CyberPower Network Management Card - Manual
CyberPower Network Management Card – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; Monitoring...................................................................; Appendix 1. IP Address Settings of CyberPower Network
- Page 3 – INTRODUCTION; Features
- Page 4 – Unpacking; CyberPower Network Management Card
- Page 5 – Description; indicates the status of connection between UPS and the Network
- Page 6 – INSTALLATION GUIDE; Step 1. Hardware Installation; is optional to use the serial cable included.; Method 1 : Use SNMP Card Configuration Tool Setting; Install the SNMP Card Configuration Tool from the included CD
- Page 7 – new addresses into the corresponding fields.
- Page 8 – Method 2 : Use DOS Mode Setting; has the MAC address; Ente; and press; Enter; Configuration to establish the IP address.
- Page 9 – CONFIGURATION GUIDE
- Page 14 – Retype the password to confirm the password was keyed properly.
- Page 15 – assign the system’s name, contact, and location of the system.
- Page 17 – Red
- Page 18 – Information; indicates an event that requires no action.; Warning; indicates an event that requires immediate attention.
- Page 20 – Overview; The computer will display network information as below:; Select an IP Address for CyberPower Network Management Card
User’s Manual
Network Management Card
Intelligent Network Management Card allows UPS to be
managed,monitored,and configured via SNMP Card
Configuration Tool
Version 1.3
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
TABLE OF CONTENTS INTRODUCTION…………………………………...………………… 1 INSTALLATION GUIDE…………………………………...………… 4 CONFIGURATION GUIDE…………………...………………...…… 7 Monitoring…………………………………………………………. 7 Current Status..………………………………………………… 7 UPS Information...………………..……………………………. 8 Control….…………………………………………………………. 9 UPS Contro...
Cyber Power Network Management System 1 INTRODUCTION Overview The CyberPower Network Management Card is an external card that allows remote monitoring and control of a UPS on a network. After installing the hardware and configuring an IP address, the user can access, monitor and control the UPS from...
Cyber Power Network Management System 2 Unpacking Inspect the Network Management Card upon receipt. The package should contain the following: z CyberPower Network Management Card z PowerPanel ® Shutdown Service Software and user manuals CD z AC adapter ( For select UPS models only )
