Central Pneumatic 97512 - Manual
Central Pneumatic 97512 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS
- Page 5 – Unpacking
- Page 6 – Air Connection Setup; tape before threading it into the
- Page 7 – Operation
- Page 9 – Maintenance
- Page 10 – Parts List
- Page 11 – Assembly Drawing
- Page 12 – 0 Day Warranty; ER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MER-
CONCRETE “T” NAILER
(3/4” TO 2-1/2”)
ASSEMBLY and OPERATING INSTRUCTIONS
Model
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2007 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual
or any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
97512
90342
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 4 SKU 90342 SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS 1. Important consumer information: This Nailer is equipped with a contact trip Trigger. This Trigger mechanism is designed primarily for high volume work where exact placement of the nail is not critical. By holding the Trigger, the Nailer w...
Page 5 SKU 90342 12. Do not drive nails on top of other nails, or with the tool at too steep an angle. The nails can ricochet, causing personal injury. 13. Do not drive nails close to the edge of a workpiece. The workpiece is likely to split, allowing the nail to fly free or ricochet and cause perso...
Page 6 SKU 90342 Air Connection Setup Concrete Nailer 1/4”-18 NPT For best service you should incorporate an oiler, regulator, and inline filter, as shown in the diagram above. Hoses, couplers, oilers, regulators, and filters are all available at Harbor Freight Tools.1. You will need to prepare a 1/...
