Dakota Digital LAT-NR370 - Manual
Dakota Digital LAT-NR370 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
INSTALLATION INSTRUCTIONS
LAT-NR370
LED Tail Lights for 1964-1966 rectangular Ford Pickup, 1967-1972 Ford Pickup, 1966-1977 Ford Bronco,
1965-1966 rectangular Ford Econoline, 1967-1974 Ford Econoline,
1960-1966 Chevrolet Stepside Pickup, 1971-1972 Chevelle
MAN#650215 rev. B
Kit Includes:
Installation:
1. Remove the screws and the tail light lens.
2. Remove the tail light bulb.
3. Now is a good time to clean or replace the lens and housing if necessary.
4. The new LED assembly will mount into the original light bulb socket. Push it into the socket
and turn it clockwise to lock it in.
5. Repeat for the other tail light.
6. Test the tail lights, brake lights, and turn signals. If the turn signals do not flash, you will need
to upgrade your flasher. If you are replacing only the rear turn signals you should be able to
use a heavy duty electronic flasher from your local parts store. If you are replacing both front
and rear or do not have front bulbs you will need a no-load flasher, Dakota Digital part number
LAT-NLF.
MAN#650215:B
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
