Cadet BTF2W - User Manual
Cadet BTF2W Thermostat – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAVE THESE INSTRUCTIONS; WORKING WITH ELECTRICITY; Straight; IMPORTANT INSTRUCTIONS; More frequently asked questions on our website here:
- Page 3 – Verify power has been turned off before starting any work!; TIPS BEFORE YOU BEGIN; RIGHT SIDE; PARTS OF YOUR THERMOSTAT; INSTALLATION INSTRUCTIONS
- Page 5 – MULTIPLE BASEBOARDS WITH ONE THERMOSTAT; whichever
- Page 6 – WARRANTY; To register your product, visit; before you turn on the heater.; OPERATING INSTRUCTIONS; INTERNAL HEATER WIRING DIAGRAMS
Assembled in USA
gdaheat.com
OWNER’S GUIDE
Thank you for your purchase! Question or problem? Let us solve it with a
single phone call, email or online chat! We’ll save you a trip back to the store!
Phone:
888.346.7539
(from US or Canada)
email: [email protected]
Customer Service
Electric Baseboard Heater
Thermostat
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SAVE THESE INSTRUCTIONS 2 WORKING WITH ELECTRICITY REQUIRED TOOLS 1. Read all instructions before install- ing or using this thermostat. 2. Use this thermostat only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. 3....
3 1. All electrical work and materials must comply with the National Elec - tric Code (NEC), the Occupational Safety and Health Act (OSHA), and all state and local codes. 2. Use copper conductors only. 3. Use only on series F baseboard heaters. 4. Turn off power to heater at main disconnect panel. 5...
5 MULTIPLE BASEBOARDS WITH ONE THERMOSTAT Multiple baseboards can be wired in parallel on the same circuit (check national and local codes for safety requirements). Additional electrical supply wire and cable clamp connectors are required. The heaters must be in the same room.The maximum amperage lo...
