Bushnell 78-9518 - Manual
Bushnell 78-9518 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Attach Telescope and Finderscope; Note: Before assembling tripod legs to; Attach Accessory Tray
- Page 3 – HOW TO USE YOUR NEW TELESCOPE; Selecting an Eyepiece:
- Page 4 – the; Declination Axis; UNDERSTANDING THE EQUATORIAL MOUNT; Never Look Directly At The Sun With Your Telescope
- Page 6 – Telescope LIFETIME LIMITED WARRANTY; ©2001 Bushnell Performance Optics
D
EEP
S
PACE
S
ERIES
675 x 4.5” Reflector Telescope
Model 78-9518
See pg. 2 (fig. 1)
fig. 1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
1. Finderscope
2. Finderscope Mount
3. Rack & Pinion Focusing
Mechanism
4. Eyepiece
5. Fine Adjustment Cables (2)
6. Counterweight
7. Counterweight Shaft
8. Tripod Leg Middle Section
9. Accessory Tray Brace
10. Accessory Tray
11. Tripod Leg Lock Screws
12. Tripod Leg
13. Horizontal Axis Lock
14. Primary Mirror (Internal)
15. Telescope Main Tube
16. Finderscope Focus Adjustme
17. Finderscope Adjustment
Screws (3)
18. Declination Lock Knob
19. Declination Scale
20. Equatorial Mount
21. Right Ascension Lock Knob
22. Latitude Lock Knob
23. Latitude Scale
24. Right Ascension Scale
25. Cradles
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
STANDARD EQUIPMENT • Reflector Telescope Assembly • Equatorial Mount • Variable Height-Hardwood Tripod • 4mm, 12mm, 20mm focal length - Eyepieces . • 5 x 24 mm Finderscope w/ focus adjustment • Accessory Tray • 3x Barlow • Accessory tray: 3-_” bolts, 6-_” washers, 3-wingnuts TELESCOPE ASSEMBLY 1. Re...
3. Locate the Counterweight (6) and Counterweight Shaft (7). Loosen the thumb screw located on the Counterweight and slide the Counterweight onto the Counterweight Shaft, then and tighten thumb screw to secure the Counterweight . Thread the Counterweight Shaft into the hole located directly below th...
1. Arrange the telescope so that the telescope body is horizontal to the floor (latitude of 0 ° ) . L o o s e n t h e Right Ascension Lock (21) . The telescope should now turn freely about the polar axis. Rotate the telescope about the polar axis so that the Counterweight Shaft (7) is parallel to th...
