Page 2 - CAUTION; RISK OF ELECTRIC SHOCK; WARNING
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intend-ed to alert ...
Page 3 - SAFETY PRECAUTIONS
SAFETY PRECAUTIONS LOCATION For safe operation and satisfactory performance of your unit, keep the following in mind when selecting a place for its instal-lation :• Never leave the TV/VCR in areas exposed to temperature extremes or strong direct sunlight. Leaving it in closed car, indirect sunlight,...
Page 4 - S A F E T Y; IMPORTANT SAFEGUARDS; Read all of these instructions.
S A F E T Y IMPORTANT SAFEGUARDS PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR TELEVISION EQUIPMENTAND RETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONSMARKED ON THE TV RECEIVER. 1 Read all of these instructions. 2 Save these instructions for later use. 3 Unplug this television e...
Page 6 - C O N T E N T S
1 Table of Contents Table of ContentsPreface : Your New TV/VCR 2 Features 2 Unpacking Your TV/VCR 3 Chapter 1 : Overview of Your Equipment 4 Your TV/VCR’s Front Panel 4 Your TV/VCR’s Back Panel 5 Your Remote Controller 6 Chapter 2 : Connecting an Antenna or Cable to Your TV/VCR 9 Connecting an Anten...
Page 7 - P R E F A C E; Features; Your TV/VCR has a advanced tuner that can receive up to 181 channels.
2 Preface : Your New TV/VCR P R E F A C E Your New TV/VCR Congratulations on your purchase of a new Daewoo TV/VCR. We hope you find that yournew TV/VCR provides you with years of reliable performance. Your new TV/VCR is designed and engineered to provide you with the latest in features foryour conve...
Page 8 - You can set your TV/VCR to turn on at a certain time.; • Parental Control; Parental control is on the 31 page.; Unpacking Your TV/VCR; A remote control
3 Preface : Your New TV/VCR • Video Index Search System (VISS) This feature allows you to find index marks on your tape quickly. Your TV/VCR placesindex marks at the beginning of each new recording. • One Touch Recording (OTR) You can quickly begin recording and set the length of time to record usin...
Page 9 - C H A P T E R; Overview of Your Equipment; Use this jack to receive a video signal from another A/V component.
4 Chapter 1 : Overview of Your Equipment C H A P T E R 1 Overview of Your Equipment Your TV/VCR’s comes with a remote control. The section below summarizes the buttons,controls, and terminals that will use with your TV/VCR’s. Your TV/VCR's Front Panel Below you will find short description of the but...
Page 10 - 1 PLAY button; Press this button to begin normal palyback of the tape.; 4 POWER button; Press this button to turn your TV/VCR on or off.; Your TV/VCR’s Back Panel; Antenna terminal; Notes
5 Chapter 1 : Overview of Your Equipment 11 PLAY button Press this button to begin normal palyback of the tape. 12 FF button (Fast Forward) Press this button to fast forward the tape. 13 STOP/EJECT button Press this button when the tape is moving to stop the tape. Press this button when the tapeis s...
Page 11 - Your Remote Controller
Your Remote Controller 1. POWER Press this button to turn your TV/VCR on or off. 2. RECALL Press this button to display the current time, thecounter, channel number and other status items. 3. TV/LINE Press this button to select between viewing thesignal coming from the antenna terminal (TV) orthe si...
Page 13 - Installing Your Remote Control Batteries; Open the battery compartment on the back of the remote control.
8 Chapter 1 : Overview of Your Equipment Installing Your Remote Control Batteries 1. Open the battery compartment on the back of the remote control. 2. Install two AAA-size batteries (not included) as shown. Make sure the “+” and “-” terminalsare oriented correctly. 3. Replace the cover. Notes Do no...
Page 14 - Connecting an Antenna or Cable to Your TV/VCR; Connecting an Antenna
C H A P T E R 2 9 Chapter 2 : Connecting an Antenna or Cable to Your TV/VCR Connecting an Antenna or Cable to Your TV/VCR Your TV/VCR will provide you with the best performance if you connect it to an externalantenna or cable system. Follow the directions below make this connection. Please note that...
Page 15 - Antennas with two sets of leads
10 Chapter 2 : Connecting an Antenna or Cable to Your TV/VCR Antennas with two sets of leads You might have two sets of leads from your antenna system, especially if you have one anten-na for VHF signals and one antenna for UHF signals. If your antenna system has both a coaxial lead and twin 300-ohm...
Page 16 - Connecting a Cable System; If your cable system does not require the use of a
11 Chapter 2 : Connecting an Antenna or Cable to Your TV/VCR Connecting a Cable System If your cable set-up is not described below, please contact your cable company for more infor-mation. If your cable system does not require the use of a cable box, simply press or screw the incoming cableonto the ...
Page 18 - Operating Your TV; Turning Your TV/VCR On
13 Chapter 3 : Operating Your TV C H A P T E R 3 Operating Your TV Once you have connected your TV/VCR to an antenna or cable system, plugged the TV in,and put batteries in the remote, you are ready to use the TV. The first thing you should do isprogram your TV/VCR so it memorizes all of available c...
Page 19 - Changing Channels
14 Chapter 3 : Operating Your TV Changing Channels You can change channels in three ways: 1. The x x CH y y buttons will take you through all memorized channels, one by one. The x x CH y y buttons will not access chan- nels that have not been programmed into the TV's memory. Formore information abou...
Page 20 - Displaying the TV/VCR’s Status during TV Operation
15 Chapter 3 : Operating Your TV Changing the TV/VCR's Channel Memory Your TV/VCR's memory determines the channels that are available using the x x CH y y but- tons. You can add channels to this memory or remove them from memory. If a channel isremoved from memory, you can tune to it with the number...
Page 21 - Adjusting Video Settings
16 Chapter 3 : Operating Your TV Adjusting Video Settings You may wish to adjust the video settings (e. g. contrast or color) to obtain the most pleasingpicture. To do so, follow these directions: 1. With the TV/VCR on, press the MENU button, then “Video” menu will appear. 2. The “Settings” item wil...
Page 22 - Returning to the factory settings
17 Chapter 3 : Operating Your TV Returning to the factory settings If you would like to return to the original video settings, as they were calibrated at the factory,follow these steps : 1. With the TV/VCR on, press the MENU button, then “Video” menu will appear. 2. Press the C VOL B buttons to set ...
Page 23 - Operating Your VCR; Video Cassette Tapes; Tape length/tape speed
18 Chapter 4 : Operating Your VCR C H A P T E R 4 Operating Your VCR Your TV/VCR has built-in VCR playback and recording capabilities, offering the ultimate inVCR convenience. This chapter explains the basic of using the VCR features of your unit. Video Cassette Tapes Your VCR uses VHS tapes. Only u...
Page 24 - Playing a Tape; Searching for a scene
19 Chapter 4 : Operating Your VCR Playing a Tape 1. To begin playing a tape, place it in the TV/VCR’s cassette compartment. If the erasure pre-vention tab has been removed, the tape will begin playing automatically. If the erasure pre-vention tab is intact, press the PLAY button on the front panel o...
Page 25 - Tracking; Begin playing back a tape.; Basic Recording; Tune to the channel you want to record.
20 Chapter 4 : Operating Your VCR Tracking “Tracking” is a term that describes how the TV/VCR “locks on” to the signal recorded on thetape. If the TV/VCR is not tracking correctly, the picture during playback will be jumpy anddistorted. Your TV/VCR is equipped with a sophisticated automatic tracking...
Page 26 - You can stop recording at any time by pressing STOP button.
21 Chapter 4 : Operating Your VCR You cannot change channels while you are recording. To change channels, pressPAUSE/STILL or STOP/EJECT to interrupt your recording. If the tape reaches its end while recording, it will quit recording and eject the tape. One Touch Recording (OTR) One Touch Recording ...
Page 27 - Displaying the TV/VCR’s Status during VCR Operation; Press the button a third time to return to normal viewing.
22 Chapter 4 : Operating Your VCR Displaying the TV/VCR’s Status during VCR Operation If you have a tape in the TV/VCR’s cassette compartment, you can display the followinginformation. 1. Press the RECALL button. The current time, the current channel, the tape statue (STOP,PLAY, REC, etc.), the tape...
Page 28 - Press the MENU button until “Tape” menu will be displayed.
23 Chapter 4 : Operating Your VCR Using the Counter (Zero Stop) The VCR counter can be used to keep track of your position on the tape. You can also use it toquickly return to a particular point on the tape. The counter cannot be displayed unless there isa cassette tape in the TV/VCR. 1. To display ...
Page 29 - Using Timer Functions; Setting the Clock Automatically
24 Chapter 5 : Using Timer Functions C H A P T E R 5 Using Timer Functions Your TV/VCR has a built in-clock, and you can set the TV to turn on and off at times that youselect. You can also set your TV to turn off after counting down a certain amount of time. Setting the Clock Automatically Your TV/V...
Page 30 - Setting the Clock Manually
25 Chapter 5 : Using Timer Functions Setting the Clock Manually If you are unable or not interested in using the Auto Clock feature, you can set yourTV/VCR’s clock manually. 1. With the TV turned on, press the MENU button until “Time” menu will be displayed. 2. The “Set Clock” item will be selected....
Page 31 - Setting the On Time
26 Chapter 5 : Using Timer Functions Setting the On Time If you enter a time in the “On Time” setting, your TV/VCR will automatically turn on at thattime. Follow these instruction to set the “On Time” 1. With the TV turned on, press the MENU button until “Time” menu is displayed. 2. Use the x CH y b...
Page 32 - Canceling the On Time or Off Time
27 Chapter 5 : Using Timer Functions 4. Press the C VOL B buttons to select the time and minute, press the x CH y buttons to time setting.If you hold down either x CH or CH y button, the corresponding numbers will change more quickly. 5. When the clock is set correctly, press the C VOL B buttons to ...
Page 33 - Setting the Sleep Timer
28 Chapter 5 : Using Timer Functions Setting the Sleep Timer The sleep timer allows you to set an amount of time from 15 minutes to 2 hours.TV/VCR count down the amount of time you set, then turn itself off.To set the sleep timer: 1. With the TV turned on, press the MENU button until “Time” menu wil...
Page 34 - Additional TV Features; Changing the Language of the On-Screen Menus; The “Language” item will be selected. Press the VOL; Captioning; To set your TV/VCR to display captions or text.
29 Chapter 6 : Additional TV Features C H A P T E R 6 Additional TV Features This section contains descriptions of the more advanced features of your TV. Changing the Language of the On-Screen Menus You can choose to display the on-screen menus in English, French, Spanish.To change the on-screen lan...
Page 35 - CC on Mute
30 Chapter 6 : Additional TV Features CC on Mute With this function, user can select the caption display instead of sound mute when using theMute button by neccessity. This function is only effective when Closed Caption is set to Off. 1. With the TV turned on, press the MENU button until “Special” m...
Page 36 - Parental Control Settings
31 Chapter 6 : Additional TV Features Parental Control Settings This item help parents to set the standard for the programs which their children are going to watch. 1. With the TV/VCR turned on, press the MENU button until “Special” menu will be displayed. 2. Use the x CH y buttons to select “Parent...
Page 37 - Description of Parental Control Settings
32 Chapter 6 : Additional TV Features Description of Parental Control Settings 1. The Movie Ratings set the standard for movie, video, and other media excluding TV programs. Use the x CH y buttons to select, C VOL B buttons to adjust. 2. The TV Guidelines set the standard for TV programs excluding s...
Page 38 - Mini Glossary
33 Chapter 6 : Additional TV Features Mini Glossary MOVIE RATING SYSTEM X NC-17 R PG-13 PG G NR Hard Core Films Restrictd viewing Restrictd viewing Parental Guidance Suggested Parental Guidance Suggested General Audience Not Rated Not for children under age 17 under any circumstance. Strong sexual c...
Page 39 - Additional VCR Features; Programming to Record at a Later Time; Getting ready; Before programming to record, keep the following things in mind :
34 Chapter 7 : Additional VCR Features C H A P T E R 7 Additional VCR Features Programming to Record at a Later Time One of the most convenient features of your new TV/VCR is the ability to record programswhen you are not home. Your TV/VCR can be set to record up to six different programs atany time...
Page 40 - Setting the Program Recording
35 Chapter 7 : Additional VCR Features Setting the Program Recording Here’s an example of how to record a program broadcast on channel 26 from 8:00 PM to 9:00PM Friday, 6th of February 1999, in EP mode. 1. With the TV/VCR turned on, press the MENU button until “Program” menu will be dis-played. 2. P...
Page 42 - Canceling the Program Record Settings; Using the
37 Chapter 7 : Additional VCR Features Canceling the Program Record Settings 1. With the TV/VCR turn on, press the MENU button until “Program” menu will be dis-played. 2. Using the x CH y buttons select the Program setting which you want to stop recording and press the CANCEL button. 3. Press the ME...
Page 43 - Displaying the Tape Counter; Time counter
38 Chapter 7 : Additional VCR Features Displaying the Tape Counter Press the RECALL button to display the tape counter. The tape counter shows the tape traveltime in hours, minutes and seconds during recording or playback. Each time you press theRECALL button, the time counter and the remaining tape...
Page 44 - Auto Repeat PlayBack
39 Chapter 7 : Additional VCR Features Auto Repeat PlayBack You can set your TV/VCR to play a tape continuously. When you turn this feature on and startplaying a tape, it will play to the end of the tape, then rewind to the beginning and start play-ing again. This will continue until you turn Auto R...
Page 45 - To search for an index mark:
40 Chapter 7 : Additional VCR Features Index Search (VISS) Your TV/VCR is equipped with the VHS Index Search System, or VISS. The VISS allows“index marks” to be placed on a video tape. These marks are similar to bookmarks - you canuse the search system to quickly find these marks, and thereby find a...
Page 46 - Duplicating a Video Tape; Press TV/LINE button on the remote control to set the TV/VCR to “LINE”.
Duplicating a Video Tape Because your TV/VCR has audio and video inputs, it is easy to make a copy of a tape, if youhave another VCR or Video Camera. Follow these instructions : 1. Connect a audio cable from the AUDIO OUT jack on the VCR to the AUDIO jack on thefront of your TV/VCR. 2. Connect a vid...
Page 47 - Troubleshooting; is adjusted correctly.
42 C H A P T E R 8 Troubleshooting Your Daewoo television is designed to give you trouble-free performance for many years.If you have a problem with your TV, try the solutions listed below. If the suggestions listed below do not solve your problem, contact your Daewoo dealer oran authorized Daewoo s...
Page 48 - MAINTENANCE AND SPECIFICATIONS
Servicing Should your TV/VCR stop working, do not try to repair it yourself. There are no user-service-able parts inside the unit. Turn the TV/VCR off, unplug the power cord, and take the unit to anauthorized Daewoo repair center. Cabinet Cleaning To clean your TV/VCR, wipe it with a soft cloth that...
Page 49 - WA R R A N T Y; Model
Warranty 44 WA R R A N T Y Daewoo Electronics Corporation of America warrants each new electronic productmanufactured by it to be free from defective material and workmanship and agrees toremedy any such defect or to furnish a new part (at the Company’s option) inexchange for any part of any unit of...
Page 50 - This instrument is listed by Underwriter; Daewoo Electronics Corporation of America
This instrument is listed by Underwriter ’ s Laboratories, Inc. It is designed andmanufactured to meet rigid U.L. safety standardsagainst X-radiation, fire, casualty and electricalhazards. Daewoo Electronics Corporation of America 120 Chubb AvenueLyndhurst, NJ 07071 For more information about this o...
