Dakota Digital MCL-2004(-R) - Manual
Dakota Digital MCL-2004(-R) – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – GROUND; Ground is supplied by the stock harness.; Description
- Page 5 – SPEEDOMETER SETUP; Diagnostics mode for checking/clearing trouble codes; SPEED CALIBRATION; Adjust speedometer calibration
- Page 6 – Display update setup; Bar graph color selection
- Page 7 – Gear Indicator setup; releasing the switch to store the gear position quicker.; Low fuel light setup; CLOCK SETUP; Info menu
- Page 9 – range; Stock harness color
- Page 10 – Troubleshooting guide; Problem; SERVICE AND REPAIR
MAN# 650304:F
MODEL MCL-2004(-R)
TANK MOUNT SPEEDOMETER/TACHOMETER
Mounting:
The MCL-2004(-R) is designed to fit in the “Fat Bob” style five inch diameter dash mount gauge openings.
For all models except Deuce
NOTE: The supplied ABS mounting ring is not used for these applications and can be discarded
The MCL-2004(-R) gauges will work on
2004-2011 models except 2011 Softail.
It is a direct plug in on these models
and requires no additional wiring.
Auxiliary indicators can be wired to the
gauge.
Wiring Diagram
IMPORTANT NOTE!
This gauge has an odometer preset option that is only available for the first
100 miles (160km) of operation. See “preset odometer” for instructions.
Factory Dash Panel
Factory Gasket
Dakota Digital Gauge
MCL-2004 (-R)
#8 Lock Washer
8-32 x ½” Screw
L-Bracket (supplied)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
MAN# 650304:F Wiring The gauge is a direct plug in on 2004 and newer bikes. The only wiring, which is optional, is for the indicator lights and auxiliary pressure/temp gauges if you choose. POWER Constant battery power and key switched power are supplied by the stock harness. GROUND Ground is suppli...
MAN# 650304:F SPEEDOMETER SETUP Press and hold the switch while turning the key on and starting the engine. Once the engine is running, release the switch. Press and release the switch to change the menu selection. dIAG dIAG dIAG dIAG Diagnostics mode for checking/clearing trouble codes • Press and ...
MAN# 650304:F TACHOMETER SETUP The digital tachometer update rate can be adjusted between slow, mid, and fast. The rpm warning/shift point can be adjusted from 2000 – 7500 RPM. The bar graph color can also be changed from green with a red warning to red with a green warning. v vv vPdAtE PdAtE PdAtE ...
