Dakota Digital LAT-NR161 - Manual
Dakota Digital LAT-NR161 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
INSTALLATION INSTRUCTIONS
LAT-NR161
LED Tail Lights for ’60-‘65 Impala/Caprice, ’67 Impala,
‘75-‘76 Caprice, and ’71-’73 Mustang
MAN#650159b
Kit Includes:
Installation:
1. Remove the original bulb connector from the back side of the housing.
2. Remove the light bulb.
3. Remove the tail light lens.
•
On
the
60-65 Impala, the screws are directly in the lens.
•
On
the
67 Impala, the nuts securing the tail light assembly must be removed first from
inside the trunk. Once the assembly is removed, the screws on the back of the housing
can be taken out.
•
On
the
75-76 Caprice, the nuts securing the tail light assembly must be removed first from
inside the trunk. Once the assembly is removed, the screws on the top and bottom sides of
the housing are removed and the metal trim taken off. Last the screws holding the lens are
removed so the lens can come off.
•
On
the
71-73 Mustang, the lens is snapped into place with tabs around the outside edge.
Carefully pry the lens off using a flat blade screwdriver.
MAN#650159b
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
