DeLonghi ESAM3500- Manual

Page 6 - INDEX

INDEX 1 DESCRIPTION OF THE APPLIANCE (see page 3) . . . . . . . . . . . . . . . . . . . . . . .242 SAFETY WARNINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .243 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

Page 8 - INSTALLATION; USING FOR THE FIRST TIME; PRESS OK TO INSTALL ENGLISH

3 INSTALLATION • After unpacking, make sure the appliance is complete and undamaged. If in doubt, do not use it. Contact professionally qualified personnel. • The packing elements (plastic bags, polystyrene foam, etc.) should be kept out of the reach of children as they are a safety hazard. • Place ...

Page 9 - TURNING OFF PLEASE WAIT; TURNING ON AND PREHEATING; READY STANDARD TASTE; PREPARING COFFEE (USING COFFEE BEANS)

5. The appliance displays: TURNING OFF PLEASE WAIT and it goes off. 6. Fill the container with coffee beans (fig. 5). IMPORTANT: to prevent malfunction, never fill with ground coffee, freeze dried coffee, caramelised beans or anything else which could damage the appliance. 5 TURNING ON AND PREHEATIN...

Page 10 - FILL TANK; EMPTY GROUNDS CONTAINER; GROUND TOO FINE ADJUST MILL AND

27 NOTE 2: If the coffee is delivered too fast and is not creamy enough, turn the grinding coarseness regulator (fig. 12) one click anticlockwise (see section 8).Avoid turning the grinding coarseness regulator excessively otherwise when you select 2 cups, the coffee mayrun out in drips. NOTE 3: Tips...

Page 11 - If the appliance malfunctions,; CHANGING THE QUANTITY OF COFFEE IN THE CUP

28 When using the appliance for the first time, 4-5 cups of coffee need to be made before the applian-ce starts to give satisfying results. If the appliance malfunctions, do not contact the service centre straight away. The problem can almost always be resolved by following the instructions indicate...

Page 12 - 0 PRODUCING HOT WATER; HOT WATER

9 PREPARING ESPRESSO COFFEE WITH PRE-GROUND COFFEE (INSTEAD OF BEANS) • Press the button (fig. 16) to select the ground coffee function. This disables the coffee mill function. The appliance displays: READY PRE-GROUND • Lift the lid in the centre, place one measure of ground coffee in the funnel (se...

Page 13 - 1 CHANGING THE QUANTITY OF HOT WATER; HOT WATER PROGRAM QUANTITY; 2 PREPARING CAPPUCCINOS (FROTHED MILK AND COFFEE); Never; CAPPUCCINO; CLEANING

11 CHANGING THE QUANTITY OF HOT WATER The appliance is factory preset to automatically deliver 250 ml of hot water.To change these quantities, proceed as follows:• Attach the water spout (fig. 4).• Position a container under the spout (fig. 3).• Press the button for at least 2 seconds then release. ...

Page 14 - 3 PREPARING FROTHED MILK (WITHOUT COFFEE); MILK FROTHING; 4 CHANGING THE QUANTITY OF COFFEE AND MILK FOR CAPPUCCINOS; MILK FOR CAPPUCCINO PROGRAM QUANTITY; COFFEE FOR CAPPUCCINO PROGRAM QUANTITY; 5 CLEANING AND MAINTENANCE; Cleaning the coffee maker

13 PREPARING FROTHED MILK (WITHOUT COFFEE) • Remove the lid of the milk container.• Fill the container with the quantity of milk you want to prepare (fig.19).• Replace the milk container lid.• Attach the milk container to the appliance (fig. 22).• Place a sufficiently large cup under the milk spout ...

Page 15 - CORRECTLY

32 CORRECT INCORRECT The two red buttons have snapped out CORRECTLY The two red buttons have notsnapped out • turn the appliance off by pressing the button (fig. 6) (do not unplug) and wait for the display to go off; • open the service door (Fig. 14);• remove the drip tray and the grounds container ...

Page 16 - Cleaning the milk container; 6 CHANGING AND SETTING THE MENU PARAMETERS; Setting the clock

33 NOTE 3: If it is still hard to insert the infuser, leave it out of the appliance, close the service door, unplug from the mains, then plug in again. Wait for all the lights to go off after the self-diagnosis, then open the door andreplace the infuser. 15.3 Cleaning the milk container Proceed as f...

Page 18 - RINSING; RISRINSING COMPLETE PRESS OK; Changing coffee temperature; Changing the length of time the appliance remains on; WATER HARDNESS 4

RINSING • When the water tank is empty, the appliance displays the message: RISRINSING COMPLETE PRESS OK • Press the OK button and refill the water tank with clean water.• The descale programme is now terminated and the appliance is ready to make coffee again. NOTE: if the descaling cycle is interru...

Page 19 - 7 CHANGING THE LANGUAGE; MESSAGE

16.7 Resetting factor y default settings (reset) If you change the original values, the factory default values can be reset as follows:• Press the button then press repeatedly until the appliance displays: RESET TO DEFAULT NO • Press the button and the appliance displays "RESET TO DEFAULT YES:• ...

Page 20 - 9 PROBLEMS TO BE RESOLVED BEFORE CALLING THE SERVICE CENTRE

37 PRESS NEXT CHANGE • After cleaning, the infuser has probablybeen left out of the coffee maker. • Leave the service door closed and theinfuser out of the appliance, then followthe instructions displayed. CLOSE DOOR • The service door is open • If the service door cannot be closed,check that the in...

Table of Contents:

Summary

Other DeLonghi Models