Buffalo Technology HS-DGL Series - Manual
Buffalo Technology HS-DGL Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Step 1: Connect your Cables; Ethernet Cable into the Ethernet port on the back of LinkStation.
- Page 3 – Step 2: Check your Connection; If problems persist, contact our technical support. See Page 11 for
- Page 4 – Step 3: Link Navigator Software
- Page 5 – Step 4: Using the Confi guration Utility
- Page 7 – Step 5: Accessing LinkStation Data from a PC
- Page 8 – Technical Specifications
- Page 9 – MEMO
- Page 11 – Buffalo Technology
- Page 12 – products shall be returned with a copy of proof of purchase.; BUFFALO TECHNOLOGY UK LTD
Package Contents:
Main unit (LinkStation)
1
LinkStation Base Plate
1
Base Rubber Feet
4
Ethernet Cable
1
Power Cord
1
LinkNavigator Installation CD
1
Quick Setup Guide (this user’s guide)
1
Warranty card
1
LinkStation’s face is protected during shipping by a plastic fi lm covering. The fi lm
may be removed by peeling it away from any corner of the front face.
Quick Setup Guide
LinkStation MultiMedia Home Server
HS-DGL Series
www.buffalo-technology.com
PY00-31038-DM20-01 1-01
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Step 1: Connect your Cables Plug LinkStation’s power cord into a power outlet. Then, plug the included Ethernet Cable into the Ethernet port on the back of LinkStation. Connect the other end of the Ethernet Cable into a hub, switch, or router on the network, or connect it directly to a PC. Connect...
3 Check the LINK/ACT light on the front of the LinkStation. If it is lit, then LinkStation is connected properly; please turn to Page 4 to continue setup. If it is not lit, continue to the next step. If the LINK/ACT light is still not lit, please verify the following: Both LinkStation and the hub, s...
4 Insert the LinkNavigator CD into the PC’s CD-ROM drive. Depending on the PC’s confi guration, the EasySetup program may launch. If it does not automatically launch, manually launch it by pressing the ‘ Start ’ menu and selecting the ‘ Run... ’ option. When the ‘Run’ dialog opens, type x:\easysetup...
