CyberPower RMCARD201 - Manuals

CyberPower RMCARD201 – Manual in PDF format online.

Manuals:

Manual CyberPower RMCARD201

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - INSTALLATION GUIDE; Step 1. Hardware and Tool Installations; Adapter and plug into the wall socket.; Step 2. Setup the IP address for the SNMP Card.

Cyber Power Network Management System 2 INSTALLATION GUIDE Step 1. Hardware and Tool Installations 1. Connect the Ethernet cable to the LAN port of the CyberPower Network Management Card. 2. Connect the CyberPower Network Management Card to the UPS communication port (serial port). The included seri...

Page 3 - I. IP setup using “SNMP Card Configuration Tool” program:

Cyber Power Network Management System 3 In this section, it will be introducing the “SNMP Card Configuration Tool” program. If a DHCP network service is not available or you want to assign a new IP Address to the SNMP card, please follow the steps listed below: I. IP setup using “SNMP Card Configura...

Page 4 - the

Cyber Power Network Management System 4 6. First, choose either IP or MAC address from device address option. 7. Then click on each checkbox to modify new IP, new subnet mask or new gateway address from modify option. Last, input the new address on the right for the chosen checkbox. 8. You need to i...

CyberPower Manuals