Desa SH-5412 - Manual

Desa SH-5412

Desa SH-5412 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
Page: / 8

Table of Contents:

  • Page 2 – INSTALLATION; Turn power off at the fuse or circuit breaker.; Wall Mount; White
  • Page 3 – TEST AND ADJUSTMENT; Motion; SPECIFICATIONS; Maximum Range; Bottom of Sensor; Least Sensitive
  • Page 4 – TEN YEAR LIMITED WARRANTY; TROUBLESHOOTING GUIDE; No Service Parts Available for this Product
  • Page 5 – Requisitos; Características; Prueba; FUNCIONAMIENTO; Resumen de las modalidades del; PRUEBA; Control de luz
  • Page 6 – CONECTE EL CONTROL DE LUZ; INSTALACION; INSTALE EL CONTROL DE LUZ; Montaje en pared; ADVERTENCIA: Apague la energía en el fusible
  • Page 7 – Alcance Máximo; Parte de abajo del detector; Lo menos sensible
  • Page 8 – GUIA DE INVESTIGACION DE AVERIAS; GARANTÍA LIMITADA A 10 AÑOS; SERVICIO TÉCNICO; No hay piezas de servicio disponibles para este producto
Loading the manual

© 2006 DESA Specialty Products

598-1158-01

Requirements

• The Light Control requires 120-volts AC.
• If you want to use Manual Mode, the control must be

wired through a switch.

Some codes require installation by a qualified
electrician.

• This product is intended for use with the enclosed

gasket and with a junction box marked for use in wet
locations.

Model SH-5412

Light Control

Sensor

Cover

Plate

Lamp Holders

2 Wire

Connectors

6 Screws

(3 sizes included)

Gasket

2 Shells

Features

• Turns on lighting when motion is detected.
• Automatically turns lighting off.
• Photocell keeps the lighting off during daylight hours.
• LED indicates motion was sensed (day or night).

Motion

Sensor Light

Control

Mounting Bolt

Mounting Strap

Plastic

Hanger

Rubber Plug

Mode:

On-Time:

Works: Day Night

Test

5 Sec

x

x

Auto

1, 5, 10 min.

x

Manual

Until Dawn*

x

OPERATION

* resets to Auto Mode at dawn.

Note:

When first turned on wait about 1

1

/

2

minutes for

the circuitry to calibrate.

MANUAL MODE

ON-TIME

10 5 1

TEST

10 5 1

TEST

ON-TIME

TEST

... back on.

AUTO

1 Second OFF

then...

Put the ON-TIME switch in the 1, 5,
or 10 minute position.

Put the ON-TIME switch on the bottom
of the sensor in the TEST position.

Manual mode only works at night
because daylight returns the sensor
to AUTO.

Flip the light switch off for one second
then back on to toggle between AUTO
and MANUAL MODE.

Manual mode works only with the
ON-TIME switch in the 1, 5, or 10
position.

Move ON-TIME Switch to

1, 5, or 10 minutes

Mode Switching Summary

Flip light switch off

for one second then

back on*

MANUAL MODE

AUTO

TEST

* If you get confused while switching modes, turn the

power off for one minute, then back on. After the cali-
bration time the control will be in the AUTO mode.

This package includes:

As an ENERGY STAR

®

Partner, Heath

®

/Ze-

nith has determined that this product meets
the ENERGY STAR

®

guidelines for energy

efficiency. This product is ENERGY STAR

®

compliant when used with 120 Watt bulbs.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - INSTALLATION; Turn power off at the fuse or circuit breaker.; Wall Mount; White

2 598-1158-01 INSTALLATION For easy installation, select an existing light with a wall switch for replacement. W IRE THE L IGHT C ONTROL ❒ Turn power off at the fuse or circuit breaker. ❒ Remove the existing light fixture. ❒ Install the mounting strap as shown using two screws that fit your junction b...

Page 3 - TEST AND ADJUSTMENT; Motion; SPECIFICATIONS; Maximum Range; Bottom of Sensor; Least Sensitive

3 598-1158-01 TEST AND ADJUSTMENT ❒ Turn on the circuit breaker and light switch. Motion Motion The detector is most sensitive to motion across its field of view. ❒ Loosen the clamp screw in the sensor ball joint and gently rotate the sensor. ❒ Walk through the coverage area noting where you are when...

Page 4 - TEN YEAR LIMITED WARRANTY; TROUBLESHOOTING GUIDE; No Service Parts Available for this Product

4 598-1158-01 SYMPTOM Lights will not come on. L i g h t s c o m e o n in daylight. L i g h t s c o m e o n f o r n o a p p a r e n t reason. POSSIBLE CAUSE 1. Light switch is turned off. 2. F l o o d l i g h t i s l o o s e o r burned out. 3. Fuse is blown or circuit breaker is turned off. 4. Dayli...

Other Desa Models