Bushnell 78-9675 - Manual

Bushnell 78-9675 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – Attach Telescope and Finderscope; Note: Before assembling tripod legs to; Attach Accessory Tray
Page 3 – HOW TO USE YOUR NEW TELESCOPE; Selecting an Eyepiece:
Page 4 – Balancing the Telescope; the; Declination Axis; UNDERSTANDING THE; Never Look Directly At The Sun With Your Telescope; Enjoying Your New Telescope
Page 5 – Helpful Hints; Using your telescope out a window is NEVER recommended.
Page 6 – . Also on our website will be; ANSWERS TO COMMONLY ASKED QUESTIONS; How do I determine the power my telescope ?
Page 7 – TROUBLESHOOTING GUIDE
Page 8 – Telescope LIFETIME LIMITED WARRANTY; ©2001 Bushnell Performance Optics

Loading the manual

675 x 4.5” Reflector Telescope

Model 78-9675

See pg. 2 (fig. 1)

fig. 1

1. Finderscope
2. Finderscope Mount
3. Rack & Pinion Focusing

Mechanism
4. Eyepiece
5. Fine Adjustment Cables (2)
6. Counterweight
7. Counterweight Shaft

8. Tripod Leg Middle Section
9. Accessory Tray Brace
10. Accessory Tray
11. Tripod Leg Lock Screws
12. Tripod Leg

13. Horizontal Axis Lock
14. Primary Mirror (Internal)
15. Telescope Main Tube
16. Finderscope Focus Adjustment
17. Finderscope Adjustment

Screws (3)
18. Declination Lock Knob
19. Declination Scale
20. Equatorial Mount

21. Right Ascension Lock Knob
22. Latitude Lock Knob
23. Latitude Scale
24. Right Ascension Scale
25. Cradles

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Attach Telescope and Finderscope; Note: Before assembling tripod legs to; Attach Accessory Tray

STANDARD EQUIPMENT • Reflector Telescope Assembly • Equatorial Mount • Variable Height- Heavy Duty Aluminum Tripod • 4mm, 12mm, 20mm focal length - 1.25" Eyepieces . • 5 x 24 mm Finderscope w/ focus adjustment • 3x Barlow • Accessory tray: 3-3/4” bolts, 6-1/2” washers, 3-wingnuts TELESCOPE ASSEM...

Page 3 - HOW TO USE YOUR NEW TELESCOPE; Selecting an Eyepiece:

3. Locate the Counterweight (6) and Counterweight Shaft (7). Loosen the thumb screw located on the Counterweight and slide the Counterweight onto the Counterweight Shaft, then and tighten thumb screw to secure the Counterweight . Thread the Counterweight Shaft into the hole located directly below th...

Page 4 - Balancing the Telescope; the; Declination Axis; UNDERSTANDING THE; Never Look Directly At The Sun With Your Telescope; Enjoying Your New Telescope

Balancing the Telescope 1. Arrange the telescope so that the telescope body is horizontal to the floor (latitude of 0 ° ) . L o o s e n t h e Right Ascension Lock (21) . The telescope should now turn freely about the polar axis. Rotate the telescope about the polar axis so that the Counterweight Sha...