Cambridge Audio NP30 - Manual

6 On Off Power Power AC www.cambridge-audio.com Power Rating: 100-240V AC ~ 50/60Hz Rated Power Consumption: 21W Designed and engineered in London, England Sonata NP30 Network Player L R ToslinkOptical S/P DIFCo-axial For local media Ethernet USB Audio Out Digital Outputs 12V Tip +ve Trigger In 1 2 ...

7 NP30 ENGLISH USB Use to connect a USB storage device or another portable device containing music files. 500mA maximum current consumption. Standby/On When powering up from standby the Standby/On LED will flash approximately once a second as the unit boots up , the display will initially be blank b...

8 Remote control Important! The default mode for the remote allows combined control of the NP30 and Cambridge Audio Azur range amplifiers.The remote can be set to control the Cambridge Audio Sonata range receivers (AR30/DR30) or Cambridge Audio A/V Receivers instead. See later section on this page. ...

9 NP30 ENGLISH Basic connections Network connections Before you can use your NP30 for iRadio/Streaming you must have the following:• A broadband internet connection (such as ADSL) to a suitable internet service provider (ISP). • A network connection either wirelessly via 802.11b/g or n Wi-Fi or wire...

Connecting to a wireless network Place the NP30 in range of your wireless network (usually 10-30m of a suitable wireless transmitter, although this is affected by walls and the construction of your building) and turn it on, via the back panel switch and then on the front panel. The NP30 will automat...

12 Alphameric Search This is a search function menu inserted by the NP30 into the browse tree of UPnP servers that support an external search function.Where available you can select Alphameric search and then enter the name or partial name of an album or track you wish to find.Simply select each cha...

Presets The NP30 supports 20 presets. These can be UuVol Radio stations or streams from most Streaming Services. UPnP/Local media cannot be set as a preset.. To add a station/stream to a preset first select that stream for playback in the normal way. Now press the button this will bring up the prese...

14 Enter the network name This option allows the NP30 to search for and connect to a particular network name only.Type your network name in using the alphanumeric entry screen.If no matching network is found 'Network not found' will be displayed. View Config This menu firstly displays the IP mode (s...

15 NP30 ENGLISH Wired/Wireless connection It is possible to connect your NP30 to your network via an available Ethernet connection (RJ45) or via a Wi-Fi router. By default the unit is in AUTO mode, each time you turn the unit it looks for the presence of a wired connection, and tries to use this, if...

16 Technical specifications DAC Wolfson WM8728 24 bit 96kHz capable THD+N 0.003% @ 1kHz Frequency Response 20Hz-20kHz +/- 0.2dB Signal to Noise ratio > 95dB Total correlated jitter <200pS Digital outputs* ** S/PDIF Co-axial and TOSLink Optical 16-24 Bits, 32-96kHz Audio Formats** WAV containin...