due to the tinting, heatin...

Picture shows pre-production model. CODE GBE 84 WINDOWS WINDSHIELD GLASS w/FILTER BAND Tinted glass with filter band for windshield Details and Technology Green-tinted glazing, with darker tinted area along the upper edge of the windshield. The windshield is made of laminated glass, while the other ...

CODE GBG 85 HEATED WINDSHIELD WINDOWS Heated windshield Details and Technology Laminated windshield with thin, wavy, vertically aligned heating filaments. The windshield heating is controlled by a switch with an indicator light. It can only be operated when the engine is switched on. The heating fun...

CODE GEH 86 WINDOWS REAR WINDOW WIPER/WASHER Windows inrear doors with wash/wipe system Details and Technology Two windows with two wipers are fitted in the rear doors. The fluid is supplied from the central windshield washer reservoir via flexible lines to nozzles on the wiper blades. The wipers ar...

CODE GEV 87 WINDOWS WINDOW, CHASSIS CAB, REAR WALL Window in cab rear wall Details and Technology On Chassis Cabs, a window made of single layer safety glass, size 1330 millimetres (52.36 inches) x 360 millimetres (14.17 inches), is fitted in the cab rear wall. Benefits and Arguments • Improved rear...

CODE GFA 89 WINDOWS REAR WINDOW DEFROSTER Heated rear windows Details and Technology Windows with heating filaments are fitted in the rear doors. The rear window heating function is switched on and off by means of a switch with an indicator light. The rear window heating function can only be switche...

CODE GFW 90 WINDOWS SUNROOF, REAR – FIXED Fixed sunroof(s) (rear roof section) Details and Technology 3665-millimetre (144.3-inch) wheelbase vehicles are fitted with a further fixed sunroof, of the same dimensions, in the rear part of the roof. 4325-millimetre (170.3-inch) wheelbase vehicles and 432...

Picture shows pre-production model. CODE GK A 92 DOORS SLIDING RIGHT SIDE DOOR Sliding door at right Details and Technology Sliding load compartment door on the right hand side of the vehicle. The size of the door depends on wheelbase and roof height.Width and height of door aperture (W x H) :• 1300...

CODE GLF 94 DOORS REAR DOORS Two 270-degree hinged rear doors Details and Technology The rear doors are fitted with special hinges which allow them to be opened to 90 and approximately 270 degrees. When fully open, the doors lie more or less flat against the sides of the vehicle and are held in posi...

CODE GNA 95 REAR-VIEW MIRROR MIRRORS Interior day/night rear-view mirror Details and Technology An automatically dimming interior mirror is bonded onto the front windshield. Benefits and Arguments • Easier manoeuvring • Enhanced safety The interior mirror improves rearward visibility, and is thus pa...

CODE GTB 96 MIRRORS EXTERIOR MIRROR, POWER/HEATED Heated and electrically adjustable exterior mirrors Details and Technology The exterior mirrors are heated and electrically adjustable. Adjustment is performed by means of a switch and a left/right selector in the driver’s door. The mirror heating is...

CODE GWA 98 WINDOWS SUNROOF, FRONT – POWER Power tilting/sliding glass sunroof Details and Technology The tilting/sliding glass sunroof consists of single layer safety glass (approximately 90 % tinted) and an integrated, continuously adjustable sunblind. The dimensions of the tilting/sliding glass s...

CODE GXQ 100 DOORS SLIDING DOOR TWO-STAGE OPENING/CLOSING Intermediate stop for sliding load compartment door/doors Details and Technology An intermediate stop that also allows the sliding load compartment door to be opened by approximately 787 millimetres (31 inches) . The full open position is 130...

CODE HB9 102 HEATING /COOLING AUXILIARY HEATER (AIR) Auxiliary electric hot air heater Details and Technology The heater booster consists of radiator elements (fins) which are fitted with PTC (Positive Temperature Coefficient) resistors and are held together in a mounting frame by spring clips. When...

CODE HBD 103 HEAVY-DUTY REAR AIR CONDITIONING, ROOF-MOUNTED HEATING /COOLING High-performance rear passenger compartment air conditioning Details and Technology The high-performance rear air conditioning system available on Passenger Van is fitted in the front sunroof aperture over the rear compartm...

Picture shows pre-production model. CODE HGM 106 HEATING /COOLING INSULATION, FRONT Insulation for cab Details and Technology Additional insulation material is fitted in the doors and, on chassis versions with cab, also in the cab rear wall. In the case of Chassis Cab, the entire cab is insulated. B...

CODE HGR 107 INSULATION, REAR HEATING /COOLING Insulation for load compartment/rear passenger compartment Details and Technology Additional insulation material is fitted up to waistline level in the side walls of the load compartment/passenger compartment and in the rear doors. Benefits and Argument...

Picture shows pre-production model. CODE JAV 108 INSTRUMENTATION INSTRUMENT CLUSTER w/PIXEL MATRIX DISPLAY Instrument cluster with pixel matrix display Details and Technology The instrument cluster with pixel matrix display is comprised of an analogue speedometer (left), a tachometer with fuel gauge...

CODE JHT 110 LIGHTING HEADLAMP CLEANING SYSTEM High pressure headlamp cleaning system Details and Technology Two high-pressure water jet nozzles are situated under each light unit. If the windshield washer is operated when the headlamps are switched on, the nozzles are automatically extended and the...

CODE JK A 112 SAFET Y GLOVEBOX LOCK Lockable glove compartmentwith light Details and Technology The glove compartment lid is fitted with a locking cylinder and a light. The key is the same mechanical key which is also used for the doors and the steering wheel lock. Benefits and Arguments • Convenien...

Picture shows pre-production model. Picture shows pre-production model. CODE JKP 114 ELEC TRICAL 12-VOLT POWER OUTLET, REAR 12-volt power outlet in luggage compartment/load compartment Details and Technology 12-volt socket in left hand D-pillar trim of the Passenger Van and Cargo Van. The Passenger ...

CODE LBB 116 LIGHTING COURTESY EXIT LIGHTS Illuminated exits Details and Technology The exit lights are integrated in the driver and front passenger doors. They direct their light down onto the ground when the doors are opened. When a rubber mat is ordered for the load compartment/passenger compartm...

CODE LC1 118 LIGHTING CEILING LIGHTS Ceiling lighting in load compartment Details and Technology A ceiling light is fitted in the centre of roof, on the rearmost roof bow. A second ceiling light is fitted centrally on the C-pillar bow. The manual on/off switch is located on the rear portal light (st...

CODE LCQ 120 LIGHTING CONVENIENCE LIGHTING Convenience lighting in load compartment/passenger compartment Details and Technology The standard interior lights have an additional switch on the dashboard and a switch on the light in each seat row. The switch on the light in each seat row only operates ...

CODE LH2 122 INTERIOR LOAD-SECURING RINGS DELETION Deletion of load-securing rings Details and Technology No load-securing rings are fitted in the floor. Since the rings are also used for mounting the wood floor, deletion of the rings means that a wood floor cannot be fitted. The threaded holes are ...

CODE LM3 123 BI-XENON HEADLAMPS LIGHTING Bi-xenon (HID) headlamps with cornering light function Details and Technology The bi-xenon headlamp light source is a gas-discharge light which produces a luminous arc in a quartz bulb filled with a gas mixture. The main beam is produced using the full light ...

CODE LNJ 124 LIGHTING FOG LAMPS Halogen fog lamps Details and Technology An additional halogen bulb is fitted in the unoccupied chamber in the light unit under the low beam (upper left) . The reflector behind this bulb directs the light a short way in front of the vehicle, and also to the left and r...

Picture shows pre-production model. Picture shows pre-production model. CODE MBZ 126 EXTERIOR REAR BUMPER w/STEP Rear door step Details and Technology A slip-resistant step is fitted at the rear of the vehicle, extending across the full width of the doors. Even in combination with primed bumper/corn...

CODE MC3 127 BUMPERS, PRIMED EXTERIOR Bumpers/corner sections primed in clear white Details and Technology The bumpers and corner sections are prepared ready for application of any shade of topcoat. Benefits and Arguments • Allows subsequent painting The bumpers and corner sections are paintable in ...

CODE MKB 128 EXTERIOR REAR BUMPER, METAL Wide rear step Details and Technology A hot-dip-galvanized steel step is fitted at the rear of the vehicle. The step measures 1600 millimetres (63.0 inches) (width) by 300 millimetres (11.8 inches) (depth) . Solid rubber mouldings on the outer left and right ...

CODE MWE 130 EXTERIOR ROOF RACK RAILS Mounting rails for roof racks Details and Technology Two recessed longitudinal stainless steel C-rails are bolted to the roof. Maximum roof load (including basic carrier bars) is 50 kilograms (110 pounds) per crossbar. Maximum roof load for the Standard Roof is ...

CODE MWJ 131 HIGH ROOF EXTERIOR High Roof Details and Technology Includes high side walls and higher rear doors, giving an interior height in the load compartment/passenger compartment of 1940 millimetres (76.4 inches) . The rear doors are 1840 millimetres (72.4 inches) high. The maximum load capaci...

European model shown. CODE MX1 132 EXTERIOR MEGA ROOF – PAINTED Mega Roofroof painted in body colour Details and Technology The Mega Roof in vehicle colour is a fibreglass-reinforced plastic roof shell which is attached to the high side wall by means of a bonding frame. The Mega Roof itself is unlin...

Picture shows pre-production model. CODE NHM 134 INSTRUMENTATION SPEED CONTROL Speed control Details and Technology Speeds upward of 29 km/h (18 mph) can be stored using the speed control stalk on the steering column. Speed control then maintains a constant speed. Operating the speed control stalk: ...

Picture shows pre-production model. CODE NHX 136 HEATING /COOLING ROOF FAN, ELECTRIC Electric roof fan Details and Technology The electric roof fan is an intake and extractor fan with a capacity of 5800 litres (206 cubic feet)/min. Maximum power input is 32 watts. The fan is situated centrally on th...

CODE NHY 137 ROOF VENT HEATING /COOLING Roof vent Details and Technology The mechanical roof fan is an intake and extractor fan. The fan is situated centrally on the roof, toward the rear of the sliding load compartment door. The roof fan increases the overall height of the vehicle by approximately ...

Picture shows pre-production model. CODE NXF 138 POWERTR AIN RPM GOVERNOR, ADJUSTABLE Variable electronic rpm governor (adjustable idle control) Details and Technology This electronic rpm governor maintains a constant rpm, e.g., for auxiliary belt drive operation. Under load change, rpm may fluctuat...

CODE RBE 140 ENTERTAINMENT AM/FM STEREO WITH SINGLE CD PLAYER Standard radio with all models Details and Technology AM/FM stereo with single CD player Radio features: Ten station presets per FM band and five per AM band, rotary volume control, speed-dependent volume adjustment, SCAN function (plays ...

Picture shows pre-production model. Picture shows pre-production model. CODE RC5 142 ENTERTAINMENT RADIO SPEAKERS, FRONT AND REAR Two-way loudspeakers front and rear on Passenger Van Details and Technology Two-way loudspeaker system: four tweeters and four mid-range woofers fitted in the side wall/s...

Picture shows pre-production model. Picture shows pre-production model. CODE RDK 144 ENTERTAINMENT RADIO ANTENNA Antenna for AM/FM, GSM, UMTS Network and GPS Details and Technology A common roof-mounted antenna is used for radio (FM, AM, navigation, and telephone) . The antenna can be removed from t...

CODE SCK 146 ENTERTAINMENT STEERING WHEEL WITH MULTIFUNCTION CONTROLS Multifunction steering wheel with radio controls Details and Technology Multifunction steering wheel with four steering wheel buttons. In addition to the horn, it is also possible to operate the onboard computer and the radio from...

CODE SHA 148 CHASSIS FRONT STABILIZER BAR, HIGH CAPACITY Higher capacity (heavy-duty) front stabilizer bar Details and Technology A higher capacity (larger diameter) stabilizer bar is mounted to the control arms and axle housing. The stabilizer is a torsion bar made of spring steel and is fitted tra...

CODE SHC 149 CHASSIS REAR AXLE STABILIZER BAR Rear-axle stabilizer bar under frame Details and Technology The stabilizer bar is made of spring steel and is fitted behind and parallel to the axle and transversely to the direction of travel. It is attached at two points to the axle tube and at two poi...

Picture shows pre-production model. Picture shows pre-production model. 150 CODE SHJ FRONT STABILIZER BAR CHASSIS Front stabilizer bar Details and Technology A stabilizer bar is mounted to the control arms and axle housing. The stabilizer is a torsion bar made of spring steel and is fitted transvers...

CODE SHK 151 CHASSIS CAMPER BODY STABILIZER BAR Heavy-duty stabilizing package for chassis with camper body Details and Technology Modified suspension package, available only for special-purpose chassis versions, e.g., tall camper vans. Chassis Cabs with 5003-kilogram (11,030-pound) GV W are fitted ...

CODE SUD 153 INTERIOR TILT/TELESCOPING STEERING WHEEL Steering wheel adjustable for tilt and height Details and Technology The steering wheel is manually adjustable for height and reach. To provide a large adjustment range, the wheel can be tilted in a range between 28° and 32° from the vertical and...

154 CODE WMP WHEEL CHOCK WHEELS/TIRES Chock Details and Technology Cargo Van models have a chock holder mounted on the D-pillar at the rear right of the cab. Chassis Cab versions have a chock holder mounted on the left at the frame end. Benefits and Arguments • Secures the vehicle against rolling on...

CODE WNB 155 WHEELS/TIRES 16" ALUMINUM WHEELS 6.5 J x 16 light-alloy wheels Details and Technology Four 6.5 J x 16 light-alloy wheels with longer wheel bolts (72 millimetre [2.87 inches]) . Benefits and Arguments • Enhances the look of the vehicle The light-alloy wheels enhance the look of the v...

CODE XA2 157 ELEC TRICAL BATTERY JUMP START TERMINAL Jump start terminal Details and Technology A jump start terminal (positive pole) is fitted in the engine compartment, to the left of the air filter. The jump start terminal can be accessed by pushing back the red protective cap. Benefits and Argum...

CODE XA3 158 BACKUP CAMERA PREP* SAFET Y Pre-installation for reversing aid (reversing camera) Details and Technology The pre-installation kit allows easy retrofitting of a reversing camera. The reversing camera improves rearward visibility during reversing/reverse manoeuvring. Benefits and Argument...

CODE XA4 159 ELEC TRICAL AUXILIARY BATTERY DISCONNECT Cutout relay for additional battery Details and Technology The relay is installed on the charge line to the auxiliary battery. It separates the starter battery circuits from the auxiliary battery circuits. When the engine is running, the relay al...

CODE XAG 161 SAFET Y PARKSENSE™*, FRONT AND REAR Details and Technology ParkSense operates on the echo sounder principle. The electronic control unit uses ultrasonic signals detected by sensors in the front and rear bumpers to measure the distance between the vehicle and an obstacle. When reversing,...

Details and Technology When reverse gear is selected with the ignition switched on, an exterior audible signal is activated. If reverse gear is engaged twice within four to five seconds, the volume of the reversing warning signal switches to the quieter setting. The reversing warning system cannot b...

CODE XCF 167 ELEC TRICAL PARAMETRIC SPECIAL MODULE (PSM) Parametric special module Details and Technology The parametric special module (PSM) provides an interface for accessing the vehicle electronic system. Vehicle information — for example, about rotary light switch positions, direction indicator...

CODE XCN 168 PRE-INSTALLATION PARAMETRICSPECIAL MODULE (PSM) WIRING ELEC TRICAL Electrical pre-installation, parametric special module Details and Technology The pre-installation includes the electric wiring up to the driver’s seat frame. Benefits and Arguments • Allows easy retrofitting of the para...

CODE XDP 169 SAFET Y ROAD HAZARD WARNING LAMP Road hazard warning lamp Details and Technology The warning lamp is stored close at hand in the driver’s door pocket. It can provide either a continuous white beam or a flashing orange light. Benefits and Arguments • Enhanced safety in the event of a bre...

CODE XEG 170 HYDRAULIC JACK WHEELS/TIRES Hydraulic jack Details and Technology A hydraulic jack is fitted in an easy-release bracket in the front passenger’s footwell. Benefits and Arguments • Easier tire changing

CODE XEN 171 SAFET Y FIRE EXTINGUISHER Fire extinguisher Details and Technology The fire extinguisher is attached by a quick-release mounting bracket to the front passenger seat base. Capacity: 2 kilograms (4.4 pounds) Benefits and Arguments • Quickly accessible since attached to front passenger’s s...

Picture shows pre-production model. CODE XFM 172 RPM GOVERNOR, PRESET POWERTR AIN Presetrpm governor (Preset idle control) Details and Technology This electronic rpm governor maintains a constant rpm, e.g., for auxiliary belt drive operation. Under load change, rpm may fluctuate by approximately +/–...

CODE XFS 173 POWERTR AIN SPEED GOVERNOR Road speed limited to 119 km/h (74 mph) Details and Technology The top speed is limited to 119 km/h (74 mph) via the engine management. Benefits and Arguments • For vehicles for which speed limitation is desired.

Picture shows pre-production model. Picture shows pre-production model. CODE XG3 176 AUXILIARY HEATER, WATER w/TIMER HEATING /COOLING Water auxiliary heater with timer, 10 kW Details and Technology The dual-function water auxiliary heater operates both as a heater booster and as an auxiliary (statio...

CODE XGF 177 ELEC TRICAL TAIL LIGHT WIRING EXTENDED Longer tail light electrical line Details and Technology The electrical lines leading to both tail lights are approximately 1.8 metres (six feet) longer than the standard-fit lines. They are rolled up and provisionally fastened to the frame. Benefi...

Picture shows pre-production model. CODE XJW 180 PARTITION w/WINDOW PARTITION/ WALLS Full bulkhead with one window Details and Technology The panel van is fitted with a grey, sheet-metal full bulkhead with central fixed window, size 1295 millimetres (51 inches) x 330 mm (13 inches) . Benefits and Ar...

CODE XWA 183 SAFET Y FIRST AID KIT First aid kit Details and Technology First aid kit to provide initial care for the injured. Benefits and Arguments • Allows initial care to be provided for injured persons • Conveniently located for quick access • Takes up little room The first aid kit can be used ...

CODE XZB 185 CHASSIS REAR SPRINGS, FIRMER Firmer rear springs Details and Technology Two-leaf springs with a steeper spring rate curve than the standard springs. The firmer rear springs are approved for Chassis Cab versions only in conjunction with the stabilizing package (SHK) . Benefits and Argume...

CODE XZF 187 ELEC TRICAL PRE-INSTALLATION, ADDITIONAL TURN SIGNALS Electrical pre-installation for additional direction indicators Details and Technology Additional electric wiring is routed through to the rear of the vehicle. Benefits and Arguments • Easy fitting of additional direction indicators ...

CODE XZJ 189 EXTERIOR PREPARATION FOR SEA TRANSPORT Preparation for sea transport Details and Technology The radiator grille and fan slits are sealed in order to prevent penetration by water and salt. Benefits and Arguments • Enhanced protection from environmental damage during transport or storage ...

Picture shows pre-production model. Picture shows pre-production model. CODE XZK 190 LASHING RAILS, UPPER PARTITION/ WALLS Lashing rails along sides of vehicle at roof frame Details and Technology Bonded lashing rails are fitted along the sides of the vehicle, below the roof frame, though not on the...

CODE XZL 191 INTERIOR FLOOR, ALUMINUM EDGE Protective aluminum entrance panel for wood floor Details and Technology A protective aluminum panel is fitted along the edge of the wood floor in the entrance area/areas at the sliding door/doors. The wood floor is cut out in this area and the panel is the...

SPECIFICATIONS 192 2007 DODGE SPRINTER 2500 CARGO VAN 2007 DODGE SPRINTER 2500 CARGO VAN SPECIFICATIONS Dimensions (1) /Specifications Roof Version Standard High High Mega High – EXT Wheelbase 3665 (144.3) 3665 (144.3) 4325 (170.3) 4325 (170.3) 4325 (170.3) Overall length 5910 (232.5) 5910 (232.5) 6...

2007 DODGE SPRINTER COLOURS 1. AMBER RED METALLIC* PV3 2. AQUA GREEN PPH 3. ARCTIC WHITE P01 4. BLACK BLUE* P02 5. BLACK GREY* P06 6. BRILLIANT BLUE* PCH 7. BRILLIANT SILVER METALLIC* PD3 8. BROOM YELLOW** P11 9. CALCITE YELLOW P03 10. CARBON BL ACK METALLIC* P09 11. COCA COL A RED** P12 12. FLAME R...