CyberPower RMCARD201 - Manual
CyberPower RMCARD201 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION GUIDE; Step 1. Hardware and Tool Installations; Adapter and plug into the wall socket.; Step 2. Setup the IP address for the SNMP Card.
- Page 3 – I. IP setup using “SNMP Card Configuration Tool” program:
- Page 4 – the
- Page 5 – program before you
- Page 6 – II. IP setup using Command Line command:; To verify the setting please try to ping the IP address you set:
- Page 7 – Overview; You may need to contact your network administrator.; Locate the subnet of CyberPower Network Management Card.; Select an IP Address for CyberPower Network Management Card
- Page 8 – Try another IP address until an available address is found.
Cyber
Power
Network Management System
1
Rev.1.2
www.cyberpowersystems.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Cyber Power Network Management System 2 INSTALLATION GUIDE Step 1. Hardware and Tool Installations 1. Connect the Ethernet cable to the LAN port of the CyberPower Network Management Card. 2. Connect the CyberPower Network Management Card to the UPS communication port (serial port). The included seri...
Cyber Power Network Management System 3 In this section, it will be introducing the “SNMP Card Configuration Tool” program. If a DHCP network service is not available or you want to assign a new IP Address to the SNMP card, please follow the steps listed below: I. IP setup using “SNMP Card Configura...
Cyber Power Network Management System 4 6. First, choose either IP or MAC address from device address option. 7. Then click on each checkbox to modify new IP, new subnet mask or new gateway address from modify option. Last, input the new address on the right for the chosen checkbox. 8. You need to i...
