Chauvet QSPOT - Manual

Q- Spot™ 150-LED User Manual 5 9/22/2009 3:57 PM 2. I NTRODUCTION Features 9 or 12-channel DMX LED moving yoke Pan: 530º / Tilt: 270º Color wheel 9 colors + white Rainbow color spin at variable speeds Rotating gobo wheel with gobo shake 7 interchangeable, slot-n-lock gobos + open Gobo wheel spin at ...

Q- Spot™ 150-LED User Manual 6 9/22/2009 3:57 PM Product Overview DMX in Up Enter Menu Down Power on/off switch Power input/fuse holder Cooling fan vent DMX out

Q- Spot™ 150-LED User Manual 7 9/22/2009 3:57 PM Product Dimensions

Q- Spot™ 150-LED User Manual 8 9/22/2009 3:57 PM 3. S ETUP Fuse Replacement 1) With a flat head screwdriver wedge the fuse holder out of its housing. 2) Remove the damaged fuse from its holder and replace with exact same type and rating fuse. 3) Insert the fuse holder back in its place. 4) Reconnect...

Q- Spot™ 150-LED User Manual 9 9/22/2009 3:57 PM Gobo and Color Wheel Diagrams

Q- Spot™ 150-LED User Manual 10 9/22/2009 3:57 PM Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX controller or to run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined number of channels required by ...

Q- Spot™ 150-LED User Manual 11 9/22/2009 3:57 PM This drawing provides a general illustration of the DMX Input/Output panel of a lighting fixture. Universal DMX Controller Continue the link Often, the setup for Master-Slave and Standalone operation requires that the first fixture in the chain be in...

Q- Spot™ 150-LED User Manual 12 9/22/2009 3:57 PM Note! Safety cable is sold separately. Hanging Clamp Safety cable Mounting Orientation This fixture may be mounted in a vertical hanging or floor mounted position, provided there is adequate room for ventilation. Rigging It is important never to obst...

Q- Spot™ 150-LED User Manual 13 9/22/2009 3:57 PM 4. O PERATING I NSTRUCTIONS Navigating the Control Panel Access control panel functions using the four panel buttons located directly underneath the LCD Display. The Control Panel LCD Display shows the menu items you select from the menu map. When a ...

Q- Spot™ 150-LED User Manual 14 9/22/2009 3:57 PM Menu Map M AIN F UNCTION S UB -F UNCTION S ELECTION I NSTRUCTION 1-Intro 1.1 Address 000 ~ 255 Sets the DMX starting address 1.2 Reset Yes ~ No Resets the fixture to the “home” position 1.3 Operation DMX-512 Sets the fixture to DMX mode Auto_1 Sets t...

Q- Spot™ 150-LED User Manual 18 9/22/2009 3:57 PM Setting the DMX Starting Address This DMX mode enables the use of a universal DMX controller device. Each fixture requires a "start address" from 1 to 512. A fixture requiring one or more channels for control begins to read the data on the ch...

Q- Spot™ 150-LED User Manual 19 9/22/2009 3:57 PM General Maintenance To maintain optimum performance and minimize wear fixtures should be cleaned frequently. Usage and environment are contributing factors in determining frequency. As a general rule, fixtures should be cleaned at least twice a month...

Q- Spot™ 150-LED User Manual 20 9/22/2009 3:57 PM Q- Spot™ 150-LED Troubleshooting Symptom Solution(s) Beam is very dim or not bright Clean optical SYSTEM Breaker/Fuse keeps blowing Check total load placed on device Device has no power Check for power on Mains. Check device’s fuse. (internal and/or ...

Q- Spot™ 150-LED User Manual 21 9/22/2009 3:57 PM Exploded View Description Part Number Description Part Number 1 Display PCB P170-QS1DIS 16 Color Wheel P150-QS1COW 2 Driver PCB (in side arm) P255-QS1DRA 17 Gobo wheel P115-QS1GOW 3 Driver PCB (in head) P255-QS1DRH 18 Color motor P110-QS1COM 4 Electr...

Q- Spot™ 150-LED User Manual 22 9/22/2009 3:57 PM Photometrics Technical Specifications WEIGHT & DIMENSIONS Length .......................................................................................................................... 9.5 in (242 mm) Width........................................