Chief MSP-DCCMD - Manual
Chief MSP-DCCMD – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Installation Instructions; IMPORTANT WARNINGS AND CAUTIONS!; corresponding instructions.; DIMENSIONS; Front View
- Page 3 – CONTENTS; Table 1: JWD Speifications
- Page 4 – PARTS
- Page 5 – Table 2 below provides a list of the JWD parts.
- Page 6 – WALL BRACKET INSTALLATION; Secure Wall Bracket; back; Figure 2: Secure Wall Bracket; Wood; Set Screw
- Page 7 – Flush Mount Centris Bracket to Display; Align the mounting holes on the Centris bracket with; Recess Mount Centris Bracket to Display; If your display uses a screw size other; Figure 4: Flush Mount Centris Bracket to Display; Display
- Page 8 – Attach Interface Adapter to Display; Place display face down on a clean dry surface.; Attach Display to Centris Bracket; Hang the mount from the two screws started in Step 1.; Figure 6: Attach Interface Breacket to Display; Centris Bracket
- Page 9 – Figure 8: Attach 400mm x 200mm Interface Adapter
- Page 10 – CABLE MANAGEMENT; LATERAL TENSION ADJUSTMENT; Figure 11: Cable Management
I N S T A L L A T I O N I N S T R U C T I O N S
CHIEF MANUFACTURING INC.
1-800-582-6480
952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE 700
SAVAGE, MINNESOTA 55378 USA
8832-000088 Rev. C
©
2006 Chief Manufacturing
www.chiefmfg.com
Printed in USA 03/06
BEFORE YOU BEGIN
Medium Flat Panel
Dual Swing Arm Wall Mount (JWD)
Model MSP-DCCMD
The JWD single swing arm wall mount was designed for
mounting a medium sized flat panel display. The JWD
can swing out from the wall or fold against the wall,
depending on your ergonomic need. The mount itself can
be tilted +15º. The amount of tilt left and right depends on
the size and location of the display.
The JWD is shipped with the VESA® 100mm/100mm
Centris™ interface which is compatible with most medium
flat panels. To accommodate the mounting hole patterns
on existing medium flat panels that are offered in different
sizes, the JWD is supplied with two interface adapters,
listed below:
•
The 200mm/100mm interface adapter
•
The interface adapter that accomodates the
400mm/200mm and 550mm/235mm hole
patterns
The JWD will more than likely adapt to your medium flat
panel display, providing that your display does not exceed
the specified weight rating.
CAUTION:
To prevent damage to the JWD, which could affect or void the Factory warranty, and to the equipment
that will be attached to it, thoroughly study all instructions and illustrations before you begin the installation. Pay
particular attention to the “Important Warnings and Cautions” on Page 2.
•
The maximum weight to be installed on the JWD wall mount is 75 pounds (34 kg).
•
The JWD wall mount is designed to be installed using wall studs or supporting framework. The structure to which
the JWD wall mount is anchored must be capable of supporting five times the total weight of the mount and all
attached equipment.
•
If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480.
•
If a defect is discovered after Dell’s initial 21-day Customer Satisfaction period, Chief Mfg. will, at its option,
repair or replace the product at no charge provided it is returned during the warranty period. Please note contact
information for Chief Mfg. listed below:
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Model MSP-DCCMD Installation Instructions 2 IMPORTANT WARNINGS AND CAUTIONS! WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow ...
Installation Instructions Model MSP-DCCMD 3 CONTENTS TOOLS REQUIRED FOR INSTALLATION • Electric drill and bit set • Hex wrench set • Phillips screwdriver • Level NOTE: Other tools may be required depending on the mounting surface and method of installation. Inspect The Unit Before Installing WARNING...
Model MSP-DCCMD Installation Instructions 4 PARTS Figure 1: JWD PARTS Centris Interface(see notes) Set Screw(see notes) 130 140 150 160 170 180 20 30 40 50 60 70 80 90 110120 190 100
