Chauvet INTIMIDATORSCANLED300 - Manual

Page 6 of 17 Intimidator Scan LED 300 User Manual (Rev. 3) Product Overview Bracket Adjustment Knob DMX In DMX Out Power Out Fuseholder Power In Voltage Selection Switch (115/230 VAC) Safety

Page 7 of 17 Intimidator Scan LED 300 User Manual (Rev. 3) 3. S ETUP AC Power This fixture is switchable and runs on either 115 VAC, 60 Hz or 230 VAC, 50 Hz power. Before powering on the unit, make sure the line voltage to which you are connecting it matches the current setting on the voltage select...

Page 8 of 17 Intimidator Scan LED 300 User Manual (Rev. 3) Mounting Orientation The Intimidator™ Scan LED 300 may be mounted in any position provided there is adequate room for ventilation. Rigging Be sure that the structure can support the weight of the fixture. Please see the “Technical Specificat...

Page 9 of 17 Intimidator Scan LED 300 User Manual (Rev. 3) 4. O PERATING I NSTRUCTIONS Using the Control Panel Access control panel functions using the four buttons located directly underneath the LED display on the included wired remote. B UTTON F UNCTION <MODE ESC> Used to scroll through the...

Page 10 of 17 Intimidator Scan LED 300 User Manual (Rev. 3) Operation DMX Operation This is the operating mode which will allow for control with an external DMX controller. You must set the starting address for this mode. If this is your first time using DMX, then it is recommended that you refer to...

Page 11 of 17 Intimidator Scan LED 300 User Manual (Rev. 3) Sound-Active This fixture has a preprogrammed, sound triggered chase. Access this via the control panel on the front of the fixture. Please see the chart below for further explanation. 1. Press <MODE/ESC> until one of the standalone m...

Page 12 of 17 Intimidator Scan LED 300 User Manual (Rev. 3) DMX Channel Values 11-CH Mode C HANNEL V ALUE F UNCTION C HANNEL V ALUE F UNCTION 1 000  255 Pan 0°~180° 7 000  015 016  127 128  239 240  255 Gobo Rotation Stop Rotate Counter-clockwise (slow  fast) Rotate Clockwise (slow  fast) Gob...

Page 14 of 17 Intimidator Scan LED 300 User Manual (Rev. 3) 5. A PPENDIX General Troubleshooting S YMPTOM P OSSIBLE C AUSE ( S ) P OSSIBLE A CTION ( S ) Breaker/Fuse keeps blowing Excessive circuit load Check total load placed on the electrical circuit. Short circuit along the power wires Check for ...

Page 15 of 17 Intimidator Scan LED 300 User Manual (Rev. 3) General Maintenance To maintain optimum performance and minimize wear, fixtures should be cleaned frequently. Usage and environment are contributing factors in determining frequency. As a general rule, fixtures should be cleaned at least tw...

C ONTACT U S W o r l d W i d e General Information CHAUVET® 5200 NW 108 th Ave Sunrise, FL 33351 voice: 954.929.1115 fax: 954.929.5560 toll free: 800.762.1084 Technical Support CHAUVET® 5200 NW 108 th Ave Sunrise, FL 33351 voice: 954.929.1115 (Press 4) fax: 954.929.5560 (Attention: Service) World Wi...