Dewalt DWV015 - User Manual
Dewalt DWV015 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENT; Specification of the anchor
- Page 4 – SPECIFICATION OF THE ANCHOR; Refer to Installation Parameter Section
- Page 5 – Preset Anchor Installation System Components; Thrubolt Anchor Installation System Components
- Page 7 – B. Installation instructions; GENERAL / GETTING PREPARED; PRIMARY HOLE DRILLING
- Page 9 – REPLACING WEAR PARTS; Anchors; Press the pin on the undercutter using a screwdriver
- Page 12 – FOR TECHNICAL ASSISTANCE PLEASE CONTACT:; ICDWCCUMAN
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-
D
e
WALT
Instruction Manual
Guide D’utilisation
Manual De Instrucciones
CCU+
™
Critical Connection Undercut Anchoring System
final page size: 8.5 x 5.5 in
The D
e
WALT Critical Connection Undercut (CCU+
TM
) Anchoring system is a specified anchor system incorporating an
undercut anchor and various installation accessories and specific power tools. The contents of this manual will help guide
the installer through proper preparation, installation, maintenance and troubleshooting of the CCU+
TM
anchoring system.
This manual is not a substitute for construction drawings or specifications. CCU+
TM
anchors may be part of an engineered
structure. Proper anchor placement and installation are critical to the performance of the structure.
The installer should make sure they have the correct anchors, bits, hammers, vacs and accessories to install CCU+
TM
anchors as per any construction drawings.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Dewalt DWV015
Summary
2 TABLE OF CONTENT 1. The Critical Connection Undercut System (CCU+ ™ ) A. Anchor B. Primary bit C. Undercut bit D. Setting tool 2. Compliance A. ICC-ES B. OSHA C. MIUSA 3. Specification of the anchor A. Material B. Installation parameters 4. Installation A. Power tools and accessories B. Installati...
4 3. SPECIFICATION OF THE ANCHOR A. Material 1 4 5 2 3 1 - Rod2 - Sleeve3 - Cone4 - Nut5 - Washer Component No. Description Specifications Carbon Steel Version (A36 or B7) High Strength Stainless Steel (316 SS) 1 Rod ASTM A36 or ASTM A193 Grade B7, Zinc Plated ASTM B633, SC1 (Fe/Zn 5) ASTM A193, Gra...
5 B. Installation parameter In case of the Preset (PS), installation, the anchor is installed first, and then the attachment (fixture or baseplate) is put in place. SETTING LINE MUST BE VISIBLE AFTER INSTALLATION Preset Anchor Installation System Components Rod Dia. in. (mm) 3/8" 1/2" 5/8...
