Corsair DHX-2 - Manual
Corsair DHX-2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Removing the Cooling Fins
- Page 4 – Remove the 3 Screws
- Page 5 – The Cooling Fin Removed
- Page 6 – Resources
P erf o rman ce Hard w ar e
User’s Guide
Version 1.0
February, 2010
R e m o v i n g D o m i n a t o r
D H X - 2 C o o l i n g F i n s
An illustrated step-by-step guide to removing the cooling fins
from Dominator and Dominator GT DDR3 memory modules.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Removing Dominator Cooling Fins 2 Removing the Cooling Fins The cooling fins are attached using 3 screws. You will need a 3/32” hex key or allen wrench to remov e these screws.
Removing Dominator Cooling Fins 3 Remove the 3 Screws Use the hex key to turn the screws counter clockwise. Once all 3 screws are remov ed, the cooling fin will come off.
Removing Dominator Cooling Fins 4 Once the cooling fins are remov ed, the modules are ready for the installation of upgraded cooling fins or custom cooling solutions. The grey material on the top of the heat sinks is thermal interface material or TIM. This is a thermally conductiv e material used to...
