Page 2 - Introduction; Important Usage Instructions
Introduction 2 E WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Important Usage Instructions Digital Video Camcorder, ZR25 MC and Compact Power Adapter, CA-560 This device complies with Part 15 of the FCC Rules. Operation is subject to the foll...
Page 3 - IMPORTANT SAFETY INSTRUCTIONS
Introduction 3 E IMPORTANT SAFETY INSTRUCTIONS In these safety instructions the word“product” refers to the Canon Digital VideoCamcorder ZR25 MC and all its accessories. 1. Read Instructions — All the safety andoperating instructions should be readbefore the product is operated. 2. Retain Instructio...
Page 5 - Contents
Important Usage Instructions ....................2 IMPORTANT SAFETY INSTRUCTIONS ..................................3 Thank you for Choosing a Canon ..............7 Introducing the ZR25 MC ..........................8 Finding Your Way Around the ZR25 MC ..9 ~ Preparations ... ~ Powering Your Camcorder...
Page 6 - For quick reference; Using a Memory Card
In addition to the contents andindex please refer to: • Finding Your Way Around the ZR25 MC ( 9) • Screen displays ( 132) • Troubleshooting — in case you run into any problems ( 124) • Menu at Glance ( 143) Symbols used in this instructionmanual: : Reference page numbers: Functions that can be opera...
Page 7 - Thank you for Choosing a Canon; Getting started
To get started we suggest that youmaster the basic operations of thecamcorder first, before moving on touse its full range of features. Introduction 7 E Thank you for Choosing a Canon Your camcorder is supplied with thefollowing accessories: WL-D74 WirelessController Two AA batteries SS-600 Shoulder...
Page 8 - Introducing the ZR25 MC; From wide-angle to 10
Lets you record vivid, virtually blur-free still images of moving subjectsonto a memory card. Introduction 8 E Stabilizes yourrecordings even in longtelephoto shots. Introducing the ZR25 MC Using a DV cable,connect the ZR25 MC toa PC equipped with a DVterminal and transfer youroriginal images to you...
Page 9 - Finding Your Way Around the ZR25 MC
9 E Mastering the Basics Finding Your Way Around the ZR25 MC EasyRecording ProgramAE Program selector (p. 54) DC IN 9.5V CHARGE MENU button (p. 38) LCD screen (p. 24) FOCUS button (p. 70)/ (play/pause) button (p. 27) AE SHIFT button (p. 67)/ (stop) button (p. 27) BATT. (battery) RELEASE button (p. 1...
Page 12 - Powering Your Camcorder; Provide power from an AC outlet; or; Charge a battery pack; move the adapter away from the TV or the antenna cable.; Connecting the camcorder to an AC outlet; Connect the power adapter to the camcorder’s DC IN terminal.
12 E Mastering the Basics Powering Your Camcorder Before operating your camcorder, you will need to use the power adapter to: Provide power from an AC outlet or Charge a battery pack Notes: • The power adapter converts current from a household power socket (100–240 V AC, 50/60 Hz) to the DC current ...
Page 13 - Attaching and charging the battery packs
13 E Mastering the Basics Attaching and charging the battery packs Your battery pack was partially charged before it left the factory. It should haveenough power for you to check that your camcorder is working properly.However, you must charge the battery pack fully if you want it to power thecamcor...
Page 14 - When charging is complete, disconnect the power adapter from the; 17). These notes include charging and recording times and how; CA-560 Compact Power Adapter
14 E Mastering the Basics 5. When charging is complete, disconnect the power adapter from the camcorder. Unplug the power cable from the AC outlet, thendisconnect it from the adapter. 6. Remove the battery pack after use. • Rotate the viewfinder upwards.• Press and hold the BATT. RELEASE button whil...
Page 15 - Charge the BP-500 Series battery packs with power from your car; car’s cigarette; Time required for full charge
15 E Mastering the Basics CHARGE The Compact Power Adapter CA-560 included with the camcorder can be usedalong with the CR-560 Kit for 3 different ways to power the camcorder or chargebattery packs:1. Charge the BP-500 Series battery packs with power from your car battery.2. Operate the camcorder wi...
Page 16 - Charge the BP-500 Series battery packs from a household AC; Operate the camcorder with power from your car battery.; car’s
16 E Mastering the Basics 3. Charge the BP-500 Series battery packs from a household AC outlet. 1 or 2 battery pack(s) + Charge Adapter + Compact Power Adapter CHARGE 2. Operate the camcorder with power from your car battery. Camcorder + DC Cable + Charge Adapter + Car Battery Cable → car’s cigarett...
Page 17 - Loading a Cassette; Make sure that you have attached a power source.; Loading and unloading
17 E Mastering the Basics Loading a Cassette 1. Make sure that you have attached a power source. 2. Slide the OPEN / EJECT 5 switch (on the bottom of the camcorder) to release the cassette compartment cover. • Pull the cover fully open (while holding the button) and wait a couple of seconds for the ...
Page 18 - Protecting tapes from accidental erasure; mark flashes in the display.; Cassette memory; damage the camcorder.; Handling cassettes
18 E Mastering the Basics Protecting tapes from accidental erasure To protect your recording from accidental erasure, slide the tab on the cassette sothat it exposes the hole. (This switch position is usually labeled SAVE or ERASEOFF.)If you load this cassette and put the camcorder in record pause m...
Page 19 - Basic Recording; • Removed the lens cap (; Before you start recording; • If you haven’t set the date and time display, SET THE TIME ZONE, DATE
19 E Mastering the Basics Basic Recording Have you completed the following steps?• Attached a power source ( 12). • Removed the lens cap ( 115) and fastened the shoulder strap ( 116). • Chosen the display: viewfinder ( 115) or LCD screen ( 24) Notes: • When you’re using the viewfinder, fully close t...
Page 20 - Slide the program selector to; simply point and shoot without making any manual adjustments (; Press and release the start/stop button once to begin recording.; the upper right corner until it clicks securely closed.; When you have finished recording
20 E Mastering the Basics 4. Slide the program selector to [ . • This selects the camcorder’s Easy Recording program. It allows you to simply point and shoot without making any manual adjustments ( 56). 5. Press and release the start/stop button once to begin recording. • For still image recording t...
Page 21 - during playback and the time code may not be written correctly.
21 E Mastering the Basics You can record and play back a tape in SP (standard play) and LP (long play)modes. LP extends tape usage by 1.5 times. Changing the recording mode (SP/LP) REC MODE••••SP VCR SET UP ( 37) You can’t add sound (audio dubbing) or images (AV insert) to a tape that hasbeen record...
Page 22 - Confirmation/Warning beeps; in the
22 E Mastering the Basics Confirmation/Warning beeps The camcorder’s short operation confirmation beeps are indicated by ` in the illustrations. Beeps sound upon certain camcorder operations such as when youturn the camcorder on, during the self-timer countdown, right before thecamcorder’s automatic...
Page 23 - digital zoom; Zooming; optical zoom
23 E Mastering the Basics 200 × digital zoom Card 40 × Magnifies the camcorder’s zoom range by up to 20 × (up to 4 × when using a memory card).The zoom control continues to work as usual. You can freely zoom in and outbetween 1 × and 200 × magnification — the camcorder automatically switches between...
Page 24 - Using the LCD Screen; Opening and closing the LCD screen
24 E Mastering the Basics Using the LCD Screen Slide the LCD panel OPEN button andopen the panel by pulling it away fromthe camcorder. This automaticallyswitches the LCD screen on and theviewfinder off. When you close theLCD panel, press the upper corneruntil it clicks closed. The LCD screenautomati...
Page 25 - it flat against the side of the camcorder.; Adjusting the LCD screen; You can adjust the brightness of the LCD screen.; About the LCD Screen
25 E Mastering the Basics Notes: • Avoid touching the LCD screen when moving the LCD panel.• Do not hold the camcorder by the LCD panel or the viewfinder.• Make sure you open the LCD panel at 90°, before attempting to rotate it.• Always rotate the LCD panel vertically into place, before closing it o...
Page 26 - • These and all other indicators appear normally in the viewfinder.; Allowing the subject to monitor recording; • You can choose the display style,
26 E Mastering the Basics REC REC PAUSE EJECT • These and all other indicators appear normally in the viewfinder. Allowing the subject to monitor recording When you turn the LCD panel so that itfaces the same direction as the lens,you can watch yourself duringrecording or let your subject monitorrec...
Page 27 - Playing Back a Cassette; Attach a power source and turn the POWER switch to PLAY; • The power indicator lights up green.
27 E Mastering the Basics Playing Back a Cassette You can use the LCD screen for instant, on-the-spot playback. The camcorder alsoplays back the sound track via the built-in speaker ( 30). • When you play back a tape, you can also close the LCD panel with its screen side facing up. • When you’re usi...
Page 28 - ae; Special playback; Other playback modes
28 E Mastering the Basics Frame Advance To play back frame by frame, press the+/ ae button repeatedly during playback pause.Press and hold to play back continuousframe advance. Frame Reverse To play back in reverse frame by frame,press the –/ 4a button repeatedly during playback pause.Press and hold...
Page 30 - Using the headphones; of the AV/headphones terminal through the menu (
30 E Mastering the Basics Built-in speaker The camcorder has a built-in speaker so you can review the sound track alongsidethe picture during tape playback. The built-in speaker is monaural. Adjust the speaker volume by turning the selector dial.• Turn the selector dial up to increase the volume, an...
Page 31 - Connections for Playback on a TV Screen; Power off all devices before starting the connections.; Switching the AV/headphone terminal
31 E Mastering the Basics AV/PHONES•••AV VCR SET UP Connections for Playback on a TV Screen You can connect the camcorder to a TV or VCR in order to play back yourrecordings. You will need to attach a power source to the camcorder ( 12). Power off all devices before starting the connections. See you...
Page 32 - AUDIO terminal
32 E Mastering the Basics When connecting for playback on a TV screen, make sure the AV/headphoneterminal is switched to AV. If PHONES appears in the display, switch the terminal.• Use the S-150 S-video Cable to connect the S-video terminals. Use the STV-250N Stereo Video Cable to connect the AUDIO ...
Page 33 - white plug to the white audio terminal; television to VIDEO.
33 E Mastering the Basics If your TV (or VCR) has audio/video input terminals VIDEO INPUT AUDIO L R IN/OUT MIC AV When connecting for playback on a TV screen, make sure the AV/headphoneterminal is switched to AV. If PHONES appears in the display, switch the terminal.• Connect the camcorder using the...
Page 34 - Tips for Making Better Videos; Composition; • Make sure that the fastening screw of the tripod is no; Holding the camcorder
34 E Mastering the Basics Tips for Making Better Videos Composition The most important element in the scene does not have tobe in the center. For a more interesting picture, try toposition your subject so it is slightly to one side. Leavesome space on the side of the frame that the subject isfacing ...
Page 35 - Picture angle
35 E Mastering the Basics Picture angle Camcorder moves Close-up Instead of zooming while recording, tryto choose your picture angle before youbegin. A good way to tell a story withvideo is to begin with a long shot thatestablishes the situation, and then movein with medium shots and close-ups tosho...
Page 36 - Turning the Image Stabilizer Off; • The
36 E Using the Full Range of Features Turning the Image Stabilizer Off MENU With most camcorders, even the slightest hand movements will be noticeableduring telephoto recording. However, the ZR25 MC’s image stabilizer allows youto obtain steady recordings even at high magnification. To turn the imag...
Page 37 - Using the Menus; Camera menu; VCR MENU
37 E Using the Full Range of Features Using the Menus Many of the camcorder’s advanced functions are selected from menus whichappear in the display. There are 4 main menus:CAM. MENU Camera menu ( 39) VCR MENU VCR menu ( 40) C.CAM. MENU Card camera menu ( 42) C.PLAY MENU Card play menu ( 43) 2 CAM. M...
Page 38 - Selecting from the Menus
38 E Using the Full Range of Features Selecting from the Menus 1. Turn the POWER switch and the TAPE/CARD switch to the desired settings. 2. Press the MENU button to open the menu. • One of the main menus appears, according to the settings of the TAPE/CARD switch and the POWER switch. 3. Turn the se...
Page 39 - Card mix submenu; Camera set up submenu; List of Menus
39 E Using the Full Range of Features CAM.MENU SEL.SETSET MENUCLOSE CARD MIX CAM.SET UP VCR SET UP DISP.SET UP SYSTEM RETURN 135 246 CARD MIX 100-0001 43/50 MIX TYPE••••CARD CHROMA MIX LEVEL••• q w – + 1 To card mix submenu 2 To camera set up submenu 3 To VCR set up submenu 4 To display set up subme...
Page 40 - Display set up submenu; VCR set up submenu
CAM. MENU, cont. 40 E Using the Full Range of Features VCR MENU SEL.SETSET MENUCLOSE VCR SET UP CARD SET UP CARD OPER. DISP.SET UP SYSTEM RETURN 135 246 DISP.SET UP SEL.SETSET MENUCLOSE BRIGHTNESS•• MIRROR••••••ON TV SCREEN•••ON D/T DISPLAY•OFF RETURN – + !4!6!8 !5!7 SYSTEM SEL.SETSET MENUCLOSE WL.R...
Page 41 - Card set up submenu; Return; Card operations submenu; Copy from cassette to card .; Return
41 E Using the Full Range of Features VCR SET UP SEL.SETSET MENUCLOSE REC MODE••••SP OUTPUT CH•••L/R AUDIO DUB.••AUDIO IN WIND SCREEN•––– AUDIO MODE••12bit AV/PHONES•••AV RETURN qetu wry CARD OPER. SEL.SETSET MENUCLOSE COPY RETURN [ ] !1 !2 1 VCR set up submenu q Record mode ...........................
Page 42 - System submenu
CAM.SET UP SEL.SETSET MENUCLOSE SHUTTER•••••AUTO D.ZOOM••••••40 × IMAGE S. •ON WHITE BAL.••AUTO RETURN qet wr CARD SET UP SEL.SETSET MENUCLOSE QUALITY•••••FINE FILE NOS.•••CONTINUOUS RETURN yi u VCR MENU, cont. 42 E Using the Full Range of Features SYSTEM SEL.SETSET MENUCLOSE WL.REMOTE••• 1 BEEP••••...
Page 44 - Copy from card to cassette .
44 E Using the Full Range of Features SYSTEM SEL.SETSET MENUCLOSE WL.REMOTE••• 1 BEEP••••••••ON RETURN !4!6 !5 DISP.SET UP SEL.SETSET MENUCLOSE BRIGHTNESS•• DISPLAYS••••ON D/TIME SEL.•DATE & TIME RETURN – + !0!2 !1!3 1 Card operations submenu q To image protect ................. 102 w To print m...
Page 45 - Using the Wireless Controller; Inserting batteries
45 E Using the Full Range of Features Using the Wireless Controller The supplied wireless controller canoperate the camcorder from a distanceof up to 16 feet (5 m). Point it at thecamcorder’s remote sensor while youpress the buttons. There are some functions that cannot beoperated without the wirele...
Page 46 - When Operating 2 Canon DV Camcorders (Remote Sensor Mode); To turn the remote sensor off:; Open the menu and select SYSTEM. Then select WL.REMOTE, set it to OFF; appears in the display.; Open the menu and select SYSTEM. Then select WL.REMOTE, set it to; • The selected mode will appear on the display for 4 seconds.; Press and hold the REMOTE SET button on the wireless controller.; OFF
46 E Using the Full Range of Features To prevent interference from otherCanon wireless controllers being used nearby, there are 2 remote sensormodes and an off setting. The wirelesscontroller and the camcorder have to beset to the same mode in order to becompatible. When Operating 2 Canon DV Camcord...
Page 47 - If your wireless controller isn’t working:
47 E Using the Full Range of Features If your wireless controller isn’t working: Make sure the camcorder and the wireless controller are both set to the samemode. Check the mode the camcorder is set to by pushing any button other thanthe REMOTE SET button on the wireless controller. The camcorder’s ...
Page 48 - Setting the Date and Time; Setting the time zone/daylight saving time; • If you are now in daylight saving time, select the time zone with the
48 E Using the Full Range of Features Setting the Date and Time The date and/or time display forms part of the data code. You can choose todisplay or hide it during playback ( 73). Set the date and time display when you first start using your camcorder. Install thebackup battery before you begin ( 1...
Page 50 - • The year display starts to flash.; Turn the selector dial up and down to change the year. Press the; and time again from the start.; Setting the clock; Date and time display
50 E Using the Full Range of Features 1. Open the menu and select SYSTEM. 2. Select D/TIME SET. • The year display starts to flash. 3. Turn the selector dial up and down to change the year. Press the dial in to move to another part of the display. • Once you move from the year, the next part of the ...
Page 51 - Taking Still Pictures to a Cassette; 08) for transfer to a PC for; Press the PHOTO button halfway down and hold it:; flashes white in the display as the camcorder adjusts the
51 E Using the Full Range of Features Taking Still Pictures to a Cassette You can record still pictures like a photograph. The camcorder records the pictureand sound to tape for several seconds. The exposure is automatically adjusted.Copy still photos automatically to a memory card ( 108) for transf...
Page 52 - Press the PHOTO button fully down to take the still picture.
52 E Using the Full Range of Features • If the subject is unsuitable for autofocus ( 125), the camcorder may not be able to focus, and F may continue to flash white in the display. Continue to hold the PHOTO button halfway down, then press the FOCUS button andadjust the focus manually with the selec...
Page 53 - Searching and Reviewing While Recording; to record pause mode.; Record search; • The + button plays the recording forwards and the – button plays it
53 E Using the Full Range of Features Searching and Reviewing While Recording When the camcorder is in record pause mode, you can use record review to playback the last few seconds of your recording and then return automatically torecord pause mode. You can quickly make sure that a scene has recorde...
Page 54 - Using the Various Recording Programs; the program selector to the; Availability of functions in each recording program
54 E Using the Full Range of Features Using the Various Recording Programs P The camcorder provides you with a choice of 7 recording programs. They usedifferent combinations of camcorder settings in order to adjust the exposure andother functions to match the recording situation.• For simple point-a...
Page 55 - Setting the program AE mode; • The program will appear in the display.
55 E Using the Full Range of Features Setting the program AE mode 1. Slide the program selector to Q (program AE) mode. 2. Press the selector dial in to display the program menu. 3. Turn the selector dial to move the arrow up or down the display. 4. Press the selector dial in to select the desired p...
Page 56 - Portrait; Easy Recording; Auto
56 E Using the Full Range of Features Portrait Use this program outdoors to make subjectsstand out from a softened foreground andbackground. It works well for still-lifes andclose-ups. The effect is most noticeable whenthe zoom position is between the middle rangeand the telephoto end. Focus manuall...
Page 57 - Spotlight; Low Light
57 E Using the Full Range of Features Use this program in places where thebackground is so bright that the subject appearsunderexposed in the display — a sunny beach orski resort, for example. You may notice someshudder when recording moving subjects. Sand & Snow Spotlight This program is design...
Page 58 - Using Digital Effects; Availability of digital effects by mode
58 E Using the Full Range of Features Using Digital Effects • The types of digital effects you are able to use depends on the setting of the TAPE/CARD switch, the POWER switch and the recording program. Use the camcorder’s digital effects for more interesting productions. • Faders: Start or end scen...
Page 59 - Horizontal Wipe (WIPE; Faders; When you end
59 E Using the Full Range of Features Fade Trigger (FADE-T) Vertical Wipe (WIPE ) Horizontal Wipe (WIPE ) When you start recording, the picturebegins as a thin vertical line in thecenter of the screen which gradually expands sideways until it fills the whole of the screen. When you end a scene, the ...
Page 60 - Effects; Black and White
60 E Using the Full Range of Features Effects Art (ART) Adds a paint-like effect,calledsolarization, tothe image. Sepia (SEPIA) Makes amonochromeimage with abrownish tint. Black and White (BLK & WHT) Makes theimage black andwhite. Mosaic (MOSAIC) Blurs the image byenlarging the sizeof some pixel...
Page 61 - buttons on the wireless controller; Operating faders; settings appear. M.FADE also appears in TAPE; Press the DIGITAL EFFECTS button to close the menu.; • The name of your selected fader flashes in the display.
61 E Using the Full Range of Features Digital effects can be set with the controls on the body of the camcorder or thewireless controller. Pressing the ▲ / ▼ buttons on the wireless controller correspond to turning the selector dial up and down, and pressing the SET buttoncorresponds to pressing the...
Page 62 - Press the DIGITAL EFFECTS button to open the digital effects; • You return to the digital effects menu.; Select effect; Operating effects; If you’re in TAPE CAMERA mode:
62 E Using the Full Range of Features Sound records/plays back normally.When operating effects in TAPE CAMERA or CARD CAMERA mode, makesure the program selector is set to Q . 1. Press the DIGITAL EFFECTS button to open the digital effects menu. • D.EFFECT | , FADER and EFFECT appear. 2. Select EFFEC...
Page 63 - Audio Recording; To switch to the 16; • “16 bit” is shown in the display for approximately 4 seconds.; Selecting the audio mode; External microphone
63 E Using the Full Range of Features Audio Recording To switch to the 16 - bit mode, open the menu and select VCR SET UP. Then select AUDIO MODE, set it to “16 bit” and close the menu. • “16 bit” is shown in the display for approximately 4 seconds. Notes: • For details on adding new sound, see p. 8...
Page 64 - • WS; Wind screen; terminal to headphones (
64 E Using the Full Range of Features To turn it on, open the menu and select VCR SET UP. Then select WINDSCREEN, set it to ON and close the menu. • WS O is shown in the display when you turn the wind screen on. Notes: • The wind screen can be used for audio dubbing with the built-in microphone as w...
Page 65 - self-timer button on the body of the camcorder; the SELF TIMER button on the wireless controller.; Setting the Self-Timer
65 E Using the Full Range of Features This is useful when you want to include yourself in the picture when recordingmovies or still photographs. 1. Press the self-timer button on the body of the camcorder or the SELF TIMER button on the wireless controller. • SELF-T appears in the display.• To have ...
Page 66 - • To cancel the self-timer before the countdown has begun, press the
66 E Using the Full Range of Features Notes: • To cancel the self-timer before the countdown has begun, press the SELF TIMER button. • To cancel the self-timer once the countdown has begun, press the SELF TIMER button, start/stop if you’re shooting movies, or PHOTO if you’re takinga still image.
Page 67 - Using AE Shift; than Spotlight or Sand & Snow from the program menu.
67 E Using the Full Range of Features Using AE Shift By controlling the level of the automatic exposure (AE) function, you can lightenor darken the image slightly. This allows you to compensate for backlit,overexposed scenes. P AE SHIFT Make sure the program selector is set to Q . 1. Press the selec...
Page 68 - Make sure the camcorder is set to the; Concerning shooting in fluorescent lighting; When the camcorder is set to; TAPE; slower; Setting the Shutter Speed
68 E Using the Full Range of Features 1. Make sure the camcorder is set to the Q (program AE) mode. 2. Press the selector dial in and choose AUTO from the program menu. 3. Open the menu and select CAM.SET UP. 4. Select SHUTTER. 5. Press the selector dial in to select the desired shutter speed. • Onl...
Page 69 - Guidelines for shooting using high shutter speeds
69 E Using the Full Range of Features Guidelines for shooting using high shutter speeds • When shooting with a shutter speed of 1/1000 or higher, do not shoot the sun directly. Recommended shutter speeds when shooting: • People doing outdoor sports such as golf or tennis • Moving cars or trains or o...
Page 70 - Adjusting Focus Manually; Manual focus; Focus lock
70 E Using the Full Range of Features Adjusting Focus Manually REC SEARCH FOCUS AE SHIFT REC SEARCH Manual focus Use the selector dial to set the focus.• Turn the selector dial downward to move the focus farther away. • Turn the selector dial upwards to bring the focus nearer. Notes: • You cannot ad...
Page 71 - Setting the White Balance; appears in the display when you set the white balance to; b) To set the white balance yourself, point the camcorder at a white; you have finished setting the white balance.
71 E Using the Full Range of Features Setting the White Balance 1. Make sure the camcorder is set to the Q (program AE) mode. 2. Open the menu and select CAM.SET UP. 3. Select WHITE BAL. 4. a) For the indoor, outdoor or auto settings, press the selector dial in to choose the setting. • T / U appears...
Page 72 - Subjects with one dominant color, such as sky, sea or forest
72 E Using the Full Range of Features Setting the white balance manually will probably work betterthan auto white balance when shooting: Subjects with one dominant color, such as sky, sea or forest Close-ups In rapidly changing lighting conditions In places lit by certain types of fluorescent or mer...
Page 73 - • Press it once to display, once more to hide it.
73 E Using the Full Range of Features DATA CODE CAMERA OFF PLAY(VCR) POWER MENU During TAPE PLAY (VCR) mode, the data code can be displayed or hidden whilethe camcorder is in play, slow or still mode. Camcorder data may be displayed as “– – –” during fast forward, rewind, reverseplayback, forward an...
Page 74 - Setting the data code; Camera data; • The data code will read “– – –” in the following situations:; Possible data code combinations for cassettes:
74 E Using the Full Range of Features You can also choose to display camcorder data (shutter speed and exposuresettings) in cassette data codes. To change, open the menu and select DISP.SET UP. Then select DATACODE, set it to DATE/TIME, CAMERA DATA or CAM. & D/T and closethe menu. DATA CODE•••DA...
Page 75 - • When 6SEC.DATE is turned on but DISPLAYS (
75 E Using the Full Range of Features Six-second auto date The 6-second auto date appears for 6 seconds to mark the changeover of a day ifthe tape was being recorded at 12:00 midnight. It also appears for 6 seconds whenyou start playback and have the data code turned off. The 6-second auto date will...
Page 76 - Press the SEARCH SELECT button to choose between photo/date
76 E Using the Full Range of Features Searching the Tape (Photo Search/Date Search) This allows you to move quickly through still pictures recorded anywhere on atape (photo search) or between different days or areas of recording (date search)on a tape. 1. Press the SEARCH SELECT button to choose bet...
Page 77 - Returning to a Pre-Marked Position; Press the ZERO SET MEMORY button on the wireless controller; RTN
77 E Using the Full Range of Features Returning to a Pre-Marked Position Use the wireless controller to mark a point on a tape that you want to return tofollowing playback. 1. Press the ZERO SET MEMORY button on the wireless controller during playback at a point you want to return to later. • The ti...
Page 78 - Editing; Editing to a VCR; Preparations
78 E Editing Editing to a VCR 1. Find a point on your recorded cassette slightly before the section you want to copy. 2. Start to play it back while you monitor the picture on the TV. 3. Start recording on the VCR as soon as the section you want to copy appears on the screen. 4. Pause the VCR at the...
Page 79 - Dubbing to/from a Cassette with Digital Video Equipment; Connect the camcorder and the other digital device.; marked with the arrows facing as shown above.; the camcorder’s TAPE/CARD switch to TAPE.; • DV IN appears in the display.
79 E Editing REW PLAY FF REC PAUSE SEARCH SELECT ZERO SET MEMORY AUDIO DUB. STOP AV INSERT PAUSE SLOW + / – / × 2 REC PAUSE (LINE-IN) REC SEARCH FOCUS AE SHIFT REC SEARCH Digital video equipment fitted with the DV terminal lets you edit, copy andtransfer data digitally, with virtually no generation ...
Page 80 - Copyright signal; • The camcorder enters record pause mode.; Start playback on the other digital device while you monitor the; images on the tape that is being recorded to.; Dubbing
80 E Editing Copyright signal Certain pre-recorded software tapes are copyright protected. If you try to playback such a cassette, “COPYRIGHT PROTECTED PLAYBACK ISRESTRICTED” appears in the display for a few seconds and then the camcorderdisplays a blank blue screen; you cannot view the contents of ...
Page 81 - “Connections for Playback on a TV Screen” on p. 31.
81 E Editing OUTPUT VIDEO S(S1)-VIDEO AUDIO L R REC PAUSE (LINE-IN) REC SEARCH FOCUS AE SHIFT REC SEARCH S DV IN/OUT IN/OUT IN/OUT MIC AV Recording from a VCR, TV or Analog Camcorder (Analog Line-in) You can record a video played on your VCR or analog camcorder (for digitalcamcorders, see p. 79) or ...
Page 82 - you want to copy and set it to playback pause mode.; • You can monitor the picture in the viewfinder or LCD.
82 E Editing 1. Find a point on your recorded cassette slightly before the section you want to copy and set it to playback pause mode. 2. Press the REC PAUSE button. • S-video and AV IN/OUT terminals work as input terminals.• The camcorder enters record pause mode. 3. Start playback on the other dev...
Page 83 - Recording Over Existing Scenes (AV Insert Editing); Make sure the AV/headphone terminal is set to AV through the menu (
83 E Editing Recording Over Existing Scenes (AV Insert Editing) OUTPUT VIDEO S(S1)-VIDEO AUDIO L R S DV IN/OUT IN/OUT IN/OUT MIC AV You can insert new scenes from your VCR or other camcorder onto your pre-recorded tape using the ZR25 MC’s analog line-in or DV in terminals. Originalvideo and audio wi...
Page 84 - The tape in the camcorder:; Turn the camcorder’s POWER switch to PLAY (VCR) and load a; Example recording from a VCR
84 E Editing TV: You cannot insert AV from a TV program with anomalous synchronized signals,such as when the program itself received poor signals. The tape in the camcorder: When using the ZR25 MC’s AV insert function, only record to tapes recorded inSP mode with continuously recorded time codes.If ...
Page 86 - Audio Dubbing; To connect other audio equipment:; • Make sure the AV/headphone terminal is set to AV through the menu (; To connect an external microphone:
86 E Editing Audio Dubbing OUTPUT AUDIO L R IN/OUT MIC AV You can add sound to the original sound on a pre-recorded tape from audioproducts (AUDIO IN) or with the internal or external microphone (MIC. IN). Theoriginal sound will not be erased. For best results, add sound to tapes that havebeen recor...
Page 87 - any cables to the MIC terminal.
87 E Editing 1. Open the menu and select VCR SET UP. 2. Select AUDIO DUB. 3. Select AUDIO IN or MIC. IN and close the menu. AUDIO DUB.••AUDIO IN VCR SET UP ( 37) REW PLAY FF REMOTE SET SEARCH SELECT ZERO SET MEMORY AUDIO DUB. STOP AV INSERT PAUSE SLOW + / – / × 2 CAMERA OFF PLAY(VCR) POWER Do not co...
Page 88 - Locate the point where you want to start audio dubbing, then press
88 E Editing 4. Locate the point where you want to start audio dubbing, then press the PAUSE button. • You can use the playback buttons on the body of the camcorder or the special playback functions on the wireless controller in the same way as in playbackmode. • The camcorder becomes set to playbac...
Page 89 - Setting the Audio Mix; • To simply choose STEREO1, STEREO2 or MIX/FIXED, make sure your
89 E Editing Setting the Audio Mix AUDIO MONITOR MIX BALANCE ST-1 ST-2 CAMERA OFF PLAY(VCR) POWER When you play back a tape that was recorded in 12-bit mode, you can set theaudio output to play: stereo 1 (the original sound), stereo 2 (any new sound,dubbed to the tape after recording), or mix the ba...
Page 90 - Open the menu and select VCR SET UP. Then select OUTPUT CH,; Selecting audio output channels
90 E Editing When you play back a tape whose audio has been recorded on multiple channels,you can change the output channels of that sound. + 1. Load a tape recorded with multiple-channel audio. 2. Open the menu and select VCR SET UP. Then select OUTPUT CH, set it to the desired setting and close th...
Page 91 - household power socket using the power adapter.; Connecting to a PC
91 E Editing By using a DV cable and connecting the camcorder to a PC equipped with a DVterminal conforming to IEEE 1394/DV compatible capture board, you can transferimages taken with the camcorder to your PC.• While connected, it is recommended that you power your camcorder from a household power s...
Page 92 - Memory Card Introduction; Front; MultiMediaCard MMC-8M; Back; Important
92 E Using a Memory Card The camcorder can take, store and manage still images on 2 types of memorycards: the MultiMediaCard (supplied with the camcorder) or an SD Memory Card(commercially available). The MultiMediaCard is an ultra-small, ultra-light mediathat can record still images. About the same...
Page 93 - Selecting the recording image quality; Select the quality of a still image to be recorded.; To change the image quality to standard, open; the menu and select; Inserting and removing the memory card; Open the memory card compartment cover in the direction of the; • When you set the camcorder to CARD PLAY (VCR) mode, the last image
93 E Using a Memory Card Selecting the recording image quality Select the quality of a still image to be recorded. QUALITY•••••FINE CARD SET UP ( 37) To change the image quality to standard, open the menu and select CARD SET UP. Then select QUALITY, set it to STANDARD and close themenu. Inserting an...
Page 94 - • The number of images that can still be recorded on a memory card may
94 E Using a Memory Card FINE Approx. 124 KB ...save high quality images, print out, etc. Approx. 60 images Image quality Necessary memory per image Use when you want to... Number of images per 8MB MMC* STANDARD Approx. 70 KB Approx. 105 images * These figures are approximate. The actual number you ...
Page 95 - File numbers; CONTINUOUS
95 E Using a Memory Card File numbers 1 CONTINUOUS Numbering is continuous between cards, so thatthe first file number assigned on a new memorycard is 1 more than the last file number assignedon the previous memory card. When the filenumbers are set to CONTINUOUS, each imagetaken is assigned a diffe...
Page 96 - Recording Still Images to a Memory Card; Press the small green button on the POWER switch and hold, turn; other information appear in the display.; Press the PHOTO button halfway and hold it.; flashes white in the display as the camcorder adjust the; Press the PHOTO button fully down to record the still picture.; disappears from the display.
96 E Using a Memory Card Recording Still Images to a Memory Card 3 4 1 2 POWER CARD TAPE CAMERA OFF PLAY(VCR) The camcorder’s Progressive Photo function lets you take vivid, virtually blur-free still images of moving subjects onto a memory card. You can also recordonto a memory card images from a ta...
Page 97 - button before step 3, and then press
97 E Using a Memory Card Notes: • To use the self-timer ( 65), press the button before step 3, and then press the PHOTO button fully down. • The wireless controller’s PHOTO button has no half-way setting. Press the button fully and the camcorder immediately takes the image. • When the POWER switch i...
Page 98 - Recording an Image from a Cassette as a Still Image; When the image you want to record appears in the display, press; still be recorded on the memory card appears in the display.; Press the PHOTO button fully down to record the image to the; image with only 1 full press of the PHOTO button.
98 E Using a Memory Card Recording an Image from a Cassette as a Still Image REC SEARCH FOCUS AE SHIFT REC SEARCH 1 2 3 Record an image from a cassette onto a memory card. To automatically recordmultiple still images from a cassette to a memory card, refer to “Copying StillImages from a Cassette” on...
Page 99 - Recording from Another DV Device as a Still Image; Connect the camcorder to the other digital device.; Load a memory card. Turn the camcorder’s POWER switch to
99 E Using a Memory Card Recording from Another DV Device as a Still Image CAMERA CAMERA OFF PLAY(VCR) POWER CARD TAPE 1. Connect the camcorder to the other digital device. • Connect the Canon CV-150F DV cable (optional) with the sides of the plugs marked with the arrows facing as shown above. 2. Pr...
Page 100 - Viewing Still Images; Do not change the data recorded on a memory card.; Still images whose image file names have been changed on a PC; There are 3 ways to view still images:; One after the other automatically in order of recording; Single Image; • The last image recorded appears in the display.; Search for the desired still image by pressing the CARD +/–; the first image will take you to the last image.
100 E Using a Memory Card Viewing Still Images CARD SLIDE SHOW CARD I N D E X S C R E E N CAMERA CAMERA OFF PLAY(VCR) POWER DIGITALEFFECTS SLIDE SHOW/MIX O N / O F F MENU CARD TAPE Play back and view still images recorded on a memory card. (For details onconnecting to a TV, see “Connections for Play...
Page 101 - Slide Show; With an image in the display, press the SLIDE SHOW button.; • The images play back one after the other for 5 seconds each.; To stop the slide show, press the SLIDE SHOW button.; Index Screen; Up to 6 images appear at once so you can search quickly for an image.; With an image in the display, press the INDEX SCREEN button.; • Up to 6 images appear in the display.; mark to the image you want to view.; to go to the next image.
101 E Using a Memory Card 2 Slide Show With an image in the display, press the SLIDE SHOW button. • The images play back one after the other for 5 seconds each. To stop the slide show, press the SLIDE SHOW button. • The slide show starts or stops each time you press the SLIDE SHOW button.• The slide...
Page 102 - mark to the image you want to protect.
102 E Using a Memory Card Preventing Accidental Erasure (Protect) CARD SLIDE SHOW CARD SLIDE SHOW/MIX Select important images and protect them from accidental erasure. If a memorycard is formatted, however, all images, including protected images, will bepermanently erased ( 111). • The pre-recorded ...
Page 103 - Erasing Still Images
103 E Using a Memory Card Erasing Still Images CARD SLIDE SHOW CARD SLIDE SHOW/MIX Erase images singly or all at once. • You cannot erase protected images. Cancel image protection ( 102) first in order to erase an image. • Erase images with caution. Once an image has been erased it cannot be restore...
Page 104 - IMAGES] NO YES appears in
104 E Using a Memory Card 4. Select ALL. • ERASE ALL IMAGES? [EXCEPT FOR IMAGES] NO YES appears in the display. 5. Select YES. • All images except the protected ones are erased.• If you select NO, you return to step 4. 6. Close the menu. To erase all images on the memory card at once
Page 105 - Combining Images and Recording Them to a Cassette (Card Mix); Select from 3 types of Card Mix effects:
105 E Using a Memory Card Combining Images and Recording Them to a Cassette (Card Mix) Liven up your productions by superimposing one image on top of the other.Combine 2 still images or a still image and a moving image. Choose a still imagefrom the memory card, either one of the pre-recorded sample ...
Page 106 - Make sure the program selector is set to; Open the menu and select; Select; Mix level
106 E Using a Memory Card CAM. CHROMA (Camera chroma key) Superimpose the currently recording image on top of a still image, whichbecomes its background. Shoot the subject of the currently recording imageagainst a blue background, such as a blue curtain. The original still image willappear in place ...
Page 107 - Press the PHOTO button halfway down and hold it.
107 E Using a Memory Card 4. Select the desired setting. • Your currently recording image is combined with the pre-recorded still image. 5. Select MIX LEVEL. 6. Adjust the mix level. • Turning the selector dial upwards adjusts to the right and turning downwards adjusts to the left. 7. Close the menu...
Page 108 - Copying Still Images from a Cassette; Locate the first still image on the cassette that you want to copy; • CANCEL and EXECUTE settings appear.; Press the stop button when your desired images have finished
108 E Using a Memory Card Copying Still Images from a Cassette FOCUS AE SHIFT Copies multiple still images from a tape to the memory card, using the PhotoSearch function.• The still images’ data codes will reflect the date and time the copies are made. Make sure a memory card that has enough memory ...
Page 109 - Copying Memory Card Still Images to a Cassette; Locate the point on the cassette where you want to start copying; copied onto the cassette.; Press the stop button when your desired images have finished
109 E Using a Memory Card Copying Memory Card Still Images to a Cassette CARD SLIDE SHOW/MIX FOCUS AE SHIFT Make sure a memory card that has images recorded on it and a cassette that hasenough recordable space have been inserted into the camcorder. 1. Locate the point on the cassette where you want ...
Page 110 - Marking a Still Image for Printing (Print Mark); Select PRINT MARK
110 E Using a Memory Card Marking a Still Image for Printing (Print Mark) An image on a memory card must be marked before it can be printed. Thecamcorder supports the DPOF (Digital Print Order Format) print format. Images can be automatically printed on a DPOF-supporting Canon printer. Up to50 image...
Page 111 - Formatting a Memory Card; a PC or other device.
111 E Using a Memory Card Formatting a Memory Card Format new memory cards, if you get the message CARD ERROR, or topermanently and quickly erase all the images on a memory card, includingprotected images (this includes the pre-recorded card mix sample images). The MultiMediaCard supplied with this ...
Page 112 - Other Information and Precautions; on most types of laptop PCs.; Memory card operating precautions
112 E Using a Memory Card Other Information and Precautions The camcorder formats memory cards in DCF (Design rule for Camera Filesystem).Images recorded on a memory card with this camcorder can be transferred to aPC with the use of the following products made for MultiMediaCards or SDMemory Cards: ...
Page 113 - Sample images; Card chroma key
113 E Using a Memory Card • Do not leave memory cards in places subject to high temperature or high humidity. • Moving a memory card rapidly between hot and cold temperatures may cause condensation to form on it, leading to malfunctions. Avoid this problem byplacing the memory card in a plastic bag ...
Page 114 - MultiMediaCard standard
114 E Using a Memory Card Card luminance key Camera chroma key MultiMediaCard MMC-8M Specifications Capacity 8 MB Interface MultiMediaCard standard Operating temperature range 32°F– 140°F (0°C – 40°C) Dimensions 32 × 24 × 1.4 mm Weight 1.5 g Weight and dimensions are approximate Errors and omissions...
Page 115 - Preparing the Camcorder; Adjust the viewfinder
115 E Additional Information Preparing the Camcorder • Set the camcorder to TAPE CAMERA mode. Extend the viewfinder straightout, then adjust the viewfinder focusinglever to suit your eyesight. • Rotate the viewfinder to an angle that allows you to view comfortably. Storethe camcorder with the viewfi...
Page 116 - • For extra security and portability, attach; Attach the shoulder strap
116 E Additional Information Be careful not to leave the viewfinder exposed to bright sunlight, or it willmelt. (The light is concentrated by the viewfinder lens.) Adjust the angle of theviewfinder to prevent sunlight from entering. • For extra security and portability, attach the shoulder strap bef...
Page 117 - Notes on Using the Batteries; Charging and recording times
117 E Additional Information Notes on Using the Batteries Charging and recording times • These times vary — the safest policy is always to have 2 or 3 times as many battery packs as you think you will need. • You will get more recording time if you turn the camcorder off between shots, instead of le...
Page 118 - Taking care of the battery pack; Always attach the terminal cover.; • Do not allow any metal objects to; Keep the terminals clean.; When to recharge; • “CHANGE THE BATTERY PACK”; How much power is left?
118 E Additional Information Taking care of the battery pack B D Always attach the terminal cover. • Do not allow any metal objects to touch the terminals, as this can causea short circuit and damage the batterypack. Attach the terminal coverwhenever the battery pack is notbeing used. Keep the termi...
Page 119 - Treat the battery pack with care.; Installing the backup battery; mark flashes in the
119 E Additional Information DANGER! Treat the battery pack with care. • Keep it away from fire (or it might explode).• Do not expose the battery pack to temperatures greater than 140°F (60°C). Do not leave it near a heater, or inside a car in hot weather, for example. • Do not try to disassemble or...
Page 120 - Maintenance; form on the lens and internal parts (; Cautions
120 E Additional Information Maintenance Avoid high temperatures and high humidity. • Do not leave the camcorder inside a car in hot weather, for example.• Be careful of heat radiating from video lighting equipment.• Do not take the camcorder into a humid room. Avoid sudden changes in temperature. •...
Page 121 - Viewfinder
121 E Additional Information Viewfinder • Clean the viewfinder screen. Rotate the viewfinder upwards. Remove theviewfinder protect cover and clean byinserting a cotton swab. When finished,return it flush with the camcorder. • The viewfinder screen scratches easily. Take care when cleaning. LCD • Cle...
Page 122 - Power sources; Using the camcorder abroad; Video heads; • When mosaic-like noise appears on the playback picture,
122 E Additional Information Power sources • You can use the compact power adapter to operate your camcorder and charge battery packs in any country where the electricity supply is between 100 and240 V AC, 50/60 Hz. Contact your Canon dealer for information about plugadapters for overseas use. TV pl...
Page 123 - Condensation; Protecting the camcorder from condensation; When a cold room is heated rapidly
123 E Additional Information Condensation Condensation may form on the camcorder when it is moved from a cold place to awarm place. Using the camcorder while condensation is present can damage boththe tape and the camcorder. Condensation may become a problem: When the camcorder is taken from an air-...
Page 124 - Troubleshooting; Cause and/or what to do about it
124 E Additional Information Troubleshooting Cause and/or what to do about it • The camcorder is not set to the appropriate mode ( 19, 27). • The cassette is not loaded or is set for erasure prevention ( 17-18). • The cassette has reached the end.• The power source is not properly connected, or the ...
Page 126 - Memory card operations
126 E Additional Information • The speaker has been turned off with the selector dial ( 30). • Headphones are being used. ? There’s no sound coming from thespeaker during playback. Memory card operations Cause and/or what to do about it • It is not turned the right way ( 93). Turn it the right way a...
Page 127 - Miscellaneous; Problem
127 E Additional Information Miscellaneous Cause and/or what to do about it • The remote sensor mode is set to OFF B in the menu ( 46). • The remote sensor modes of the wireless controller and the camcorderitself are different ( 46). • The batteries are dead or not inserted. • Check the screen displ...
Page 128 - The ZR25 MC System Diagram
128 E Additional Information The ZR25 MC System Diagram (Availability differs from area to area) MMC-8MMultiMediaCard orSD Memory Card PC Card Reader PC Card Adapter FD Adapter BP-900 Series Battery Pack VL-10LiBatteryVideo Light Stereo Microphone (commerciallyavailable) WL-D77WirelessController Min...
Page 129 - Optional Accessories; BP-500 Series Battery Packs; Extra batteries for use with the ZR25 MC.
129 E Additional Information Optional Accessories Call or visit your local retailer/dealer for genuine Canon video accessories.You can also obtain genuine accessories for your Canon camcorder by calling: 1-800-828-4040, Canon U.S.A. Information Center. CR-560 Charge Adapter/Car BatteryCable Kit Conn...
Page 130 - VL-10Li Battery Video Light; • Charge the BP-900 Series battery packs; Zoom Remote Controller ZR-1000; terminal of a Canon camcorder, it
130 E Additional Information FS-30.5U Filter Set Neutral density and MC protector filters tohelp you take control of difficult lightingconditions. VL-10Li Battery Video Light This compact yet powerful video light canbe used for both indoor and outdoorshooting.• Use the BP-900 Series battery packs to...
Page 131 - SC-A50 Soft Carrying Case
131 E Additional Information SC-A50 Soft Carrying Case This lightweight bag keeps the camcorderwithin easy reach without weighing youdown or getting in the way. Genuineleather. This mark identifies genuine Canon video accessories. When youuse Canon video equipment, we recommend Canon-brandaccessorie...
Page 132 - Screen Displays; For instructions on how to hook the camcorder up to your TV, see p. 31.; Turning off the LCD screen displays; indicates a flashing display.
132 E Additional Information Screen Displays To display the date and time, press theDATA CODE button. See also p. 73. Press the wireless controller’s TVSCREEN button or turn TV SCREEN onthrough the menu to see the other displayson the TV screen. (The displays appearwhite on-screen.) They will not be...
Page 135 - Microphone input; Memory Card Displays
135 E Additional Information AUDIO IN MIC.IN DV IN Mix balance ( 89) Audio input ( 87) Microphone input DV input ( 79, 99) Condensation warning( 123) ST–1 ST–2 No memory card isinserted ( 93). Image quality ( 93): Standard Fine Folder number-Filenumber ( 95). Slide show inprogress( 101). Recording t...
Page 136 - Recording reminder; and 5 images
136 E Additional Information Recording reminder When you start recording, thecamcorder counts from 0SEC to10SEC. Shots which are shorter thanten seconds may be difficult to editlater. On the other hand, if you are notplanning to edit the recording,remember that a shot which does notcontain action sh...
Page 137 - Caution phrases
137 E Additional Information Appears as a warningto protect the cassetteand also whencondensation isdetected. Remove thecassette as soon aspossible after thecamcorder hasdisplayed the caution. Refer to p. 80 Refer to p. 80 or p. 81 Appears when you tryto do audio dubbingor AV insert on a taperecorde...
Page 138 - Memory card caution phrases
138 E Additional Information Appears immediatelyafter you startrecording, and thevideo heads are badlycontaminated. Makesure to clean the videoheads when thiscaution appears. ( 122) An error has occurredwith the memory card.The camcorder cannotrecord or play back. Atemporary card erroris also possib...
Page 139 - Specifications
139 E Additional Information Specifications ZR25 MC Power Supply (rated): 7.4 V DC Power Consumption (while recording with the AF turned on): 3.6 W (Using viewfinder),4.4 W (Using LCD screen) Television system: EIA standard (525 lines, 60 fields) NTSCcolor signal Video recording system: 2 rotary hea...
Page 140 - Index; Audio Recording and Playback,
140 E Additional Information Index 16:9, 22 Å Abroad, Using the Camcorder, 122Accessories, 7, 129Adapter, AC, 12-14, 16AE Programs, 54AE Shift, 67Analog line-in, 81Art, 60Audio Dubbing, 86Audio Mix, 89Audio Mode, 63Audio Output, 90 Audio Recording and Playback, 30, 63, 89 Audio/Video Terminal, 31Aut...
Page 141 - Optional Accessories, 129
141 E Additional Information ˜ Maintenance, 120Making Better Videos, 34Manual Focus, 70Memory Card Introduction, 92Menus, 37Microphone, 63, 86Monitor Recording, 26Mosaic, 60Mosaic Fade, 59 Ø Optional Accessories, 129 ∏ Pause, Record, 19PC Connection, 91Photo Search, 76Playback, 27Playback Connection...
Page 143 - Menu at a Glance; Function
143 E Additional Information Menu at a Glance Use the list below to quickly navigate the camcorder’s menu. Functions are listedalphabetically. Function First make sure the camera is set to... Then select it from this submenu and set. 16:9 effect CAM.SET UP 6-sec. Date DISP.SET UP Audio dub VCR SET U...
Page 145 - CANON
145 E Additional Information U.S.A. CANON ® ZR25 MC DIGITAL VIDEO CAMCORDER LIMITED WARRANTY The limited warranty set forth below is given by Canon U.S.A., Inc. (“CUSA”) with respect to each Canon ZR25 MC DigitalVideo Camcorder (“DV Camcorder”) purchased and used in the United States. Each Canon DV ...
Page 146 - CANADA
146 E Additional Information CANADA CANON CONSUMER DIGITAL VIDEO EQUIPMENT LIMITEDWARRANTY The limited warranty set forth below is given by Canon Canada Inc. (“Canon Canada”) with respect to Canon digital video equipmentpurchased in Canada. This limited warranty is only effective upon presentation o...