Daewoo DV6T811N - Manual

Pr oduct Information 9 Contents Important Safeguards .................................................................................................................. 1 Advantages of This Product Are .... ........................................................................................... 5 ...

Pr oduct Information 11 Identification of Controls Main body (front panel) ! % & * ) 1 2 3 4567 8 ^ @ # $ ( ! POWER (STANDBY/ON) button Use to power the device on/off if AC power supplyis connected. @ Place to insert videotape # COPY button Use to copy contents of disc into a videotape. $ Disc t...

12 Operation Display Window ! @ # % ^ * ( 2 4 6 $ & ) 1 3 5 7 ! VCR Operation @ REC and TIMER REC display : Recording , : TIMER Recording , : To be Timer-recorded, : To be Timer-recorded state ERROR (No Tape or Tape without tab) # Copying Use to copy contents of disc into videotape. $ Hi-Fi Vide...

14 Remote Control VCR DVD REPEAT OPEN/CLOSE DISPLAY TITLE/PBC MENU CH CH OUTPUT PREV. REC PROGRAM CLK/CNT SPEED/ANGLE TRACKING TV/VCR MARK SEARCH 100/SYSTEM PLAY/PAUSE NEXT ZOOM AUDIO SUBTITLE RETURN CLEAR/3D SETUP ENTER /S-VHS 6 @# ! $ % ^ &*( ) 12 3 4 5 789 0 “ ‘+= QqWwE e R ! [DVD] MENU butto...

Pr oduct Information 15 Instructions in Using REMOTE Accessories VCR DVD REPEA T OPEN/CLOSE DISPLA Y TITLE/PBC MENU CH CH OUTPUT PREV . REC PROGRAM CLK/CNT SPEED/ANGLE TRACKING TV/VCR MARK SEARCH 100/SYSTEM PLAY/P AUSE NEXT ZOOM AUDIO SUBTITLE RETURN CLEAR/3D SETUP ENTER /S-VHS REMOTE 2 Batteries RF...

16 Connecting with TV How to Connect with RF cable INPUT 1 ANT IN INPUT 2 REAR PANEL OF DVD-VIDEO OUTSIDE ANTENNA OR WALL ANTENNA OUTLET REAR PANEL OF TV RF CABLE ¡ Remove circular cable (RF cable) (surplus cable) plugged in “ANT.IN” Jack in rear panel of TV. Connect thecable to “ ANT.IN ” jack in r...

Installation 17 How to Connect with Audio/Video jack INPUT 1 ANT IN INPUT 2 REAR PANEL OF DVD-VIDEO OUTSIDE ANTENNA OR WALL ANTENNA OUTLET REAR PANEL OF TV RF CABLE AUDIO/VIDEO CABLE £ (If there is AUDIO/VIDEO INPUT jack in TV) Connect VIDEO OUT jack in DVD-Video to VIDEO IN jack in TV, and AUDIO OU...

18 Connecting with Cable Box How to connect INPUT 1 IN OUT ANT IN INPUT 2 REAR PANEL OF DVD-VIDEO CABLE ANTENNA CONVERTER BOX REAR PANEL OF TV SPLITTER (NOT SUPPORTED) A/B Switch RF CABLE RF CABLE RF CABLE RF CABLE OUT OUT IN AUDIO/VIDEO CABLE If your cable system only requires you to use a converte...

Installation 19 How to watch general broadcasting with recording CATV ¡ Set Channel Select switch of Converter Box to CH 3 or 4 as same as video exclusive channel. Press [SET] button in [VCR] operation to set video exclusive channel in “CHANNEL SET” screen. ™ Press channel button of Converter Box to...

20 Connecting with Other VCR or Camcorder How to Connect with Jack in Rear Panel How to Connect with Jack in Front Panel INPUT 1 OUT VIDEO (L) AUDIO (R) ANT IN INPUT 2 REAR PANEL OF DVD-VIDEO FRONT PANEL OF DVD-VIDEO REAR PANEL OF PLAYBACK VCR(CAMCORDER) REAR PANEL OF TV RF CABLE AUDIO/VIDEO CABLE I...

Installation 21 How to Copy(Edit) Tape with Other VCR or Camcorder ¡ Connect AUDIO/VIDEO OUT jack in Camcorder(or playback video) to AUDIO/VIDEO IN jack in rear panel (or front panel) of DVD-Video with connecting cable. ™ Connect “ ANT. IN ” jack in TV to “ RF.OUT ” jack in DVD-Video with RF cable. ...

22 Connecting with Audio How to Connect with Stereo Unit such as Audio (L) AUDIO (R) REAR PANEL OF DVD-VIDEO REAR PANEL OF STEREO UNIT AUDIO CABLE ¡ Connect Audio jack. Connect AUDIO OUT in rear panel of DVD-Video to IN jack of stereo sound unit. ™ For Input Select in stereo unit, Select “External I...

Move: Select : Exit:Setup/Return Installation 23 Connecting TV with S-Video/Component Jack, Amp with Digital Audio Out Jack How to Connect (L) AUDIO IN (R) REAR PANEL OF DVD-VIDEO AMPLIFIER OF DOLBY DIGITAL REAR PANEL OF TV COMPONENT IN CONNECTING CABLE (NOT SUPPORTED) ¡ Select either S-VIDEO IN or ...

24 Clock Set Press [SETUP/ENTER] button. Press [>] button to select CLOCK SET. Select Time and Date Set with [ ] button inCLOCK SET screen. ■ Set TV to CH 4 (or 3). ■ Press [VCR] button on remote control to change into VCR Mode and follow theprocedure below. Set the current date and time with [ ,...

Basic Operation 25 Output Select Press [DVD] button. If DVD mode is correctly selected, DVD on the operation display window is lighted. Then, REMOTE button works as DVD function. Press the [DVD] button, then the mode of DVD-Video Player becomes to the OPERATION mode. To Select VCR Press [VCR] button...

26 DVD Playback Press [ ] button to power on. Press [DVD] button of REMOTE to change into DVD mode. Press [OPEN/CLOSE] button to open the disc tray. Place a disc firmly on the disc tray, making its label look upward. Insert the disc and press [OPEN/CLOSE] button to close the tray. The disc tray is c...

Basic Operation 27 VCR Playback Press [ ] button to power on. Press [VCR] button of remote control to change into VCR mode. Insert the desiredtape. If you want to playback it, press [PLAY/PAUSE] button. When the operational status is flickering or poor, adjust it with [TRACKING +/-]button. 1 2 3 To ...

28 To Adjust Display Various Playback Methods ■ If you want fast forward playback, press [ ] button in Playback mode. You can watch fast playing screen. ■ If you want fast reverse playback, press [ ] button in Playback mode. You can watch fast rewinding screen. ■ If you want Still picture, press [PL...

Basic Operation 29 Recording Press [ ] button to power on. • Press [VCR] button of remote control to change into VCR mode. • Power on TV and select Ch 3, or press [INPUT] button of TV set to select External Input mode. Insert a recordable tape. Insert a tape with recording tab. With [CHANNEL], [NUMB...

This product incorporates copyright protection technology that is protected by method claims of certain U.Spatents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporatio...

32 Memorizing TV Channels Press [SETUP/ENTER] button. Press [ ] button to move into CHANNEL SET, and then select CHANNEL SET with [ ] button. ■ Set TV to Ch 3. ■ Prior to the setting, press [VCR] button of your REMOTE to change into VCR mode. Select “AUTO CHANNEL SEARCH”. Press [ ] button in CHANNEL...

VCR Operation 33 To Memorize Channels Manually When the desired broadcasting finished or you want to add unmemorized channels owing to poor signals tothe memory, follow the procedures below. After pressing [SETUP/ENTER] button, select “CHANNEL SET”. Select “Add/Remove Channels”. Move into “Add/Remov...

34 To Delete Channels Manually After memorizing automatically channels, when the same broadcasting is memorized in more than twochannels, or you want to delete badly displayed channels, follow the procedures below. Press [SETUP/ENTER] button and select “CHANNEL SET”. Select “Add/Remove Channels”. Mo...

VCR Operation 35 To Set Cable Box To Set Output Channel Press [SETUP/ENTER] button and select“CHANNEL SET” .Select “Output channel selection”. By pressing [ ] button, set the exclusive channel for video on the desired one of 3CH or 4CH. Press [SETUP/ENTER] button and select “CHANNEL SET”. Select “Ca...

Timer Recordings TIMER RECORDINGS Press [SETUP/ENTER] button and select“TIMER RECORDINGS”. Move into “TIMER RECORDINGS” with [ ] and then, select the desired one with [ ] button. Select “Make a New Program”. Press [ ] button to select “Make a new Program”. 1 2 Select “TIMER REC method”. Move into de...

VCR Operation 37 Set proper “RECORDING SPEED”. Select one of SP/EP with [ ] and [ ]buttons. For more information on recording speed, see“Types of Recording Speed” in the page 39. 6 Press [RETURN] button to complete thesetting. “Program # has been saved. For programrecording, insert a cassette....” m...

38 Various TIMER RECORDINGS ■ One Time TIMER RECORDINGS It is available of TIMER RECORDINGS at the desired specified time. ■ Daily TIMER RECORDINGS Once you set TIMER RECORDINGS of the desired program telecasted at thesame time day after day, it is available of daily recordings. It is available ofTI...

VCR Operation 39 Using video cassettes Before you play or record on a video cassette tape, be certain to read this information on the proper care and use ofvideo cassettes. Only use video cassettes that bear the VHS mark: . There are four types of video cassettes: T-60, T-90, T-120, and T-160. The a...

40 Watching and Recording Cable TV To Watch and Record Promptly Cable TV Power on converter and then, set a channel to watch or to record. Power on DVD-video and then, set the channel of DVD-video to the converter-connected channel (one ofCH03/04/EXTERNAL INPUT). Power on TV and then, set the video-...

VCR Operation 41 Using advanced features Play the tape automatically This feature allows the VCR to automatically start playing when you insert a tape with the safety tab removed. Press [SETUP/ENTER] button and select“FUNCTIONS”. Move into “FUNCTIONS” with [ ] and then, select the desired one with [...

42 Switch the VCR to TV or VCR mode automatically This feature controls whether the TV/VCR switch changes automatically to the VCR mode when the VCR is turnedon. Press [SETUP/ENTER] button and select“FUNCTIONS”. Move into “FUNCTIONS” with [ ] and then, select the desired one with [ ] button. Press [...

VCR Operation 43 Indexing VISS Signals VISS signal will be indexed automatically while starting any TIMERRECORDINGS including programmed and/or preselected recording. ** The program for VISS function should be over 5-minutes length** Note that if the tape to be recorded is fully rewinded, it must be...

44 Counter 0 Stop The function is to search any scene that you wish to watch again more easily by indexing while playing orrecording it. Please press [DISPLAY] button twice. The counter appears in screen and the operationdisplay window. 1 In the moment, please press [CLEAR] buttonto make the counter...

VCR Operation 45 Displaying Clock/Counter Press [CLK/CNT] button. Each time you press this button, “CLOCK” and “COUNTER” are displayed inserial order. 1 “CLOCK” is displayed. Current time is displayed. 2 Real-time “COUNTER” is displayed. Current position of the video is displayed as hour, minute and...

46 Changing the on-screen menu language Please press [SETUP/ENTER] button.Press [ ] button until is located in “LANGUAGE SELECT”, then select“LANGUAGE SELECT” by pressing [ ] button. 1 Select the language among English, Spanishor French. 2 You may select the language in which you would like the VCR’...

VCR Operation 47 Hi-Fi Stereo Playback Playing a tape in Hi-Fi high-quality • “Hi-Fi” signal lights up in the top of a screen.• Pressing [AUDIO] button changes menus one by one. If there are some noises made in recording, please “Linear” to reduce them. Forced Mono • In some cases, while receiving a...

48 Skipping from a current scene to a desired scene To skip chapter in a DVD To move to next chapter, press [NEXT ] button. The current chapter moves to the next chapter. 1 Press [ PREV] button. It moves to the first part of current chapter.If pressing it again, it moves to the prior chapter. 2 To p...

DVD Operation 49 To play it slow Press [ ] button to play it slow in PAUSE. Every time you press the button, slow play speed changes like the below orders. 1/2 1/4 1/8 1/2 .... Also you can return to normal speed by pressing [ ] button. *For the case of SVCD or VCD, Slow playback is available. 1 Pre...

DVD Operation 55 confirming the current disc mode Confirming the current PLAY mode on screen While in playing, press [DISPLAY] button. It shows a disc type, the current title, chapternumber, time elapsed and REPEAT mode. 1 ■ Before setting it, you should change into DVD mode by pressing [DVD] button...

56 Selecting an audio language Selecting an AUDIO language, SUBTITLE language and 3D AUDIO A user may select an audio language and subtitle language if a disc includes Multi-language. Keep pressing [AUDIO] button till a user’s preferredlanguage appears. If DVD disc includes audio information, every ...

DVD Operation 57 Selecting ZOOM and Multi Angle Using a zoom function A user can enlarge the current screen about 1.3, 1.5 or 2 times. Keep pressing [ZOOM] button till the preferredzoom appears. Every time a user presses [ZOOM] button, a zoommagnification changes 1.3 times (X1.3) 1.5 times (X1.5) 2 ...

58 Memorizing a scene To memorize a scene Once memorizing a scene, a user may watch it anytime. ■ Before setting it, you should change into DVD mode by pressing [DVD] button onremote control. ■ For VCD playback, set to “PBC OFF” mode by pressing the [PBC] button. While playing, press [MARK] button. ...

DVD Operation 59 Displaying menus in a disc To display menus in a disc If a disc includes menus, a user may use them. ■ Before setting it, you should change into DVD mode by pressing [DVD] button onremote control. DVD) Press [MENU] or [TITLE/PBC] button. It shows menus in the disc. Also they are dif...

Move: Select : Exit:Setup/Return 60 Basic SETUP mode ■ Before setting it, you should change into DVD mode by pressing [DVD] button onremote control. While STOP or RESUME STOP, press[SETUP/ENTER] button. • A screen to set various menus like the right figure appears. • By using [<] and [>] , a s...

Move: Select : Exit:Setup/Return Move: Select : Exit:Setup/Return Move: Select : Exit:Setup/Return Move: Select : Exit:Setup/Return Setup 61 LANGUAGE Setup ■ Before setting it, you should change into DVD mode by pressing [DVD] button onremote control. While STOP or RESUME STOP, press [SETUP/ENTER] b...

Move: Select : Exit:Setup/Return Move: Select : Exit:Setup/Return Move: Select : Exit:Setup/Return Move: Select : Exit:Setup/Return Move: Select : Exit:Setup/Return 62 VIDEO Setup ■ Before setting it, you should change into DVD mode by pressing [DVD] button onremote control. While STOP or RESUME STO...

Setup 63 AUDIO Setup Move: Select : Exit:Setup/Return Move: Select : Exit:Setup/Return ■ Before setting it, you should change status into DVD by pressing [DVD] button on theremote control. Select a digital output. Set output conditions to coaxial or opticalterminal. You can set following three(3) va...

Setup 65 Move: Select : Exit:Setup/Return Move: Select : Exit:Setup/Return Move: Select : Exit:Setup/Return Move: Select : Exit:Setup/Return Move: Select : Exit:Setup/Return Others Setup ■ Before setting it, you should change into DVD mode by pressing [DVD] button onremote control. Select OSD (On Sc...

66 Move: Select : Exit:Setup/Return Input Password Exit:Setup/Return Settling a user’s PARENTAL Entering a password. If selecting “PARENTAL” by moving [>], apassword display appears.Then entering a user’s password, a user canresettle a user’s PARENTAL. 1 Resettling a user’s PARENTAL. Set your des...

Setup The others 67 About DVD Playable Disc • DVD, Video CD(Version 1.1, 2.0), S-VCD and Audio CD Disc type Playable Restriction DVD Possible Region number 1 or Region number All Video CD Possible Version 1.0/1.1/2.0, SVCD/CVD CD Possible PCM or dts CD-G Possible Only Audio playback CD-ROM Possible ...

68 Terms related with DVD DVD A DVD (abbreviation of Digital Versatile Disc or Digital Video Disc) can include 135 minutes ofvideo information. And for audio, it can hold up to 8 kinds of languages and 32 kinds of subtitlelanguages. By using MPEG-2 video compression and digital 3D surround sound, DV...

The others 69 Handling Disc • To keep a disc clean condition, please do not touch a side containing play information.• Do not attach a bit of paper or sticky tape on it.• Do not expose a disc to a direct sunlight or electric heating systems.• After using it, please keep a disc in a case. Cleaning Di...

70 Basic information about VCR and Videotape What is dew condensation symptom? • If a VCR is moved from a cool place to a warm and damp place or a place facing a direct cool wind from air-conditioner...and others,temperature varies sharply, which makes dew on head drums of VCR. If dew condensation o...

The others 71 Noise • Noise means poor screen conditions of VCR such as interruption or trembles in the top of bottom of a screen. • If a noise occurs, please adjust a screen by operating “TRACKING” buttons . • Adjustment may not improve quality screen if the tape is originally recorded mixed with s...

78 DVD Audio output standards Specifications Power AC 120V, 60Hz Consumed electricity 24W (supplementary 2.5W) Weight 5.7kg Dimension (WxHxD) 430mmx91mmx355.5mm Operative temperature +5°C~35°C Installation condition Horizontal / Relative humidity under 80% Received channels VHF: 2-13 CH / UHF: 14-69...

The others 79 Region Code The product and all DVD disc have region codes. So if both codes are not coincided each other, it does not work.Legion codes are like the below. DVD-Video(USA)_DV6T811N-LT 02.4.16 2:39 PM ˘ ` 79

Warranty Daewoo Electronics Corporation of America warrants each new electronic product manufactured by it to be freefrom defective material and workmanship and agrees to remedy any such defect or to furnish a new part (at theCompany’s option) in exchange for any part of any unit of its manufacture ...