Delta SS350 - Manual

6 EXTENSION CORDS FOREWORD Delta ShopMaster Models SS350 and SS350LS 16" Scroll Saws are designed to give high quality, smooth cuttingperformance with capacity to cut up to 16" wide by 2" thick woodworking materials and have a 3/4" stroke. DeltaShopMaster Models SS350 and SS350LS com...

7 CARTON CONTENTS Fig. 1 1. Scroll Saw FOR MODEL SS350LS ONLY 2. Stand Leg (3)3. Lower Side Brace 30" Long (2)4. Upper Side Brace 22½" Long (2)5. Lower Back Brace 18½" Long (1) 1 2 3 4 5 6 7 MODEL SS350LS ONLY MODEL SS350LS ONLY 8 9 10 11 12 13 6. Upper Back Brace 12" Long (1)7. Stan...

8 ASSEMBLY FOR YOUR OWN SAFETY, DO NOT CONNECT THE MACHINE TO THE POWER SOURCE UNTIL T H E M A C H I N E I S C O M P L E T E LY A S S E M B L E D A N D Y O U R E A D A N D U N D E R S TA N D T H E E N T I R EINSTRUCTION MANUAL. STAND (FOR MODEL SS350LS ONLY) NOTE: THE ASSEMBLY OF THIS STAND WILL USE...

9 FASTENING SCROLL SAWTO SUPPORTING SURFACE This scroll saw MUST be securely fastened to a stand or workbench using the three holes, two of which areshown at (A) Fig. 4. The third hole is at the rear of themachine. An alternate method of securing the scroll saw to a sup-porting surface is to fasten ...

13 TABLE INSERT DISCONNECT MACHINE FROM POWERSOURCE. The table insert (A) can be positioned in the saw table withthe opening in the insert pointing to the front of the table,as shown in Fig. 18, or to the right as shown in Fig. 19. With the table in the level position, 90° to the blade, theinsert (A...

14 OPERATIONS FOLLOWING A LINE With your scroll saw you should be able to perform straight or curved cuts with ease. Most beginners will experienceblade wandering; however, they eventually learn to control it as they become more familiar with the machine. Use scrapmaterial to practice cuts before st...

15 MAINTENANCE CHANGING BLADES Fig. 22 B A 2. Push upper blade chuck locking lever (C) Fig. 23, tothe rear as shown. This will release the blade (D) fromthe upper chuck (E). Fig. 23 E C D 3. Remove the dust collection cup (A) by rotating knob(B) 90° as shown in Fig. 24. Slide dust cup out of theguid...

16 4. Push lower blade chuck locking lever (F) Fig. 25, tothe rear as shown. This will release the blade (G) fromthe lower chuck (H). Fig. 25 F G H I J L Fig. 26 5. Insert new blade (I) Fig. 26, into the upper bladeholder (J) making certain the blade teeth are pointingdown toward the table. Push upp...

17 PARTS, SERVICE OR WARRANTY ASSISTANCE All Delta Machines and accessories are manufactured to high quality standards and are serviced by a networkof Porter-Cable • Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional information regarding your Delta quality pro...

18 Two Year Limited New Product Warranty Delta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine accessorywhich in normal use has proven to be defective in workmanship or material, provided that the customer returns the productprepaid to a Delt...