Desa 598-1034-02 - Manual
Desa 598-1034-02 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Code and Tune Settings
- Page 4 – Troubleshooting; Regulatory Information; No Service Parts Available for this Product
- Page 5 – ONE YEAR LIMITED WARRANTY
- Page 6 – Funcionamento; Timbre
- Page 7 – Programaciones del código y del tono
- Page 9 – No hay piezas de servicio disponibles para este producto
- Page 10 – GARANTÍA LIMITADA A 1 AÑO
© 2003 DESA Specialty Products™
598-1034-02
Wireless
Plug-In
Doorbell
System
Your doorbell system includes:
•
Two plug-in doorbell chimes
•
Two doorbell buttons/transmitters
with batteries
•
Two hardware packs
To reduce the risk of electrical shock, this
equipment has a polarized plug (one blade is
wider than the other). This plug will fit in a po-
larized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician
to install the proper outlet. Do not change the
plug in any way.
1.
Plug-in the doorbell chime.
2.
Before mounting, test the doorbell range.
Plug-in the chime where you want to mount it
and temporarily place the doorbell button on the
doorjamb. Press the doorbell button.
Press the doorbell button to verify that the
doorbell and chime work properly. If the chime
does not sound see the Troubleshooting guide
on page 4.
Operation
Push
Button
Doorbell Button
As shipped from the factory:
•
Both chimes will sound when either button is pushed. The system can be
changed so that one chime responds to the factory set door button, while
the other chime responds to a new customer setting.
•
See pages 2 and 3 to change codes and sounds.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
-2- 598-1034-02 3. Mount the doorbell button. Use either screws or double sided tape to mountthe doorbell button. To mount with screws, remove the back of the case by pushing in the tab onthe bottom with a small screwdriver and rotating the blade. Attach the back of the case to the door jamb or wall...
-4- 598-1034-02 Troubleshooting Chime does not sound:• Make sure the doorbell button and the chime codes are the same (Seepages 2 and 3). • Check orientation of doorbell button battery (See page 3). • Check the doorbell button battery, replace if necessary. Batteries seem OK, but the chime does not ...
-5- 598-1034-02 DESA Specialty Products™ reserves the right to discontinue and to changespecifications at any time without notice without incurring any obligation toincorporate new features in previously sold products. ONE YEAR LIMITED WARRANTY This is a “Limited Warranty” which gives you specific l...
