Central Pneumatic 39092 - Manual
Central Pneumatic 39092 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 5 – Unpacking
- Page 6 – Operation; For smoother operation and to extend the life-span; Testing the Contact Safety Trip Mechanism; Make sure the tool is disconnected from the air supply.; Do not to go over the maximum
- Page 7 – Loading Brads; The tool
- Page 8 – Operating the Nailer; Do not go over the maximum 100 PSI.
- Page 9 – Clearing Jams; With the Front of the tool pointed away from you,; open the Driver Guide; Anytime; Disconnect the Nailer from the air hose.
- Page 10 – Please Read the Following Carefully
- Page 11 – PARTS LIST
- Page 12 – ASSEMBLY DIAGRAM
AIR BRAD NAILER
1-1/4” TO 2-1/2”
Model 39092
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
Copyright
2005 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
®
©
REV 06/05
®
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 5 SKU 39092 For technical questions, please call 1-800-444-3353. 24. Do not fire fasteners too close to the edge of a workpiece. They may split the workpiece and fly free, causing personal injury. 25. Take caution, as some woods contain preservatives such as copper chro-mium arsenate (CCA) whic...
Page 6 SKU 39092 For technical questions, please call 1-800-444-3353. Operation For best service, you should incorporate an oiler, regulator, and inline filter, as shown in the diagram below. Hoses, couplers, oilers, regulators, and filters are all avail-able at Harbor Freight Tools. Note: For smoot...
Page 7 SKU 39092 For technical questions, please call 1-800-444-3353. Loading Brads ALWAYS WEAR ANSI APPROVED IMPACT SAFETY GOGGLES WHEN RELOADING OR DOING ANY OTHER MAINTENANCE ON THIS TOOL. Other people in the work area must also wear ANSI approved impact safety goggles. Warning! Make sure the Nai...
