Dewalt DW9116- User Manual

Dewalt DW9116

Dewalt DW9116– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
Page: / 15

Table of Contents:

  • Page 2 – CONTENTS; RETURNING REPAIR INSTRUCTIO
  • Page 4 – PHYSICAL DESCRIPTION; The main body of the XRS-4 is the tube head which contains; BASE
  • Page 5 – If the light does not work the X-ray unit will not pulse
  • Page 6 – DESCRIPTION; Remote switch inputs are activated when grounded.
  • Page 7 – DESCRIPTION OF OPERATION; not contain radioactive materials; BLOCK DIAGRAM
  • Page 8 – OPERATING INSTRUCTIONS
  • Page 11 – INSTRUCTIONS FOR REPAIR; the 5 screws in the back plate then pull the back plate off slowly
  • Page 12 – Follow all federal, state, and local laws for
  • Page 13 – STEP 2
  • Page 15 – SPARE PARTS AND ACCESSORIES FOR THE XRS-4; ITEM
Loading the manual

XRS-4

X-RAY SOURCE



OPERATOR’S MANUAL


"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Manuals for Dewalt DW9116

Summary

Page 2 - CONTENTS; RETURNING REPAIR INSTRUCTIO

- 1 - CONTENTS ITEM PAGE 1.0 INTRODUCTION................................................................................. 2 2.0 WARNINGS......................................................................................... 2 DUTY CYCLE……………………………………………………………. 2 3.0 PHYSICAL DESCRIPTION.............

Page 4 - PHYSICAL DESCRIPTION; The main body of the XRS-4 is the tube head which contains; BASE

3 3.0 PHYSICAL DESCRIPTION Figure 1: XRS-4 X-ray Unit HIGH VOLTAGE PULSER/TUBEHEAD. The main body of the XRS-4 is the tube head which contains the tube cavity, cold cathode type X-ray tube, spark gap, high voltage capacitor, and transformer. The standard collimator located on the front of the head l...

Page 5 - If the light does not work the X-ray unit will not pulse

4 3.5 CONTROL MODULE Figure 3: Control Module POWER ON LIGHT: Illuminates when battery voltage is applied to control module. RED X-RAY PULSING LIGHT: Blinks after time delay button or remote cable button is pressed to warn that the XRS-4 is going to pulse. The light stays on continuously while the X...

Other Dewalt Models

All Dewalt Other