Canon S800- User Manual

Canon S800

Canon S800– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
Page: / 10

Table of Contents:

  • Page 2 – Step 3: Install the Printhead; Remove the printhead from its package.
  • Page 3 – Turn the printhead over, then remove the orange protective cap.; Do not touch the electrical contacts.
  • Page 4 – Step 4: Install the Ink Tanks; Twist off and discard the orange protective cap.
  • Page 5 – Step 5: Connect the Printer to Your Computer; For USB Cables; For Parallel Cables; to install the printer driver before the printer is ready.
  • Page 6 – or; Installation A: Windows®; For Windows 2000 or Windows NT 4.0, log on to Windows as a member of; should run automatically.; If you see this screen. click; Next; Read the License Agreement, then click; Yes
  • Page 7 – Install Software; If you are prompted to restart Windows, remove the CD-ROM, then click; Printer Driver; The printer driver will load automatically.; automatically detected.; OK; to accept; If your computer cannot detect a printer port, refer to the; registration process has completed, click; Exit; Remember to register your product to ensure product support.
  • Page 8 – If you have an iMac® with OS 8.1, install the iMac update 1.0 from; Installer; Read the License Agreement, then click; Accept; Restart
  • Page 9 – After the computer restarts, select the; Apple; icon in the chooser.; To use the BJ Print Monitor, click the Background button to the; Close the Chooser; Step 7: Align the Printhead; Add a sheet of blank paper in the sheet feeder; tab, then click the
  • Page 10 – when prompted to print an alignment test page.; When prompted if the pattern printed successfully, click; Compare the different patterns for each color on the printout:
Loading the manual

S800 Setup Instructions

Step 1: Unpack The Printer






1. Carefully remove all items from the box.

Step 2: Prepare the Printer

1. Remove the spacers and shipping tape from the inside and outside of the printer.








"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Step 3: Install the Printhead; Remove the printhead from its package.

2. Plug the power cord into the back of the printer and connect the other end to a power outlet. 3. Press the POWER button. 4. Open the front cover. The printhead holder automatically moves to the center. Remove the protective tape. 5. Write down the serial number located to the left of the printhea...

Page 3 - Turn the printhead over, then remove the orange protective cap.; Do not touch the electrical contacts.

2. Turn the printhead over, then remove the orange protective cap. NOTE: Do not touch the electrical contacts. 3. Raise the blue lock lever. 4. Gently set the printhead into the holder. The printhead will rest at a slight angle. Do not press it down. Lower the blue lock lever and gently press it dow...

Page 4 - Step 4: Install the Ink Tanks; Twist off and discard the orange protective cap.

Step 4: Install the Ink Tanks 1. Pull the orange tab off the yellow ink tank (BCI-6Y), then remove and discard the plastic wrapper. 2. Twist off and discard the orange protective cap. NOTE: To avoid spilling ink, never press on the sides of an ink tank. 3. Insert the ink tank into the correct slot. ...

Other Canon Models