Crestron GLA-PWSI50 - Manual
Crestron GLA-PWSI50 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Industry Compliance; Reorient or relocate the receiving antenna.
- Page 3 – Application
- Page 4 – Physical Description; Setup; Important Notes; Read before installation.; Not suitable for Hazardous/Classified areas.; Supplied Hardware
- Page 5 – Preparation; Hardware Hookup; Turn off power at the circuit breaker(s) prior to
- Page 6 – Installation; Fuse Replacement; Problem Solving; Troubleshooting; Further Inquiries
- Page 7 – Return and Warranty Policies; Merchandise Returns / Repair Service
- Page 8 – This page is intentionally left blank.
GLA-PWSI50
Crestron Electronics, Inc.
Installation Guide – DOC. 6747A
15 Volvo Drive Rockleigh, NJ 07647
(2022674)
Functional Summary
The GLA-PWSI50 is a 50 Watt Cresnet
®
Power Supply
designed for use with a Crestron
®
Green Light™ system,
or anywhere a wall-mountable Cresnet power supply is
needed. It is compatible with any line voltage from 100 to
240 Volts, 50 or 60 Hz.
The GLA-PWSI50 mounts conveniently over the front of
an electrical box, with all connections made inside the
box via flying leads using terminal block connectors. An
adapter plate is included for installation over a 1 or
2-gang UK or Euro style electrical box. Without the
adapter plate, the GLA-PWSI50 may be mounted over a 4
inch square or 2-gang US electrical box.
•
50 Watt Cresnet power supply
•
Powers the IPAC and other Cresnet devices
•
Provides backup power for Crestron Green Light
cabinets
•
Compatible with 100 to 240 VAC mains
•
Mounts to a 1 or 2-gang UK (BS 4662) or Euro
(DIN 49073) electrical box
•
Also compatible with 4 inch square or 2-gang US
electrical boxes
GLA-PWS50 (shown with Adapter Plate) Physical View
Specifications
GLA-PWSI50 Specifications
SPECIFICATION DETAILS
Output Power
Output
Power
Ripple/Noise
50 Watts (2.1 Amps) @ 24 Volts
DC, regulated, limited power
source
<1%
Power Requirements
Input
0.6 Amps @ 100-240 Volts AC,
50/60 Hz
Enclosure
Metal construction, 1- or 2-gang
(BS4662 UK or DIN 49073)
backbox, includes adapter plate
Environmental
Temperature
Humidity
Heat
Dissipation
0° to 40°C (32° to 104°F)
10% to 90% RH
(non-condensing)
26 BTU/Hr
Dimensions
(without adapter plate)
Height
Width
Depth
10.16 cm (4.00 in)
14.09 cm (5.55 in)
5.76 cm (2.27 in)
Weight
0.54 kg (1.2 lbs)
Tel: 888.CRESTRON
02.09
Fax: 201.767.7576
Specifications subject to
www.crestron.com
change without notice.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
50 Watt Cresnet Power Supply Crestron GLA-PWSI50 Industry Compliance As of the date of manufacture, the GLA-PWSI50 has been tested and found to comply with specifications for CE marking. NOTE: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (...
Crestron GLA-PWSI50 50 Watt Cresnet Power Supply Application The following diagram shows a GLA-PWSI50 module in a typical application. GLA-PWSI50 in a Lighting Application Installation Guide – DOC. 6747A Wall Mount 50 Watt Cresnet Power Supply: GLA-PWSI50 • 3
50 Watt Cresnet Power Supply Crestron GLA-PWSI50 Physical Description This section provides information on the connections, controls and indicators available on the GLA-PWSI50. GLA-PWSI50 Overall Dimensions 0.31 cm (0.12 in) 5.45 cm (2.15 in) 12.77 cm) (5.03 in) 10.16 cm (4.00 in) 14.09 cm (5.55 in)...
