Citizen JR10-M01 - Manual

5 Cautions for Set-up ・ Prior to operation, read “For Safe Operation” carefully and observe the rules therein. ・ Use care when moving the printer. Never try carrying the printer alone. Dropping it could cause injury or damage to other property. ・ Do not use or store the printer near fire, excessive ...

6 Regulatory compliance statements American users FCC part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipm...

7 Declaration of Conformity European users Hereby, CITIZEN SYSTEMS JAPAN Co.,Ltd., declares that this digital color printer is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

8 Table of Contents Introduction ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 2 For Safe Operation ・・・・・・・・・・・・・・・・・・・・・・・・・・ 2 Cautions for Set-up ・・・・・・・・・・・・・・・・・・・・・・・・・・ 5 Regulatory compliance statements ・・・・・・・・・・・・・・・・・・・・ 6 Declaration of Conformity ・・・・・・・・・・・・・・・・・・・・・・・ 7 Table of Contents ・・・・・・・・・・・・...

12 Setting Up the Printer Paper, Ribbon Type L (5x3.5), 2L (5x7) PC (6x4), A5 (6x8) Paper Width: 127mm Width: 152mm Ribbon Width: 134mm Width: 159mm ・ Set the paper and ribbon without putting them directly on the work surface. Any dust or dirt couldget inside the printer and adversely affect the pri...

15 Setting Up the Printer 7. Set the ribbon into the printer. Unite and insert the position of the shape of a concave and convex form of an attachment and a holder. Turn the take-up side of the ribbon in the direction indicated by the arrow to take up slack. Ribbon winding direction 8. Close the fro...

18 Trouble-shooting Solving Media Errors 1. Release the Open Lever, and open the front cover. 2. Remove the ribbon. a. If the paper is jammed: 1. Pull out any paper remaining in the printer, and cut off any wrinkled or partially printed areas evenly with scissors. Printing over an already printed ar...

19 Trouble-shooting b. If the ribbon is cut: 1. Remove any ribbon remaining in the printer. 2. Remove any incomplete prints. If the next image is printed over the previous image, the ribbon may stick, and it may cause the paper to jam. 3. Reattach the ribbon with cellophane (or similar) tape. 4. Set...

21 Cleaning Platen Roller If there is an indent on the pictures at a regular interval, or if the back of the picture (white side) is dirty, clean the platen roller. There may be dust, grime, adhesives, etc. from the ribbon or paper on the platen roller. 1. Prepare a piece of gauze or other soft clot...

22 Specifications Model JR10-M01 Manufacturer CITIZEN SYSTEMS JAPAN CO., LTD. Print type Thermal dye sublimation transfer Print mode High-speed mode High quality mode Resolution 300 x 300dpi 300 x 600dpi L (5x3.5) 89 x 127mm PC (6x4) 101 x 152mm 2L (5x7) 127 x 178mm Print size A5 (6x8) 152 x 203mm L...

23 Information on servicing the printer For information on use and repair service of the units, please contact your sales agent. Citizen Systems Japan Co., Ltd. http://www.citizen-systems.co.jp 6-1-12, Tanashi-cho, Nishi-Tokyo-shi Tokyo, 188-8511. Japan Tel: +81 (0) 424 68 4608 CITIZEN is a register...