Cecilware ME10-GN - Manual

Cecilware ME10-GN

Cecilware ME10-GN – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
Page: / 11

Table of Contents:

  • Page 2 – PROPANE GAS; GAS SPECIFICATIONS
  • Page 3 – OPEN WINDOWS; Do not place anything over the flue opening.
  • Page 5 – FOR QUALIFIED SERVICE PERSONNEL ONLY; Shut off water supply and disconnect power to the boiler.; Pilot Adjustment Screw
  • Page 10 – COMPONENT TESTS
  • Page 11 – CECILWARE CORPORATION
Loading the manual

ME10-GN ME15-GN

AUTOMATIC GAS WATER BOILER

Operation Manual

NQ24A 12-2006

CONTENTS

Specifications
Start up Instructions
Trouble Shooting Guide

Parts List

Wiring Diagram

18 Gauge Type 304L

Stainless Steel
construction to resist
corrosion.
Solid State water level
control for automatic

refill

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - PROPANE GAS; GAS SPECIFICATIONS

WATER INLET (1/4 " FLARE) 16.0 3.4 SIDE ACCESS DOOR(SLIDES UP) OVERFLOW THERMOMETER 4.0 "B" 14.0 5.0 CAUTION HOT SURFACES ME10-GN NP87A TEMPERATURE CONTROL NOTE: UNIT IS SUPPLIED WITH A GROUNDED 120V-15A LINE CORD AND PLUG (NEMA 5-15P). PROPANE GAS BTU/ HR @ 10" W.C. 12,000 NATURAL G...

Page 3 - OPEN WINDOWS; Do not place anything over the flue opening.

2 FOR YOUR SAFETY DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE. THIS INSTALLATION MUST CONFORM WITH THE NATIONAL FUEL GAS CODE , ANSI Z223.1 (LATEST EDITION). WARNING: IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINT...

Page 5 - FOR QUALIFIED SERVICE PERSONNEL ONLY; Shut off water supply and disconnect power to the boiler.; Pilot Adjustment Screw

4 NOTE: On the first lighting it may be necessary to hold the dial for a longer period to allow trapped air to escape from the line. DIAL SETTINGS AND CORRESPONDING WATER TEMPERATURES: “1”= 50F, “10”=198F RELIGHTING: Shut off all gas and wait approximately 5 minutes before relighting the pilot. SHUT...

Other Cecilware Models

All Cecilware Other