Bunn 53300.0101 - User Manual

Bunn 53300.0101

Bunn 53300.0101 Coffee Machine – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
Page: / 22

Table of Contents:

  • Page 2 – OR FITNESS FOR A PARTICULAR PURPOSE.; The agents, dealers or employees of BUNN are not authorized to make
  • Page 3 – INTRODUCTION; Recipe
  • Page 4 – NORTH AMERICAN REQUIREMENTS; • Appliance shall not be tilted more than 10° for safe operation.; CE REQUIREMENTS
  • Page 5 – OPERATOR NOTICES; WARNING; S L O W LY; H O T; L I Q U I D; ELECTRICAL REQUIREMENTS; WARNING; - The power cord must be; determine circuit requirements.; DUAL VOLT
  • Page 6 – PLUMBING REQUIREMENTS; CAUTION; DV models only) Select the desired unit voltage based on the; Using a voltmeter, check the voltage and color coding of each; DV models only) Set voltage switch to the appropriate position and; replace the access panel.; EURO Plug
  • Page 7 – Tank Drain; Once the tank is full of water and heated to; INITIAL SETUP; Areas of high altitude will require lowering this temperature
  • Page 8 – COFFEE BREWING
  • Page 9 – Daily; NOT clean this; equipment with a water jet device.; Weekly; sprayhead counter-clockwise from the brewer, and set it aside.; CLEANING
  • Page 10 – Home Screen; Touch the BUNN logo for 3 seconds to enter the programming.; C. BATCH SELECTOR SWITCHES; PROGRAMMING
  • Page 11 – Touch for 3 seconds; Programming Lockout
  • Page 12 – Service Menu Options; Service Menu; certain components are activated.
  • Page 13 – How To Calibrate Bypass Flow Rate; The 60-second timer on the display will count down to zero.
  • Page 14 – Renaming A Recipe; Enabling / Disabling Batch Sizes; navigate to the desired recipe name to edit. Select the recipe name.; How To Calibrate Bypass Flow Rate (continued)
  • Page 15 – will exit them back to the recipe parameter screen.; Modifying Recipe
  • Page 16 – on and off times the brewer will use to make a pulse routine.
  • Page 17 – programming button will navigate the user to the main home screen.; Machine Settings; as temperature lockout) feature is active.; How To Access Brew Settings
  • Page 18 – Enabling FRESHlink Server Settings
  • Page 19 – Enabling FRESHlink Server Settings (continued)
  • Page 21 – Change Password; Passwords can be created or reset from this screen.
Loading the manual

Infusion Series

®

Platinum Edition

®

Batch Brewing Coffee Systems

ICB, ICB-DV, ICB-DV Tall, ICB Twin, ICB Twin Tall

with

ThermoFresh

®

Servers

55079.0000 D 2/21 © 2018 Bunn-O-Matic Corporation

www.bunn.com

For Technical Service, contact Bunn-O-Matic Corporation at 1-800-286-6070.

INSTALLATION & OPERATING GUIDE

Bunn-O-Matic Corporation

Post Office Box 3227, Springfield, Illinois 62708-3227

Phone (217) 529-6601 | Fax (217) 529-6644

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - OR FITNESS FOR A PARTICULAR PURPOSE.; The agents, dealers or employees of BUNN are not authorized to make

2 Bunn-O-Matic Corp. (“BUNN”) warrants equipment manufactured by it as follows: 1) Airpots, thermal carafes, decanters, GPR servers, iced tea/coffee dispensers, MCR/MCP/MCA single cup brewers, thermal servers and ThermoFresh ® servers (mechanical and digital) 1 year parts and 1 year labor. 2) All ot...

Page 3 - INTRODUCTION; Recipe

3 This equipment will brew coffee into an awaiting Soft Heat (SH) Server. The brewer may have an auxiliary hot water faucet. It is only for indoor use on a sturdy and level counter or shelf. Please install in an area where there are no water jet devices. The Infusion Series, similar to the DBC BrewW...

Page 4 - NORTH AMERICAN REQUIREMENTS; • Appliance shall not be tilted more than 10° for safe operation.; CE REQUIREMENTS

4 • This appliance must be installed in locations where it can be overseen by trained personnel. • For proper operation, this appliance must be installed where the temperature is between 41°F to 95°F (5°C to 35°C). • Appliance shall not be tilted more than 10° for safe operation. • An electrician mu...

Other Bunn Coffee Machines Models