Central Pneumatic 94734 - Manual
Central Pneumatic 94734 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SPECIFICATIONS; SAVE THIS MANuAl; gENERAl SAFETY RulES; REAd ANd uNdERSTANd All INSTRuCTIONS; WORK AREA; Keep your work area clean and well lit.
- Page 4 – SERVICE; SPECIFIC SAFETY RulES; CAuTION! Prior to its; first; use, and thereafter prior to each; subsequent; detergent compressor oil to the specified level.; Running the Air Compressor
- Page 6 – uNPACKINg; Parts list
- Page 7 – SETuP; dipstick; The Dipstick is used to determine if oil is needed.; Never operate the compressor with-; The oil; Install an Air Intake Filter and Hose (not included); illustrated on the next page.
- Page 8 – OPERATION; ditions. Make any necessary repairs before using again.; Verify oil level is correct.; MuST; When the pressure is above 115 PSI, the compressor shuts off.; Adjusting Pressure gauge and Pressure Adjustment Screw; tional stress on the motor which may shorten motor life.; Turn the Air Flow Valve to the appropriate pressure.
- Page 9 – MAINTENANCE; by removing the Drain Plug. Replace the oil once a year.; PARTS lIST “A”; individually as replacement parts.; PlEASE REAd THE FOllOWINg CAREFullY
- Page 10 – See Drawing “A” below.; ASSEMblY dRAWINg “A”; Overload
- Page 11 – PARTS lIST “b”
- Page 12 – ASSEMblY dRAWINg “b”; individually as replacement parts
- Page 13 – TROublESHOOTINg guIdE
- Page 14 – Symptom; lIMITEd 1 YEAR / 90 dAY WARRANTY; which vary from state to state.
3 HP TWIN TANK AIR
COMPRESSOR
Model
94734
SET uP ANd OPERATINg INSTRuCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANuAl.
Copyright
©
2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork con-
tained herein may be reproduced in any shape or form without the express written consent of Harbor Freight
Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein. Tools required for assembly and service may not
be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 10d
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 94734 For technical questions, please call 1-800-444-3353. Page 2 SPECIFICATIONS Motor Power 1 3 / 4 HP (working), 3 HP (Peak), 1720 RPM; 120 V~, 60 Hz, 1 Phase, 11 A Air Tank Size 5 gallons Pump Single stage Air Outlet Fitting Size 1 / 4 inch NPT barbed Air Delivery 3.8 CFM at 90 PSI; 4.5 CFM a...
SKU 94734 For technical questions, please call 1-800-444-3353. Page 4 is designed. Never attempt to force the compressor to provide more pressure than it was designed for. do not use the compressor if the Power Switch does not turn it on or turn it 2. off. Any compressor that cannot be controlled wi...
SKU 94734 For technical questions, please call 1-800-444-3353. Page 6 THIS AIR COMPRESSOR MAY REquIRE A dEdICATEd ElECTRICAl CIRCuIT 15. AS THE AMPERAgE dRAW uNdER Full lOAd, COMbINEd WITH uSE OF ANY OTHER ITEM, MAY OVERlOAd YOuR CIRCuIT. Always turn off the Air Compressor in the event of a power fa...
