Dakota Digital MCL-2011(-R) - Manual
Dakota Digital MCL-2011(-R) – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Description
- Page 4 – SPEEDOMETER SETUP; Diagnostics mode for checking/clearing trouble codes; SPEED CALIBRATION; Adjust speedometer calibration
- Page 5 – Display update setup; Bar graph color selection
- Page 6 – Gear Indicator setup; releasing the switch to store the gear position quicker.; Gauge indicator lights setup
- Page 8 – range
- Page 9 – Troubleshooting guide; Problem; SERVICE AND REPAIR
MAN# 650369
MODEL MCL-2011(-R)
TANK MOUNT SPEEDOMETER/TACHOMETER FOR 5” CAN BUS APPLICATIONS
Mounting:
The MCL-2011(-R) is designed to fit in the “Fat Bob” style five-inch diameter dash-mount gauge openings.
The MCL-2011(-R) gauges will work on
2011 - up Softail models with 5”
gauges and 2012 - up Dyna models
with 5” gauges. It is a direct plug in on
these models and requires no
additional wiring. Auxiliary temp or psi
sensors can be wired to the gauge.
Wiring Diagram
IMPORTANT NOTE!
This gauge has an odometer preset option that is only available for the first
100 miles (160km) of operation. See “preset odometer” for instructions.
Factory Dash Panel
Factory Gasket
Dakota Digital Gauge
MCL-2011 (-R)
#8 Lock Washer
8-32 x ½” Screw
L-Bracket (supplied)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
MAN# 650369 STATUS AND WARNING INDICATORS The high beam, turn signals, low oil, and neutral indicators are powered by the gauge and are activated by the stock wiring harness. Several indicators are supplied on the stock wiring harness. Some of these may not be active on your motorcycle. These includ...
MAN# 650369 SPEEDOMETER SETUP Press and hold the switch while turning the key on and starting the engine. Once the engine is running, release the switch. Press and release the switch to change the menu selection. dIAG dIAG dIAG dIAG Diagnostics mode for checking/clearing trouble codes • Press and re...
MAN# 650369 TACHOMETER SETUP The digital tachometer update rate can be adjusted between slow, mid, and fast. The rpm warning/shift point can be adjusted from 2000 – 7500 RPM. The bar graph color can also be changed from green with a red warning to red with a green warning. v vv vPdAtE PdAtE PdAtE Pd...
