Corsair DHX-2 - Manuals

Removing Dominator Cooling Fins 2 Removing the Cooling Fins The cooling fins are attached using 3 screws. You will need a 3/32” hex key or allen wrench to remov e these screws.

Removing Dominator Cooling Fins 3 Remove the 3 Screws Use the hex key to turn the screws counter clockwise. Once all 3 screws are remov ed, the cooling fin will come off.

Removing Dominator Cooling Fins 4 Once the cooling fins are remov ed, the modules are ready for the installation of upgraded cooling fins or custom cooling solutions. The grey material on the top of the heat sinks is thermal interface material or TIM. This is a thermally conductiv e material used to...