Canon HG 100TBR - User Manual

5 The following precautions are provided to prevent harm or injury to yourself and others. Make sure to thoroughly understand and follow these precautions before using the product. If you experience any malfunctions, problems, or damage to the product, contact the nearest Canon Service Center or the...

7 If remote control operation takes time or fails, or if other problems occur, try the following corrective actions. The operating distance of this product is approx. 5 m/16.4 ft. in all directions. Remote operations may not be possible if this product is too far away from the camera. In such a case...

8 Nomenclature Release button < > Immediate release < > AF start button Release timing/Movie shooting switch < > Bluetooth logo Battery compartment cover < > 2-sec. delay release < > Movie shooting Battery compartment cover screw Strap hole Indicator lamp (red) Power zo...

9 Connect the remote controller and camera using the Bluetooth function.To connect the remote controller and camera via Bluetooth, first you need to pair the camera and remote controller (registering the device to the camera). 1 Set the camera to the pairing standby mode.  Select [ Pairing ] from t...

12 1 Set up the camera for remote control shooting.  Set the camera for still photo shooting.  Set the drive mode of the camera to < > (remote control). 2 Select the release method.  Set the release timing/movie shooting switch on the remote controller to the < > (immediate release) o...

13 1 Set up the camera for remote control shooting.  Set the camera for movie shooting.  Set [ Remote control ] to [ Enable ] from the menu screen of the camera. 2 Set the switch to < >.  Set the release timing/movie shooting switch on the remote controller to the < > position. 3 Shoo...

14 The Power Zoom Adapter is a lens accessory (sold separately).For information on how to attach to the lens and operate the Power Zoom Adapter, refer to its Instruction Manual. 1 Prepare the Power Zoom Adapter.  Attach the Power Zoom Adapter to the lens, then attach the lens to the camera.  Set t...

15 If the indicator lamp does not light up when you press a button on the remote controller, replace the battery. Use one lithium button cell battery CR2032. Replacing the Battery CR2032 Make sure to insert the battery with the positive (+) side face up, as indicated in the figure above.

17  Countries and Regions Permitting Wireless Communication Function Use Use of wireless communication function is restricted in some countries and regions, and illegal use may be punishable under national or local regulations. To avoid violating wireless regulations, visit the Canon Web site to ch...

19 Numerics 2-sec. delay release..........................8 A AF start button ..................................8 B Bluetooth ...........................................9 ......................................................8 C Checking registered information .....11Connecting.........................