Cisco 6200 - Manual
Cisco 6200 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Hardware Description; Slots 3 and 4: Unoccupied in this release of the system.
- Page 3 – Cisco 6200 Chassis, Front View
- Page 4 – Cisco 6200 Chassis, Rear View; Ethernet Management Bus
- Page 5 – Connections to POTS Splitters or Telephone Lines; Telco Champ Connector; Alarm Relay Connection; Event messages on the console.; Use the alarmcutoff command (at the console or via Telnet); Use a switch or command on your external alarm device
- Page 6 – Auxiliary Port; J17 is the –48V terminal for power circuit A.; Unused Connectors; Caution
- Page 7 – The following fixtures are present on the front panel of each PEM:; Note
- Page 9 – Number of nonidle cells transmitted upstream
- Page 10 – Class 1 laser product.; Warning
- Page 11 – Never look into an optical cable or connector.; Reset Switch; Table 1-3 describes the LEDs on the faceplate of the OC-3 NTC.
- Page 12 – LED
- Page 13 – NTC OC-3 Specifications
- Page 14 – NTC STM-1 Application
- Page 15 – Trunk Port
- Page 16 – LED Indicators
- Page 17 – LEDs on the NTC STM-1
- Page 18 – NTC STM-1 Specifications; The Cisco 6200 is controlled and managed by the MPC.; Specification
- Page 19 – MPC Faceplate; ACO Switch
- Page 20 – Console Port; All LEDs on the MPC are described in Table 1-7.; MPC LEDs
- Page 21 – MPC Specifications
- Page 22 – DMT cards in a single chassis is not supported.; How the SLC Handles Traffic; The SLC separates the upstream and downstream data channels:; Transmission Rates and Modem Training; Two options are available with respect to transmission rates:
- Page 23 – Statistics; Number of nonidle cells transmitted downstream; SLC 8CAP Operation
- Page 24 – Table 1-9 describes the LEDs on the faceplate of the SLC.; SLC 8CAP Faceplate
- Page 25 – SLC 8CAP LEDs
- Page 26 – SLC 8CAP Specifications
- Page 27 – SLC 8DMT Operation; How the SLC 8DMT Handles Traffic
- Page 29 – Number of upstream cells received with invalid header checksum
- Page 30 – SLC 8DMT Faceplate; Table 1-11 describes the LEDs on the faceplate of the SLC.
- Page 31 – SLC 8DMT LEDs
- Page 32 – SLC 8DMT Specifications
C H A P T E R
Cisco 6200 User Guide
1-1
1
Hardware Description
This chapter provides an overview of the Cisco 6200 advanced digital subscriber line access
multiplexer (DSLAM) and describes the system’s hardware components. The chapter is arranged as
follows:
•
Cisco DSL Product Family on page 1-1
•
Cisco 6200 Chassis on page 1-2
•
Network Trunk Cards (NTCs) on page 1-9
•
Management Processor Card (MPC) on page 1-18
•
Subscriber Line Card (SLC) on page 1-22
Warning
For translations of the safety warnings in this chapter, see Appendix C, “Translated Safety
Warnings.”
1.1 Cisco DSL Product Family
The Cisco 6200 is part of a family of digital subscriber line (DSL) products that provide end-to-end
service, carrying data between the subscriber’s home or office, the telephone central office (CO), and
the networks beyond. The Cisco 6000 family includes the following members:
•
The Cisco 6200 DSLAM is a CO-grade multiplexer that supports up to 80 asymmetric digital
subscriber line (ADSL) ports. The Cisco 6200 sends and receives subscriber data (often Internet
service) over existing copper telephone lines, concentrating all traffic onto a single high-speed
trunk for transport to the Internet or the enterprise intranet.
•
ADSL customer premises equipment (CPE) devices, which reside at the subscriber site
connected to PCs or routers, modulate data so that it can travel over telephone lines to the Cisco
6200 DSLAM at the CO. CPE devices in the Cisco DSL product family include the Cisco 675
and the Cisco 605.
•
The Cisco 6200 Manager is an SNMP-based element management application that provides
configuration, monitoring, and management support. The Cisco 6200 Manager offers a graphical
user interface and runs under Windows NT 4.0 and higher. A separate console interface to the
Cisco 6200 DSLAM provides command line access to all management services.
•
ADSL plain old telephone service (POTS) splitters, or voice filters, located both at the subscriber
premises and at the CO, support simultaneous voice and data transmission. (If a subscriber is
using a telephone line for data only, the POTS splitter connection is not required.)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 Hardware Description 78-5296-02 10/02/98 Cisco 6200 User Guide 1-2 The Cisco DSL family also includes a Frame Relay IDSL multiplexer, a service selection gateway,the Cisco 605 card, the Cisco 6100 DSLAM, and an ATM switch to aggregate Cisco 6200 traffic. 1.2 Cisco 6200 Chassis This section describ...
78-5296-02 10/02/98 Hardware Description 1 Cisco 6200 User Guide 1-3 Figure 1-1 Cisco 6200 Chassis, Front View 1.2.2 Backplane Located behind the module compartment, the backplane provides the following services: • Interconnects the MPC, NTC, and SLCs • Connects the SLCs with the subscribers (local ...
1 Hardware Description 78-5296-02 10/02/98 Cisco 6200 User Guide 1-4 Figure 1-2 Cisco 6200 Chassis, Rear View Primary (A) and Secondary (B) H-Buses The backplane’s primary and secondary H-buses (horizontal buses) link the MPC, NTC, and SLCs.In this release, the primary bus carries all traffic. The b...
