Buffalo Technology WLE-POE-S - Manual
Buffalo Technology WLE-POE-S – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Supplying Power to a POE-compatible AirStation; Installation; Supplying Power to non-POE-compatible AirStations
- Page 3 – Compatible AirStations; Connections
- Page 4 – Specifications
- Page 5 – FCC Statement
- Page 7 – Notes
■
NOTE: The WLE-POE-S Supply Adapter must be used with a compatible
AirStation or POE Receiver when supplying power to the AirStation. Check the
specifications on Page 4 to verify compatibility.
Package Contents:
Power Over Ethernet Supply
Connecting to your
Power-Over-Ethernet Supply Adapter
(WLE-POE-S)
The WLE-POE-S Power Supply Adapter is an
adapter for supplying power the AirStation. Using
this product enables compatible AirStations or
AirStations with a compatible POE Receiver
Adapter to be used in locations that are not
provided with a nearby power source.
PY00-29024-DM20
◗
POE Supply Adapter
1
◗
Power Supply Cable
1
◗
Setup Guide
1
◗
Warranty Certificate
1
Precautions:
◗
Connect the AC adapter last.
◗
Always connect the POE-compatible AirStation to the POE port.
◗
The Receiver and Supply cannot be attached by CAT5 longer then 100M.
◗
Use POE CAT5 cables (all eight wires)
◗
Use commercially available CAT5 cables. Using cables prepared by the
user may result in the network configuration not functioning properly.
◗
The products will become warm during use; this does not indicate
malfunction.
Screw holes
POE ports
Connect to the POE-compatible AirStation
or WLE-POE-R Adapter.
Air vents
AC Adapter
Power indicator
Lit green when the product is connected
to the AC outlet.
LAN port
Connect to hub, etc.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 ■ NOTE: DO NOT connect a hub or PC to the product's POE port. Doing so may result in damage or burnout of the hub or PC Connect a POE-compatible AirStation or a compatible POR Receiver Adapter to the POE port. Supplying Power to a POE-compatible AirStation ◗ Connect the POE-compatible AirStation t...
3 ■ NOTE: Using a cable other then CAT5 may prevent the supply of power to the AirStation. Also, the POE receiver does not have a repeater function. Thus, the total length of cable allowed between the Power Supply Adapter and the POE Receiver is 100 meters. Compatible AirStations ◗ POE-compatible Ai...
4 Specifications Transmission Rate 100 Mbps (100BASE-TX) 10 Mbps (10BASE-T) Connector RJ-45 modular connector POE Port 100BASE-TX / 10BASE-T dual purpose port (for connecting the POE Receiver Adapter) LAN Port 100BASE-TX / 10BASE-T dual purpose port (for connecting a hub or PC) Input Power Supply (A...
