Page 2 - Cisco 90-Day Limited Hardware Warranty Terms; Information Packet Number; Go
2 1 Cisco 90-Day Limited Hardware Warranty Terms There are special terms applicable to your hardware warranty and various services that you can use during the warranty period. Your formal Warranty Statement, including the warranties and license agreements applicable to Cisco software, is available o...
Page 3 - Items Not Included; Install Chassis; Safety Information
3 2 Documents, Equipment, and Tools User Documentation All the documents referenced in this quick start guide are available online on Cisco.com. To be sure of obtaining the latest information, you should access the online documentation. To view or print a document in its original page format, access...
Page 4 - Warning Definition
4 Warning Definition Warning IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing acci...
Page 9 - Installing the Chassis; Rack-Mounting the Chassis
9 Warning To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement...
Page 10 - Attaching Brackets
10 The brackets for 19-, 23-, and 24-inch racks are shown in Figure 1. Figure 1 Brackets for Rack-Mounting of Routers with 1-RU Chassis Height Attaching Brackets Attach the mounting brackets to the chassis as shown in Figure 2 through Figure 8, using the screws provided. Attach the second bracket to...
Page 12 - Installing Chassis in Rack; Attaching Rubber Feet
12 Figure 7 Bracket Installation for Center Mounting with Rear Panel Forward: 19-, 23-, or 24-Inch Rack Figure 8 Bracket Installation for Center Mounting with Front Panel Forward: 19-, 23-, or 24-Inch Rack Installing Chassis in Rack Install the chassis in the rack. Rack-mounting screws are not provi...
Page 13 - Attaching to Wall; Installing on a Desktop; Grounding the Chassis
13 Figure 9 Attaching the Brackets for Wall-Mounting Attaching to Wall Attach the chassis to the wall: • Position the end nearest the power cable at the top. • Align screws (not included) with a wall stud, or use wall anchors. Installing on a Desktop If you are installing a Cisco 2610XM, Cisco 2620X...
Page 14 - Connect Cables; System Management Connections; Port Color
14 Step 3 Attach the ground lug or ring terminal to the chassis as shown in Figure 10 or Figure 11. For the ground lug, use the two screws with captive locking washers provided. For a ring terminal, use one of the screws provided. Use a number 2 Phillips screwdriver, and tighten the screws to a torq...
Page 15 - Power Connections; Connecting Routers to AC Power; Connecting the Router to DC Power; DC Wiring Requirements; DC Power Source
15 Power Connections Warning Read the installation instructions before connecting the system to the power source. Statement 1004 Note The installation must comply with all required electrical codes applicable at the installation site. Connecting Routers to AC Power If your router uses AC power, conn...
Page 16 - Wiring Procedure for Nominal 48 VDC Input
16 Wiring Procedure for Nominal 48 VDC Input To connect the router to a DC power source, perform this procedure: Step 1 Remove power from the DC circuit. To ensure that power is removed from the DC circuit, locate the circuit breaker for the DC circuit, switch the circuit breaker to the OFF position...
Page 17 - Connecting Routers to the Cisco Redundant Power System; Port or Connection
17 Connecting Routers to the Cisco Redundant Power System If your router uses the Cisco Redundant Power System (RPS), refer to the Cisco RPS Hardware Installation Guide for instructions about the power connections. To locate these documents, see the “Where to Go Next” section on page 24. WAN, LAN, a...
Page 18 - Power Up the Router; Checklist for Power-Up
18 5 Power Up the Router Checklist for Power-Up You are ready to power up the Cisco router after you have completed the following steps: • Chassis is securely mounted and grounded. • Power and interface cables are connected. • Your PC terminal emulation program is configured for 9600 baud, 8 data bi...
Page 19 - Perform Initial Configuration
19 You may see different startup messages: • If you see the following messages, the router has booted with a configuration file and is ready for initial configuration using the Cisco Router and Security Device Manager (SDM): yourname con0 is now available Press RETURN to get started. See the “Initia...
Page 20 - Initial Configuration Using the Setup Command Facility
20 Initial Configuration Using Cisco Router and Security Device Manager If the following messages appear at the end of the startup sequence, Cisco Router and Security Device Manager (SDM) is installed on your router: yourname con0 is now available Press RETURN to get started. For instructions on con...
Page 22 - Initial Configuration Using the CLI (Manual Configuration)
22 Step 11 The configuration appears: The following configuration command script was created: hostname 2610 enable secret 5 $1$D5P6$PYx41/lQIASK.HcSbfO5q1 enable password xxxxxx line vty 0 4 password xxxxxx snmp-server community public ! no ip routing ! interface FastEthernet0/0 no shutdown media-ty...
Page 23 - Interface Numbering; WAN and LAN Interface Numbering
23 For interface numbering information, see the “Interface Numbering” section on page 23. Step 1 To proceed with manual configuration using the CLI, enter no . Would you like to enter the initial configuration dialog? [yes/no]: no Step 2 Press Return to terminate autoinstall and continue with manual...
Page 24 - Voice Interface Numbering; Where to Go Next
24 • First built-in Ethernet interface—Ethernet 0/0 • Second built-in Ethernet interface—Ethernet 0/1, or optionally in Cisco 2612 and Cisco 2613 only: Token Ring interface 0/0 Figure 13 Interface Numbering in Chassis with 1-RU Height Voice Interface Numbering Voice interfaces are numbered as follow...
Page 25 - Obtaining Documentation; Ordering Documentation; Documentation Feedback
25 To access documentation using Cisco Connection Online (CCO): For Cisco 2600XM series platform documentation, start on Cisco.com at http://www.cisco.com , and click the “Technical Documentation” tab under Useful Links. Under the Product Documentation heading, navigate to Modular Access Routers and...
Page 26 - Obtaining Technical Assistance; Cisco Technical Support Website; Definitions of Service Request Severity
26 11 Obtaining Technical Assistance For all customers, partners, resellers, and distributors who hold valid Cisco service contracts, Cisco Technical Support provides 24-hour-a-day, award-winning technical assistance. The Cisco Technical Support Website on Cisco.com features extensive online support...
Page 27 - Obtaining Additional Publications and Information
27 12 Obtaining Additional Publications and Information Information about Cisco products, technologies, and network solutions is available from various online and printed sources. • Cisco Marketplace provides a variety of Cisco books, reference guides, and logo merchandise. Visit Cisco Marketplace, ...
