Cadet EBKNW - User Manual
Cadet EBKNW Thermostat – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAVE THESE INSTRUCTIONS; WORKING WITH ELECTRICITY; Phillips Screwdriver; Verify power has been turned off before starting any work!; heater) until prompted to make thermostat connections.; TIPS BEFORE YOU BEGIN; control knob; rounded corners to; IMPORTANT INSTRUCTIONS
- Page 3 – and white) can be hot or you may have one hot and one neutral.; Connect the two black wires from the thermostat together.; INSTALLATION INSTRUCTIONS
- Page 4 – before you turn on the heater.; How to operate your heater; Turn the thermostat knob all the way to the right.; INTERNAL HEATER WIRING DIAGRAMS; LIMITED ONE YEAR WARRANTY:; One hot, one neutral supply wire; One hot, one neutral supply wire; All wiring connections inside wiring compartment; OPERATING INSTRUCTIONS
Assembled in USA
gdaheat.com
OWNER’S GUIDE
Thank you for your purchase! Question or problem? Let us solve it with a
single phone call, email or online chat! We’ll save you a trip back to the store!
Phone:
888.346.7539
(from US or Canada)
email: [email protected]
Hydronic Baseboard
Heater Thermostat
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Cadet EBKNW
Summary
SAVE THESE INSTRUCTIONS 2 1. Read all instructions before in- stalling or using this thermostat. 2. Use this thermostat only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. 3. Do not insert or allow foreign objects ...
3 1. All electrical work and materials must comply with the National Electric Code (NEC), the Occu - pational Safety and Health Act (OSHA), and all state and local codes. 2. Use copper conductors only. 3. Use only on Hydronic baseboard heaters. 4. Turn off power to heater at main disconnect panel. 5...
4 Make sure all wires are properly connected and installation is complete before you turn on the heater. How to operate your heater The room temperature is controlled by the thermostat on the heater. Once installation is complete and power has been restored, follow the steps below for your thermosta...
