Cooper Lighting Indoor Lighting Accessories - Manual
Cooper Lighting Indoor Lighting Accessories – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
T-Bar Safety Clips
EQ-Clip-U
(U.L. Listed E61165)
(U.L. Listed 912Y)
U.L. approved safety clips used to secure recessed
troffers to T-bar. EQ clips used on fixture sides and
T3A End EQ Bracket Parts Bag
EQ end brackets for use on fixture ends.
(Includes (4) Screws and (4) Brackets
Use four per fixture
Suspension Sets
Stem Sets
SCF-XX-B
Fixed Stem Set
SCS-XX-B
Swivel Stem Set
(Deep canopy, 3/8" stem, 5/8"
outside diameter)
XX
= Length 6, 8, 12, 24, 36, 48, 60, 72
SCA-48-B
Adjustable Stem Set (1/4" IPS Stem, 1/2" O.D.)
Used with all surface fixtures as stem sets. SCS stems have 45° swivel, one direction. One set consists of
one stem assembly. Minimum of two sets required per fixture. NOTE: Coupler, 3/8" IPS Pipe Coupler to
join lengths. Coupler is standard baked white enamel or special order of black.
Cable Sets
CCA-XX-PFC-U
CCA=Adjustable Cable (XX=48" or 120")
CCA-XX-PFS-U
CCF=Fixed Cable (XX=12", 15", 18", 21", 24" or 27")
CCA-XX-NPF-U
PFC=Power Feed, coil power cord
CCF-XX-PFC
PFS=Power Feed, straight power cord
CCF-XX-PFS
NPF=Non Power Feed
CCF-XX-NPF
Plaster Frames
95-PF-14 (1x4)
95-PF-22 (2x2)
95-PF-24 (2x4)
95-PF-44 (4x4)
Side Filler Panel
SFP-4FT-B
Heavy gauge side filler panels for 20" x 48" fixture
for use in a 2' x 4' ceiling installation. (Baked white
finish/2 per set)
Spacer
A-1-B/Spacer-U
Spaces fixture 1 1/2" to 2 1/2" from ceiling
End Fillers
12-EFS-B (1x2, 1x4)
6" Heavy gauge end fillers use 2 per fixture. End
20-EFS-B (20x48, 20x24)
fillers lay on T-bars and are held in place by fixtures
24-EFS-B (2x2, 2x4)
but are not attached
End Support Brackets
ESS-B
Heavy gauge end support brackets. Four per
fixture are required when fixtures are supported
from ends. Must be used with fixture that has a
modified end plate (MEP) .
CR Wall Mounting Kit
CR-WALLKIT
Kit including clips to install the CR Surface Corridor
fixture for wall mount applications.
ACCESSORIES
470
C O O P E R L I G H T I N G
PARABOLIC, RECESSED AND SURFACE ACCESSORIES
(ORDER SEPARATELY)
SCF SCS SCA
CCA CCA CCA
PFC PFS NPF
Heavy Gauge Metal Construction. Used with
Flanged Recessed Fixtures. (Intended to serve as
a plaster stop only, not to fit into an opening).
Items listed are the major accessories available on Metalux Recessed (Parabolic and Recessed) and Surface Fixtures. Additional options and accessories are available.
Consult Pre-Sales Technical Support for additional information.
COOPER LIGHTING - METALUX
®
A C C E S S O R Y
D E S I G N A T I O N
D E S C R I P T I O N
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
