Canon ZR60 - Manual

6 Intr oduction E Table of Contents Introduction Reference Guide ..............................................................................................................5Thank You for Choosing a Canon ................................................................................9Introducing ...

7 Intr oduction Adjusting the AE Shift ..................................................................................................77Setting the Shutter Speed............................................................................................78Setting the White Balance ...................

8 Intr oduction Conventions Used in This Manual Operating Modes : ZR70 MC and ZR65 MC only. Available functions depend upon the operating mode. It is indicated as follows: : Function can be used in this mode. : Function cannot be used in this mode. Other Symbols and References ❍ : Reference page num...

9 Intr oduction E Thank You for Choosing a Canon The Canon ZR70 MC/ZR65 MC/ZR60 provides a full range of options and functions. We recommend reading this manual thoroughly before you use the camcorder. It will help you to become more familiar with your camcorder, and learn how to operate it properly...

11 Intr oduction E Components Guide ZR70 MC/ZR65 MC/ZR60 P 1 2 3 4 5 6 7 8 9 DATA CODE MIX/ SLIDE SHOW DIGITAL EFFECTS ON/OFF REC (record) SEARCH – button (p. 35) / Record review button (p. 35) / (rewind) button (p. 37) / CARD – button* (p. 111) REC SEARCH + button (p. 35) / (fast forward) button (p...

14 Intr oduction E W T WIRELESS CONTROLLER WL-D79 START/STOP PHOTO ZOOM SELF T. D.EFFECT. ON/OFF SET MENU TV SCREEN REW PAUSE AV INSERT AV DV REMOTE SET SLOW 2 PLAY STOP FF ZERO SET MEMORY REC PAUSE 12bit AUDIO OUT SEARCH SELECT DATA CODE AUDIO DUB. INDEX SLIDE SHOW CARD WIRELESS CONTROLLER WL-D80 S...

15 Mastering the Basics E Using a Household Power Source You can operate the camcorder from a household power source using the supplied power adapter. The power adapter converts current from a power outlet (100-240 V AC, 50/60 Hz) to the DC current used by the camcorder. 1. Turn the POWER switch to ...

16 Mastering the Basics E Attaching and Charging the Battery Pack Charge the battery pack with the supplied power adapter before you use the camcorder for the first time and subsequently when the message “CHANGE THE BATTERY PACK” appears. 1. Turn the POWER switch to OFF. 2. Move the viewfinder upwar...

17 Mastering the Basics Charging, Recording and Playback Time Below times are approximate and vary according to the charging, recording or playback conditions. Charging Time • Charge the battery pack in temperatures between 41º F and 104º F (5º C and 40º C).• A lithium ion battery pack can be charge...

How much power is left? The battery symbols indicate the charge status of the battery pack. When the battery pack is empty, “CHANGE THE BATTERY PACK” appears for 4 seconds and starts flashing. The battery charge indicators are not constant – they vary according to the condition under which battery p...

19 Mastering the Basics E Installing the Backup Battery The backup battery allows the camcorder to retain date, time and other camcorder settings while the power source is disconnected. Power the camcorder from a household power source or with a battery pack when replacing the backup battery. 1. Ope...

20 Mastering the Basics E Preparing the Camcorder Adjusting the Viewfinder (Diopter Adjustment) 1. Turn on the camcorder and keep the LCD panel closed to adjust theviewfinder. 2. Adjust the diopter adjustment lever. Do not leave the viewfinder exposed to direct sunlight as it may melt (due toconcent...

21 Mastering the Basics E Attaching the Shoulder Strap For extra security and portability, attach the shoulder strap before using the camcorder. Pass the ends through the strap mountand adjust the length of the strap. Mounting the Wide Attachment The WA-30.5 Wide Attachment gives you a wide perspect...

22 Mastering the Basics E Loading a Cassette Use only videocassettes marked with the D logo. Loading and Unloading 1. Slide and hold the OPEN/EJECT switch and open the cassettecompartment cover. The cassette compartment opens automatically. 2. Load/unload the cassette. • Load the cassette with the w...

23 Mastering the Basics Protecting Tapes from Accidental Erasure To protect your recordings from accidental erasure, slide the tab on the cassette to the left. (This switch position is usually labeled SAVE or ERASE OFF.) If you load a protected cassette in CAMERA mode, the message “THE TAPE IS SET F...

24 Mastering the Basics E Using the Wireless Controller You can operate the camcorder with the supplied wireless controller from a distance of up to 16 feet (5 m). Point it at the camcorder’s remote sensor when you press the buttons. Following functions cannot be operated without the wireless contro...

25 Mastering the Basics E Setting the Time Zone, Date and Time Set the time zone, date and time when you first start using your camcorder. Install the backup battery before you begin ( 19). Setting the Time Zone/Daylight Saving Time 1. Press the MENU button to open the menu. 2. Turn the selector dia...

26 Mastering the Basics E ❍ Once you have set time zone, date and time, you do not need to reset theclock each time you travel to another time zone. Just set the time zone to theone of your destination, and the camcorder automatically adjusts the clock. ❍ Days per month and leap years will be automa...

27 Mastering the Basics 2. Turn the selector dial to select [SYSTEM] and press the selector dial. 3. Turn the selector dial to select [D/TIME SET] and press the selector dial. The year display starts to flash. 4. Turn the selector dial to select the year, and press the selector dial. • The next part...

28 Mastering the Basics E Recording Movies on a Tape You can use the LCD screen or the viewfinder when recording. Before You Begin Recording Make a test recording first to check if the camcorder operates correctly. Before you make important recordings, clean the video heads ( 142). Preparations Conn...

29 Mastering the Basics When You Have Finished Recording 1. Turn the POWER switch to OFF. 2. Close the LCD panel. 3. Replace the lens cap. 4. Unload the cassette. 5. Disconnect the power source. When recording outdoors or through a window, do not leave LCD screen,viewfinder or lens exposed to direct...

30 Mastering the Basics E Zooming The camcorder’s zoom lens allows you to choose the best picture angle for your recordings. The camcorder automatically switches between optical zooming and digital zooming. Image resolution is slightly lower with the digital zoom. Optical Zoom Move the zoom lever to...

32 Mastering the Basics E Using the LCD Screen 1. Push the OPEN button at the LCD panel and open the LCD panel. The LCD screen switches on and the viewfinder switches off. 2. Rotate the LCD panel and choose the angle of the screen. You can rotate the LCD panel so that the screen faces in the same di...

33 Mastering the Basics E Adjusting the Brightness of the LCD Screen 1. Press the MENU button to open the menu. 2. Turn the selector dial to select [DISPLAY SET UP] and press the selector dial. 3. Turn the selector dial to select [BRIGHTNESS] and press the selector dial. 4. Turn the selector dial an...

35 Mastering the Basics E Searching and Reviewing when Recording Record Review In record pause mode, this function allows you to review the last few seconds of your recording to check if it has been recorded properly. Press and release the c (record review) button. The camcorder rewinds the tape, pl...

36 Mastering the Basics E Tips for Making Better Videos Holding the Camcorder For maximum stability, grip the camcorder in your right hand and keep your right elbow pressed against your body. If necessary, support the camcorder with your left hand. Be careful that your fingers do not touch the micro...

37 Mastering the Basics E Playing Back a Tape When you use the LCD screen for playback, the camcorder plays back the sound via built-in speaker. The built-in speaker is monaural. Use headphones for stereo sound or when using the viewfinder for playback. Preparations Connect a power source. Load a ca...

38 Mastering the Basics E Special Playback Modes Special playback modes (except of playback pause and fast/rewind playback) can only be operated with the wireless controller. e / a (Playback Pause) To pause playback, press the e / a button. Press the e / a button to resume playback. The camcorder go...

39 Mastering the Basics Playing Back with the Built-in Speaker/Headphones When using the built-in speaker, make sure that “ H ” is not displayed on the screen. When using the headphones, make sure that “ H ” is displayed. Change the setting as necessary following the procedure below. Switching the A...

40 Mastering the Basics E Adjusting the Volume *Headphone volume only. Turn the selector dial up to increase the volume, anddown to lower the volume. • A volume bar appears for 4 seconds. • You can turn off the volume completely by turning the selector dial down until OFF appears. Turn the selector ...

41 Mastering the Basics E Playing Back on a TV Screen You can connect the camcorder to a TV or VCR to play back your recordings on a TV screen. ❍ Make sure that “ H ” is not displayed on the screen. If “ H ” is displayed, change the setting ( 39). ❍ When you use the TV as a monitor during recording,...

42 Mastering the Basics 3. Connect the STV-250N Stereo Video Cable to the camcorder’s AV terminal and the audio terminals of the TV/VCR. Connect the white plug to the white AUDIO terminal L (left), and the red plug to the red AUDIO terminal R (right). Do not connect the yellow plug. 4. If connecting...

43 Mastering the Basics Selecting the Audio Output Channel You can select the output channels when playing back a tape with audio recorded on two channels. 1. Press the MENU button to open the menu. 2. Turn the selector dial to select [AUDIO SET UP] and press the selector dial. 3. Turn the selector ...

44 Using the Full Range of Featur es E Menus and Settings Many of the camcorder’s advanced functions are selected from menus that appear on the screen. Selecting Menus and Settings 1. Set the camcorder to the correct operating mode. 2. Press the MENU button to open the menu. 3. Turn the selector dia...

45 Using the Full Range of Featur es E Menu and Default Settings Default settings are shown in boldface. CAMERA Menu (CAM. MENU) CARD CAMERA CARD CAMERA PLAY (VCR) CAMERA Submenu Menu Item Setting Options \ CARD MIX * 2 MIX TYPE CARD CHROMA , CARD LUMI., 122 CAM. CHROMA, C. ANIMATION ANIMAT. TYPE CO...

49 Using the Full Range of Featur es E Changing the Remote Sensor Mode Two remote sensor modes and an off setting are available to prevent interference from other Canon wireless controllers being used nearby. Turning the Remote Sensor Off Open the menu and select [SYSTEM]. Select [WL.REMOTE], set it...

50 Using the Full Range of Featur es E Customizing the Camcorder You can personalize your camcorder by customizing the start-up image and the sound it makes for start-up, shutter*, start/stop and self-timer (collectively called the My Camera settings). * ZR70 MC and ZR65 MC only. With the ZR70 MC an...

51 Using the Full Range of Featur es E Setting the Light-up Buttons The buttons above the LCD panel light up when the camcorder’s power is on, or when you press a button. This is helpful if, for example, you wish to play back a tape in dark places. You can select the color of the light-up buttons fr...

52 Using the Full Range of Featur es E Other Camcorder Settings Beep You will hear a beep upon camcorder operations such as power on/off, start/stop, self- timer countdown, automatic shut-off, and unusual conditions of the camcorder. The beep will not be recorded. If you turn off the beep, all camco...

53 Using the Full Range of Featur es Demonstration Mode The demonstration mode displays the camcorder’s main features. It starts automatically when you leave the camcorder turned on without loading a cassette (ZR70 MC/ZR65 MC: and without inserting a memory card) for more than 5 minutes. You can als...

55 Using the Full Range of Featur es E Recording Still Images on the Tape You can record still images on the tape. Starting your recording with a still image allows you to easily locate the beginning of the recording with the Photo Search function ( 85). In Record Pause Mode 1. Press the PHOTO butto...

57 Using the Full Range of Featur es E Using the Recording Programs The camcorder is equipped with the Easy Recording program and several program AE modes. The availability of functions differs depending on the selected mode. Availability of Functions in Each Mode: A: Auto setting h : Available × : ...

58 Using the Full Range of Featur es E Sports Use this mode to record sports scenes (such as tennis or golf), moving objects (such as roller coasters) or when recording from a moving car. ❍ This mode is set at a high shutter speed and should therefore be used in sufficientlight. ❍ This mode is mainl...

59 Using the Full Range of Featur es Night Use this mode to record in dark places. The shutter speed is adjusted automatically. It is useful when recording in places with changing light conditions (such as in amusement parks). ❍ Night mode cannot be used in CARD CAMERA mode. ❍ Moving subjects may le...

60 Using the Full Range of Featur es Selecting the Program AE Mode 1. Slide the program selector to Q (program AE). 2. Press the selector dial. A list of the program AE modes appears. 3. Select a mode and press the selector dial. The symbol of the mode appears on the upper left corner of the screen....

61 Using the Full Range of Featur es E Using Digital Effects You can use the digital effects during recording and playback. Faders ( 62): Begin or end scenes with a fade to or from black. Effects ( 65): Add flavor to your recordings. Multi-image screen ( 67) Availability of Digital Effects by Operat...

62 Using the Full Range of Featur es Faders Fade Trigger (FADE-T) Wipe (WIPE) Corner Wipe (CORNER) Jump (JUMP) Flip (FLIP) E The image gradually fades in. The image gradually fades out. The image begins as a vertical line in the center and expands sideways until it fills the whole screen. The image ...

64 Using the Full Range of Featur es Selecting a Fader 1. In CAMERA mode, set the program selector to Q . 2. Press the DIGITAL EFFECTS button. [D.EFFECTS | ], [FADER], [EFFECT] and [MULTI-S] appear. 3. Select [FADER]. 4. Select the fader option. 5. Press the DIGITAL EFFECTS button. The name of the s...

65 Using the Full Range of Featur es E Effects Art (ART) The image becomes like a paint (solarization). Black and White (BLK & WHT) The image becomes black and white. Sepia (SEPIA) The image becomes monochrome with a brownish tint. Mosaic (MOSAIC) The image is blurred through enlarging the size ...

66 Using the Full Range of Featur es Selecting an Effect 1. Press the DIGITAL EFFECTS button. [D.EFFECTS OFF], [FADER], [EFFECT] and [MULTI-S] appear. 2. Select [EFFECT]. 3. Select the effect. 4. Press the DIGITAL EFFECTS button. The name of the selected effect flashes. 5. Press the ON/OFF button. •...

67 Using the Full Range of Featur es E Using the Multi-Image Screen The multi-image screen captures moving subjects in 4, 9 or 16 sequences of still images with the Image Capture feature and displays them at one time. Sound will be recorded normally. This feature can be used in CAMERA and PLAY (VCR)...

68 Using the Full Range of Featur es Capturing 10.Press the ON/OFF button. • MANUAL: Images will be captured each time you press the ON/OFF button. The blue frame indicating the next sequence disappears after the last image. To cancel the last captured image, press and hold the ON/OFF button. To can...

69 Using the Full Range of Featur es E Turning Off the Image Stabilizer The image stabilizer allows you to obtain steady recordings even at telephoto. There is no need to turn off the image stabilizer during normal recording. However, the camcorder tries to compensate for horizontal movements and yo...

70 Using the Full Range of Featur es E Recording With the Self-Timer 1. Press the (self-timer) button. “ ” appears. When recording movies 2. Press the start/stop button. The camcorder starts recording after a 10-second countdown (2 seconds when using the wireless controller). The count down appears ...

71 Using the Full Range of Featur es E Audio Recording Changing the Audio Mode You can record sound in two audio modes—16-bit and 12-bit. The 12-bit mode records sound on two channels (stereo 1), leaving 2 channels free (stereo 2) for adding new sound later. Select the 16-bit mode for higher sound q...

73 Using the Full Range of Featur es E Using the VL-3 Video Light (Optional) This video light enables you to record brightly in color even in dark places. This VL-3 Video Light attaches to the camcorder’s advanced accessory shoe for cable-free operation and is powered by the camcorder’s power supply...

74 Using the Full Range of Featur es E Using the DM-50 Microphone (Optional) The high sensitive Directional Stereo Microphone DM-50 attaches to the advanced accessory shoe for cable-free operation and is powered by the camcorder’s power supply. Use it for recording or dubbing audio. Refer also to th...

75 Using the Full Range of Featur es E Adjusting the Focus Manually Some subjects may not be suitable for autofocus. In such case, focus manually. Autofocus may not work well on the following subjects: 1. Set the program selector to Q . 2. Adjust the zoom. When you operate the zoom after adjusting t...

76 Using the Full Range of Featur es 5. Press the FOCUS button to return to autofocus. The setting resets to autofocus when you switch the program selector to [ . Infinity Focus Use this function when you wish to focus on faraway subjects such as mountains or fireworks. Press the focus button more t...

77 Using the Full Range of Featur es E Adjusting the AE Shift You can adjust the AE (auto exposure) function to lighten or darken the image. This allows you to compensate for backlit or overexposed scenes. Available Levels: –2 to +2, in 0.25 intervals (excluding –1.75 and +1.75). 1. Set the program ...

78 Using the Full Range of Featur es E Setting the Shutter Speed In the Auto mode, you can adjust the shutter speed manually to make stable shots of fast moving subjects. 1. Set the program selector to Q . 2. Set the program AE mode to the (AUTO) mode. 3. Open the menu and select [CAMERA SET UP]. 4....

80 Using the Full Range of Featur es E Setting the White Balance The camcorder’s auto white balance system adjusts the colors to appear natural for different lighting conditions. However, you can use the preset modes to reproduce colors more accurately, or set a custom white balance to obtain the op...

81 Using the Full Range of Featur es For T (Indoor) or U (Outdoor) Setting: 1. Set the program selector to Q . 2. Open the menu and select [CAMERA SET UP]. 3. Select [WHITE BAL.]. 4. Select T (indoor) or U (outdoor). T or U appears. 5. Close the menu. For Custom White Balance: 1. Set the program sel...

82 Using the Full Range of Featur es E Magnifying the Image The playback image can be magnified by 2 times. 1. Move the zoom lever toward T. • The image is magnified by 2 times. • A frame appears indicating the position of the enlarged part. 2. Move the image. • Turn the selector dial to move the im...

83 Using the Full Range of Featur es E Displaying the Data Code Once date and time are set, the camcorder maintains a data code containing recording date and time and other camera data such as shutter speed and exposure (f-stop). (ZR70 MC/ZR65 MC: Only date and time appear when playing back a memory...

84 Using the Full Range of Featur es Selecting the Date/Time Display Combination Open the menu and select [DISPLAY SET UP]. Select [D/TIME SEL.], set it to[DATE] or [TIME] and close the menu. Selecting the Data Code Display Combination Open the menu and select [DISPLAY SET UP]. Select [DATA CODE], s...

85 Using the Full Range of Featur es E Photo Search/Date Search You can search for a still image recorded anywhere on the tape with the photo search function, or locate the change of the date/time zone with the date search function. 1. Press the SEARCH SELECT button to choose between photo search an...

86 Using the Full Range of Featur es E Returning to a Pre-marked Position If you wish to return to a particular scene later, mark the point with the zero set memory and the tape will stop at that point when you rewind/fast forward the tape. 1. Press the ZERO SET MEMORY button at the point you wish t...

87 Editing E Recording to a VCR or Digital Video Device You can copy your recordings by connecting the camcorder to a VCR or a digital video device. If you connect a digital video device, you can copy recordings with virtually no generation loss in image and sound quality. When connecting a VCR: ❍ M...

88 Editing Connecting a Digital Video Device Refer also to the instruction manual of the digital video device. E Side with an arrow Commercially available DV cable Signal flow

89 Editing E Recording from Analog Video Devices (VCR, TV or Camcorder) You can record videos or TV programs from a VCR or analog camcorder on the tape in the camcorder. ❍ Anomalous signals sent from the connected device may be recorded asanomalous picture (although it may not appear so on the scree...

90 Editing E Recording from Digital Video Devices (DV Dubbing) You can record from other digital video devices equipped with a DV terminal with virtually no loss in picture and sound quality. ❍ When recording from digital video devices, make sure that “AV \ DV” is not displayed on the screen. If “AV...

91 Editing Copyright Signal Certain software tapes are copyright protected. If you attempt to play back such tape, “COPYRIGHT PROTECTED PLAYBACK IS RESTRICTED” appears and you will not be able to view the contents of the tape. If you attempt to record from such tape via the DV terminal, “COPYRIGHT P...

92 Editing E Converting Analog Signals into DigitalSignals (Analog-Digital Converter) By connecting the camcorder to a VCR or 8mm video camcorder, you can convert analog video/audio signals to digital signals and output the digital signals via the DV terminal. The DV terminal serves as output termin...

93 Editing Turning On the Analog-Digital Converter Press the AV \ DV button on the wireless controller. OR Open the menu and select [VCR SET UP]. Select [AV \ DV OUT], set it to [ON] and close the menu. ❍ For normal use, set [AV \ DV OUT] to [OFF] (so that “AV \ DV” does not appear on the screen). I...

96 Editing E Audio Dubbing You can add sound from audio devices (AUDIO IN) or with the built-in or an external microphone (MIC. IN). ❍ Use only tapes recorded in SP mode 12-bit audio sound with this camcorder.Audio dubbing will stop if the tape has a blank section or a section recorded inLP mode, 16...

97 Editing E Using a Microphone ❍ When using the built-in microphone: do not connect any cables to themicrophone terminal or the accessory shoe. ❍ When using an external microphone: Connect it to the microphone terminal. ❍ When using the DM-50 Microphone: Do not connect any cables to the microphone ...

98 Editing E 7. Press the STOP 3 button on the wireless controller to stop dubbing. Audio device: Stop playback. Set the zero set memory at the end of the scene you wish to dub audio. Thecamcorder will automatically stop audio dubbing at that point. Playing Back the Added Sound You can select to pla...

99 Editing E Connecting to a Computer Using a DV (IEEE1394) Cable You can transfer recordings to a computer equipped with a DV (IEEE1394) terminal or IEEE1394 capture board (optional software required). ❍ Do not disconnect the DV cable, or turn off the camcorder or computer whiledata is being transf...

100 Using a Memory Car d ZR65 MC ZR70 MC E Inserting and Removing the Memory Card The chapter Using a Memory Card ( 100-133) refers to functions of the ZR70 MC and ZR65 MC only. You can use SD Memory Cards or a commercially available MultiMediaCards with this camcorder. The SD Memory Card has a prot...

101 Using a Memory Car d ZR65 MC ZR70 MC E Selecting the Image Quality/Size Changing the Still Image Quality You can choose between Superfine, Fine and Normal. Open the menu and select [CARD SET UP]. Select [SI QUALITY], set it to[SUPER FINE] or [NORMAL] and close the menu. Changing the Still Image ...

102 Using a Memory Car d ZR65 MC ZR70 MC E ❍ The indication may not decrease even though a recording has been made, ormay decrease by 2 images at once. ❍ All indicators are displayed in green when a memory card is played back. ❍ The remaining image capacity indicates the number of still images, even...

104 Using a Memory Car d ZR65 MC ZR70 MC E Recording Still Images on a Memory Card You can record still images with the camcorder, from a tape in the camcorder ( 105), or from devices connected via the DV terminal or AV terminal ( 106). ❍ Do not turn off the camcorder, disconnect the power source or...

105 Using a Memory Car d ZR65 MC ZR70 MC Recording from a Tape in the Camcorder You can record images from a tape in the camcorder as still images on a memory card. 1. Set the camcorder to PLAY (VCR) mode. 2. Play back the tape. 3. Press the PHOTO button halfway when the scene you wish to record app...

106 Using a Memory Car d ZR65 MC ZR70 MC E Recording from Other Video Devices You can record images from devices connected via the S-video terminal or AV terminal (analog line-in function), or via the DV terminal as still images on a memory card. When recording via the AV terminal, make sure that “A...

107 Using a Memory Car d ZR65 MC ZR70 MC E Recording Panoramic Images (Stitch Assist Mode) You can shoot a series of overlapping images and merge them into one large panoramic scene using the supplied software (PhotoStitch) on a computer. When Recording in Stitch Assist Mode: PhotoStitch detects the...

109 Using a Memory Car d ZR65 MC ZR70 MC E Recording Motion JPEG Movies on a Memory Card You can record Motion JPEG movies with the camcorder, from a tape in the camcorder ( 110), or from devices connected via the AV terminal (analog line-in) or the DV terminal ( 110). ❍ Do not turn off the camcorde...

111 Using a Memory Car d ZR65 MC ZR70 MC E Playing Back a Memory Card You can play back memory card images on the LCD screen, viewfinder screen, or on a connected TV screen (see Playing Back on a TV Screen ( 41) ). You can display a single image (single image display 111), 6 at one time (index scree...

112 Using a Memory Car d ZR65 MC ZR70 MC E Index Screen 1. In single image display, press the (index screen) button. • Up to 6 images appear. • Movies are displayed with the first scene as a still image indicated by “ ”. 2. Press the CARD +/– button to change the image selection. 3. Move the mark to...

113 Using a Memory Car d ZR65 MC ZR70 MC Card Jump Function You can locate still images/movies without displaying them one by one. The number in the upper right of the screen indicates the image number of the current image by the total number of images. In single image display, press and hold the CA...

114 Using a Memory Car d ZR65 MC ZR70 MC E Protecting Images You can protect important images from accidental erasure during single image display or index screen display. If a memory card is formatted, all images, even protected ones, will be erasedpermanently. ❍ The sample images recorded on the su...

115 Using a Memory Car d ZR65 MC ZR70 MC E Erasing Images You can erase images singly or all at once. Be careful when erasing images. Erased images cannot be recovered. ❍ Protected images cannot be erased. ❍ Movies can only be erased when the first or last scene is displayed as a still image. They c...

116 Using a Memory Car d ZR65 MC ZR70 MC E Selecting Still Images for Printing (Print Order) You can select still images for printing and set the number of copies. These print order settings are compatible with the Digital Print Order Format (DPOF) standards. ❍ Make sure to insert a memory card that...

117 Using a Memory Car d ZR65 MC ZR70 MC Erasing All Print Orders 1. In single image display, open the menu and select [CARD OPERATIONS]. 2. Select [ PRINT ORDERS ALL ERASE]. “ERASE ALL PRINT ORDERS?”, [NO] and [YES] appears. 3. Select [YES]. All “ ” disappear. 4. Select [ b RETURN] to close the men...

118 Using a Memory Car d ZR65 MC ZR70 MC E Printing with the Direct Print Function You can print still images by connecting the camcorder to a Canon Bubble Jet Printer with Direct Print function. The Direct Print function can also be used with the print order settings ( 116). ❍ Observe the following...

119 Using a Memory Car d ZR65 MC ZR70 MC E Printing 1. In single image display, select the still image you wish to print and press the selector dial. The print setting menu appears. 2. Set the number of copies and the print style. • Selecting the Number of Copies . • Setting the Print Style . 3. Sel...

120 Using a Memory Car d ZR65 MC ZR70 MC E Selecting the paper size: 1. In the print setting menu, turn the selector dial to select [Style] and press the selector dial. 2. Make sure that is selected and press the selector dial. 3. Turn the selector dial to select the paper size and press the selecto...

121 Using a Memory Car d ZR65 MC ZR70 MC E Printing with Print Order Settings You can print still images you have selected with the Print Order function. If you wish to print more than 1 copy, set the number of copies in the print order ( 116). 1. Connect the printer to the camcorder ( 118). 2. Pres...

122 Using a Memory Car d ZR65 MC ZR70 MC E Combining Images (Card Mix) You can produce effects not possible with just a tape with the Card Mix function. Choose one of the sample images provided on the supplied SD Memory Card (such as picture frames, backgrounds and animations) and combine it with th...

124 Using a Memory Car d ZR65 MC ZR70 MC E Selecting the Card Mix Effect 1. Set the program selector to Q . 2. Open the menu and select [ \ CARD MIX]. The card mix menu appears. 3. Select the image you wish to combine with the CARD +/– button. 4. Select [MIX TYPE]. [CARD CHROMA], [CARD LUMI.], [CAM....

125 Using a Memory Car d ZR65 MC ZR70 MC Recording with the Card Mix Effect Movie: 1. Press the start/stop button to begin recording. The combined image is recorded on the tape. 2. Press the start/stop button to end recording. Still Image: 1. Press the PHOTO button halfway. F flashes in white and tu...

126 Using a Memory Car d ZR65 MC ZR70 MC E Copying Still Images You can copy still images from tape to memory card, or from memory card to tape. ❍ All still images from the selected still image onward will be copied. ❍ The image size of a still image copied from tape to memory card will be 640 × 480...

127 Using a Memory Car d ZR65 MC ZR70 MC Copying Still Images from Memory Card to Tape Load a cassette with enough free space, and insert a recorded memory card. Make sure that the protect tab on the cassette is set to allow recording. 1. Select the first still image you wish to copy with the CARD +...

128 Using a Memory Car d ZR65 MC ZR70 MC E Formatting a Memory Card Format new memory cards, or when you get the message “CARD ERROR”. You can also format a memory card to erase all images recorded on it. The camcorder formats memory cards in the Design rule for Camera File system (DCF) standard. ❍ ...

129 Using a Memory Car d ZR65 MC ZR70 MC E Connecting to a Computer Using a USB Cable You can download images from the memory card to a computer using the supplied USB cable. With the supplied software, you can easily download, browse and archive images, and arrange still images for printout. For in...

130 Using a Memory Car d ZR65 MC ZR70 MC E Creating a Start-up Image You can create a start-up image using a still image on the memory card or a sample start-up image provided on the DIGITAL VIDEO SOLUTION DISK and save it as [MY IMAGE]. ❍ Make sure to insert a memory card with enough remaining capa...

131 Using a Memory Car d ZR65 MC ZR70 MC E Memory Card Information Images recorded on a memory card with this camcorder can be transferred to a computer using the following products for SD Memory Cards or MultiMediaCards: PC Card Adapter: An adapter to insert a memory card into the card slot on the ...

132 Using a Memory Car d ZR65 MC ZR70 MC Sample Images 27 sample images are pre-recorded on the supplied SD Memory Card: 8 card chroma key images, 5 card luminance key images, 2 camera chroma key images and 12 card animation images. Card Chroma Key Card Luminance Key Camera Chroma Key Card Animation...

134 Additional Information E Screen Displays LCD Screen Displays You can hide the displays on the LCD screen to have a clear screen for playback. Open the menu and select [DISPLAY SET UP]. Select [DISPLAYS], set it to[OFF <PLAYBK>] and close the menu. • The LCD screen will become completely bl...

135 Additional Information Screen Displays during Basic Recording/Playback indicates flashing. CAMERA mode (battery pack attached): • Remote sensor mode and audio mode disappear after 4 seconds. PLAY (VCR) mode: • Remote sensor mode and volume bar disappear after 4 seconds. E : Backup battery ( 19) ...

136 Additional Information E Screen Displays during Advanced Recording/Playback CAMERA Mode * ZR70 MC 1/100 CARD MIX FADE–T 12bit 16:9 1sec PHOTO WS ON 12:00 PM JAN.1,2003 T W P S AE MF 0 + – Zoom ( 30) Recording mode ( 54) Self-timer ( 70)Headphones ( 39) Wind screen ( 71) 16:9 mode ( 52)Photo mode...

137 Additional Information E CARD CAMERA Mode * ZR70 MC ZR65 MC ZR70 MC 50 1024 320 1/100 1 2 CLOSE 12:00 PM JAN.1,2003 T W 0 AE MF S.FINE Accessory attached tothe Advanced Accessory shoe* ( 73) Still image quality ( 101) Movie size* ( 102) Still image size ( 101) Self-timer ( 70) Stitch assist ( 10...

138 Additional Information E List of Messages Message Explanation You have not set the time zone, date and time. This message appears each time you turn the power on until you set the time zone, date and time. Battery pack is exhausted. Replace or charge the battery pack. Cassette is protected. Repl...

139 Additional Information E Message Explanation Memory card not is inserted into the camcorder. SD Memory Card is set for erasure prevention. Replace the card or change the position of the protect switch. No images are recorded on the memory card. A memory card error occurred. The camcorder cannot ...

140 Additional Information E Direct Print Related Messages ZR65 MC ZR70 MC Message Explanation Paper cassette is not correctly inserted or is out of paper. The paper jammed during printing. The ink cartridge is not inserted or is out of ink. The printer is experiencing a data transmission error. You...

141 Additional Information E Maintenance Camcorder Handling Precautions ❍ Do not carry the camcorder by the LCD panel or viewfinder. ❍ Do not leave the camcorder in places subject to high temperatures, such as a sun- heated car, and high humidity. ❍ Do not use the camcorder in places subject to magn...

142 Additional Information ❍ At cold temperatures, the screen may be darker than usual. This is not a malfunction. The screen returns to normal when the camcorder warms up. Viewfinder ❍ Rotate the viewfinder upward. Remove the protect cover and clean the glass with a cotton swab. Reattach the protec...

143 Additional Information E Condensation Moving the camcorder rapidly between hot and cold temperature may cause condensation (water droplets) to form on its internal surfaces. Stop using the camcorder if condensation is detected. Continued use may damage the camcorder. Condensation may form in the...

144 Additional Information E Using the Camcorder Abroad Power Sources You can use the compact power adapter to operate the camcorder and to charge battery packs in any country with power supply between 100 and 240 V AC, 50/60 Hz. Consult the Canon Service Center for information on plug adapters for ...

145 Additional Information E Troubleshooting If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. Power Source Recording/Playback Problem Cause Solution Battery pack is exhausted. Battery pack is not correctly atta...

146 Additional Information Recording Playback E Problem Cause Solution Camcorder is not set to CAMERA mode. Time zone, date and time are not set, or the backup battery is exhausted. Camcorder is turned off. Cassette is not loaded. Tape reached the end (flashes on the screen). Cassette is protected (...

147 Additional Information E Memory Card Operation ZR65 MC ZR70 MC Problem Cause Solution Memory card was not facing the correct direction. Memory card is full. Memory card is not formatted. Memory card is not inserted. File number reached maximum value. SD Memory Card is protected. Camcorder is not...

148 Additional Information E System Diagram (Availability differs from area to area) MultiMediaCard IFC-300PCUUSB Cable Bubble Jet Printer with direct print function PC Card Adapter USB Reader/Writer FD Adapter BP-900 Series Battery Pack* VL-10LiBattery Video Light Stereo Microphone (commerciallyava...

149 Additional Information E Optional Accessories Call or visit your local retailer/dealer for genuine Canon video accessories. You can also obtain genuine accessories for your Canon camcorder by calling: 1-800-828-4040, Canon U.S.A. Information Center. BP-500 Series Battery Packs When you need extr...

150 Additional Information E WD-30.5 Wide-converter This lens decreases focal length by a factor of 0.7, giving you a wide perspective for indoor shots or panoramic views. FS-30.5U Filter Set Neutral density and MC protector filters help you to control difficult lighting conditions. VL-10Li Battery ...

151 Additional Information E SC-1000 Soft Carrying Case A handy camcorder bag with padded compartments and plenty of space for accessories. SC-A50 Soft Carrying Case This lightweight bag keeps the camcorder within easy reach without weighing you down or getting in the way. This mark identifies genui...

152 Additional Information E Specifications ZR70 MC/ZR65 MC/ZR60 7.4 V DC 2.9 W (Using viewfinder), 3.8 W (Using LCD screen) EIA standard (525 lines, 60 fields) NTSC color signal 2 rotary heads, helical scanning DV system (Consumer digital VCR SD system); Digital component recording PCM digital soun...

153 Additional Information E Weight and dimensions are approximate. Errors and omissions excepted. Subject to change without notice. SDC-8M SD Memory Card 8 MB SD Memory Card standard 32 – 104˚F (0 – 40˚C) 1.3 × 0.94 × 0.08 in. (32 × 24 × 2.1 mm) 0.07 oz. (2 g) Capacity: Interface: Operating tempera...

154 Additional Information E Index 12bit audio . . . . . . . . . . . . . . . . . . 9816:9 wide screen . . . . . . . . . . . . . . 526-second auto date . . . . . . . . . . . . 84 Abroad, using the camcorder . . . 144Accessories. . . . . . . . . . . . . . . . 9, 149Accessory shoe . . . . . . . . . . ....

156 Additional Information E CANON ® ZR70 MC/ZR65 MC/ZR60 DIGITAL VIDEO CAMCORDER LIMITED WARRANTY The limited warranty set forth below is given by Canon U.S.A., Inc. (“CUSA”) with respect to each Canon ZR70 MC/ZR65 MC/ZR60 Digital Video Camcorder (“DV Camcorder”) purchased and used in the United St...

157 Additional Information E CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITED WARRANTY The limited warranty set forth below is given by Canon Canada Inc. (“Canon Canada”) with respect to Canon digital video equipment purchasedin Canada. This limited warranty is only effective upon presentation of a bi...