Dell S2340T- User Manual

Velcro strap Drivers and Documentation media Quick Setup Guide Product and Safety Information Guide Product Features The S2340T flat panel display has an active matrix, Thin-Film Transistor (TFT), Liquid Crystal Display (LCD). The monitor features include: ¦ 23 -inch (58.42 cm) viewable area display...

¦ Dell Display Manager software included (comes in the CD shipped with the monitor). ¦ TCO 6.0 certified displays. ¦ Webcam with the resolution of FHD 1080p (1920x1080) and digital dual Mic input. ¦ USB audio input selected from OSD munu. ¦ Integrated Gigabit USB Dock Ethernet (10/100/1000Mbit). ¦ A...

1 Webcam with MIC (Only for USB device) 2 Preset Modes (default, but configurable) 3 Brightness & Contrast (default, but configurable) 4 Menu 5 Exit 6 Power 7 Light Indicates Back and Bottom View Label Description Use 1 DC power cord connector Connect the power cord. 2 HDMI connector Connect to ...

5 USB upstream port Connect to devices with USB Host. Once this cable is connected, you can use the docking features and available USB ports on the side and back. 6 RJ45 connector Support Ethernet connection 10/100/1000 Mbps. 7 Security Lock Secures monitor with security cable lock. 8 Barcode serial...

4 USB downstream ports Monitor Specifications Flat Panel Specifications Screen type Active matrix - TFT LCD Panel type In -plane switching technology Screen dimensions 23 inches (23-inches viewable image size) Preset display area: 533.2 (H) x 312.0 (V) mm Horizontal 533.2 mm (20.99 inches) Vertical ...

Preset Display Modes Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical) VGA, 720 x 400 31.5 70.0 28.3 -/+ VGA, 640 x 480 31.5 60.0 25.2 -/- VESA, 640 x 480 37.5 75.0 31.5 -/- VESA, 800 x 600 37.9 60.0 40.0 +/+ VESA, 800 x 600 46.9 75...

Activate the computer and the monitor to gain access to the OSD. NOTE: This monitor is ENERGY STAR ® -compliant. (except APJ) * Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.** Maximum power consumption with max luminance, max audio, Touch, ...

Overview The integrated USB camera and digital microphones allow you to take pictures, videos, and communicate with other computer users. The camera is located at the top of the monitor and is fixed. When the camera is on, the white light next to the camera turns on. Lens Field of view 66.2 degree +...

DP_PWR Return 10 ML3(p) 20 +3.3 V DP_PWR 9 TMDS DATA 0- 19 HOT PLUG DETECT 10 TMDS CLOCK Plug and Play Capability You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Disp...

5 StdB_SSTX- 6 StdB_SSTX+ 7 GND_DRAIN 8 StdB_SSRX - 9 StdB_SSRX+ Shell Shield 5 StdA_SSRX - 6 StdA_SSRX+ 7 GND_DRAIN 8 StdA_SSTX- 9 StdA_SSTX+ Shell Shield USB Ports 1 upstream - back 4 downstream - 2 on back; 2 on r ight side NOTE: USB 3.0 functionality requires a USB 3.0 compatible computer. NOTE:...

Pin 8 Not Used Not Used Pin 8 BI_D4- Bi-directional Data- LCD Monitor Quality and Pixel Policy During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state . These pixels are hard to see and do not affect the display quality or usabil...

Back to Contents Page Setting Up the Monitor Dell™ S2340T Monitor User's Guide Connecting the Monitor Organizing Your Cables Connecting Your Monitor WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions . To connect your monitor to the computer: 1. Turn off ...

Connecting the HDMI Cable CAUTION: The Graphics are used for the purpose of illustration only. Appearance of the computer may vary.

After you have completed connecting the HDMI/DP cable, follow the procedure below to connect the USB cable to the computer and complete your monitor setup: 1. I nstall the DisplayLink drivers from the Resource CD. 2. Change input source to USB. 3. Connect the upstream USB port (cable supplied) to an...

After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the Velcro strap to organize all cables as shown above. Back to Contents Page Organizing Your Cables

Back to Contents Page Operating the Monitor Dell™ S2340T Monitor User's Guide Using the Side Panel Controls Using the On -Screen Display (OSD) Menu Setting the Maximum Resolution USB Display, USB Audio, USB Ethernet set up Using the Tilt and Touch Usage Scenario Using the Side Panel Controls Use the...

4 Exit Use this button to go back to the main menu or exit the OSD main menu. 5 Power Use the Power button to turn the monitor on and off. 6 Light indicator The white LED indicates the monitor is on and fully functional. A glowing white LED indicates DPMS power save mode. Using the On-Screen Display...

When there is no input source and if the user selects 'USB', a dialogue will pop up and disappear after 4 seconds: When user selects 'Power Saver' mode, a dialogue will pop up and disappear after 4 seconds: OSD Warning Messages When Dynamic Contrast Feature is enabled (in these modes: Game and Movie...

or See Solving Problems for more information. Setting the Maximum Resolution To set the Maximum resolution for the monitor: Windows Windows ® 7, Windows ® 8: 1. For Windows ® 8 only, select the Desktop tile to switch to classic desktop. 2. Right-click on the desktop and click Screen resolution . 3. ...

USB Display, USB Audio, USB Ethernet set up Only for Windows ® 7 or Windows ® 8 1. Intstal the included Driver CD. 2. Double click on Setup.exe. 3. Follow the on-screen instructions until the installation is complete. Using the Tilt and Touch Usage Scenario With the built-in stand, you can tilt the ...

Back to Contents Page Troubleshooting Dell™ S2340T Monitor User's Guide Self-Test Built -in Diagnostics In-Store Demo Common Problems Camera Problems Touch Problem Product Specific Problems Universal Serial Bus Specific Problems DisplayLink Specific Problems WARNING: Before you begin any of the proc...

If you do not detect any screen abnormalities upon using the built-in diagnostic tool, the monitor is functioning properly. Check the video card and computer. In-Store Demo To activate the In-Store Demo: 1. Turn on the monitor. 2. Unplug the video cable(s) from the back of the monitor. 3. Press and ...

Brightness Problems Picture too dim or too bright Reset the monitor to Factory Settings. Adjust brightness & contrast controls via OSD. Geometric Distortion Screen not centered correctly Reset the monitor to Factory Settings. Horizontal/Vertical Lines Screen has one or more lines Adjust Phase an...

Back to Contents Page Appendix Dell™ S2340T Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell WARNING: Safety Instructions For displays with glossy bezels the user should consider the placement of the display as the bezel may cause distu...

Back to Contents Page Setting Up Your Monitor Dell™ S2340T Monitor If you have a non Dell™ desktop, portable computer, or graphics card In Windows ® 7 or Windows ® 8: 1. Right-click on the desktop and click Personalization . 2. Click Change Display Settings . 3. Click Advanced Settings . 4. Identify...