Canon S600- User Manual

Canon S600

Canon S600– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
Page: / 11

Table of Contents:

  • Page 2 – Remove the protective orange tape.; Step 3: Install the Printhead; Remove the printhead from its package.
  • Page 3 – Do not touch the electrical contacts.; Step 4: Install the Ink Tanks
  • Page 4 – Twist off and discard the orange protective cap.; NOTE: To avoid spilling ink, never press on the sides of an ink tank.; Press down gently until the ink tank lock into place.
  • Page 5 – Section 5: Connect the Printer to Your Computer; For USB Cables; For Parallel Cables; to install the printer driver before the printer is ready.
  • Page 6 – or; Installation A: Windows®; For Windows 2000 or Windows NT 4.0, log on to Windows as an; User's Guide CD-ROM. The setup program should run automactically; If the setup program does not run, click; Next
  • Page 7 – Read the License Agreement, then click; If you are prompted to restart Windows, remove the CD-ROM, then click; The software will begin identifying the printer port being used.; If your computer cannot detect a printer port, refer to the; When the Terminate Installation window appears, click
  • Page 8 – If you have an iMac® with OS 8.1, install the iMac update 1.0 from
  • Page 9 – When the installation and registration process has; TURN ON THE PRINTER; After the computer restarts, select the; Apple; icon in the Chooser. The printer name will highlight and move to; To use the BJ Print Monitor, click the Background button to the; Close the Chooser; Step 7: Align the Printhead; Place a sheet of blank paper in the paper rest.
  • Page 10 – OK; NOTE
Loading the manual

S600 Setup Instructions

Step 1: Unpack The Printer





1. Carefully remove all items from the box.

Step 2: Prepare the Printer

1. Remove the orange shipping tape from the front and sides of the printer.






2. Plug the power cord into the back of the printer and connect the other end to a

power outlet.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Manuals for Canon S600

Summary

Page 2 - Remove the protective orange tape.; Step 3: Install the Printhead; Remove the printhead from its package.

3. Press the POWER button. 4. Open the front cover. The printhead holder automatically moves to the center. Remove the protective orange tape. 5. Write down the serial number located to the right of the printhead. You will need this later to register the product. Step 3: Install the Printhead 1. Rem...

Page 3 - Do not touch the electrical contacts.; Step 4: Install the Ink Tanks

NOTE: Do not touch the electrical contacts. 3. Raise the gray lock lever. 4. Gently slide the printhead into the holder. The printhead will rest at a slight angle. Do not press it down. Lower the lock lever and gently press it down until it locks into place. Step 4: Install the Ink Tanks 1. Pull the...

Page 4 - Twist off and discard the orange protective cap.; NOTE: To avoid spilling ink, never press on the sides of an ink tank.; Press down gently until the ink tank lock into place.

2. Twist off and discard the orange protective cap. NOTE: To avoid spilling ink, never press on the sides of an ink tank. 3. Insert the ink tank into the correct slot. (Refer to the color guide on the printhead.) Press down gently until the ink tank lock into place. 4. Insert the remaining three ink...

Other Canon Models