Broan NDK35830SS - Manual
Broan NDK35830SS – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
NDK358 SERIES
NON-DUCT FILTER KIT
For use with Broan AP Series or RP2 Series
range hoods.
ALUMINUM
FILTER
NON DUCT
FILTER
NON DUCT
FILTER TABS
ALUMINUM FILTER
FINGER RING
3. Lift the hood up and over the 4 THREADED
STUDS. Secure hood to HOUSING with 4 HEX
NUTS (provided).
MOUNTING
SCREWS
HEX
NUTS
HOUSING
ALUMINUM
FILTERS
THREADED
STUDS
4. Remove ALUMINUM FILTERS from hood
(if previously installed).
5. Slide ALUMINUM FILTERS beneath TABS on NON
DUCT FILTERS. Make sure FINGER RING faces
outward. Install filters into hood with ALUMINUM
FILTERS facing outward.
Replacement Filters:
• Non-Duct Filter ...............................................88F
• Aluminum Filter (Qty. 2) ..................................97017455
• Aluminum Filter with Microban
®
(Qty. 2)..........97017456
9"
CENTER
LINE
HOUSING
MOUNTING
SCREWS (4)
WOOD SHIMS
(recessed-bottom
cabinets only)
CABINET FRONT
CABINET
BOTTOM
13
15/16
"
(30" hood)
16
15/16
"
(36" hood)
13
15/16
"
(30" hood)
16
15/16
"
(36" hood)
1½"
1.
Screw the 4 MOUNTING SCREWS (provided) into
the CABINET BOTTOM where shown. Recessed-
bottom cabinets require WOOD SHIMS to be
secured to the cabinet bottom before attaching the
mounting screws.
VERTICAL DUCT
KNOCKOUT
2. Remove VERTICAL DUCT KNOCKOUT from hood.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
