Page 2 - Braun Vista Series; Sample Warranty/Registration Card; This information must; Warranty and Registration Instructions; warranty cards must be processed to; Congratulations; Pump Code; cation Tag
NVL917IB e5*72/245*95/54*0110*00 1-800-THE LIFT™ BRAUNLIFT.COM™ The Braun Corporation DOT Public Use Lift MODEL# Max. Lifting Capacity - 800 lbs. PATENT PENDING- 5,261,779-6,065,924-6,238,169-6,46 4,447-6,599,079-6,692,217-6,739,824 MFG DATE 55 14CG PUMP CODE CYLINDER A5-00025 SERIAL NUMBER 09/20/06...
Page 3 - Contents
Page 1 Contents Troubleshooting and Maintenance Lift Terminology ............................................................. 2 Switch and Sensor Locations ..................................... 3 Certi fi cation Checklist Diagnostic Procedures ......... 4 Platform Fold Pressure Adjustment ............
Page 4 - Lift Terminology; Inboard; Outboard
Page 2 Lift Terminology UP DOWN 328 19 FOLD UN FOL D 328 20 ® Hand-Held Pendant Control Top Parallel Arms (2) Adjustable Quiet-Ride Stow Blocks (2) Main Cylinders (2) Vertical Arm Covers (4) Opposite Pump Side Vertical Arm Handrails (2) Outer Barrier (Automatic Outboard Roll Stop) Bottom Parallel Ar...
Page 5 - Switch and Sensor Locations
Page 3 * Outer Barrier Raised Magnetic Sensor 30433A60 * Ground Detect Magnet 31664 * Ground Detect Magnetic Sensor 30433A60 * Outer Barrier Raised Magnet 31664 Threshold Strip Switch31221A (Qty. 2) * Bridging Microswitch 975-0443RNA (Rear Pump) 975-0443FNA (Front Pump) * IB Occupancy Microswitch As...
Page 6 - Certification Checklist Diagnostic Procedures; fl
Page 4 Certification Checklist Diagnostic Procedures The following operations and conditions must be functionally veri fi ed in order for the lift to be FMVSS 403/404 compliant. If an operation does not function as described or a condition is not met, follow the refer-enced procedures to correct the ...
Page 7 - Platform Fold Pressure Adjustment; DO NOT adjust this valve!
Page 5 1. Position the platform at the fl oor level loading position. 2. Loosen the hex nut on the adjustment screw (do not remove hex nut). 3. Turn the adjustment screw counter clockwise until the platform does not fold when the Fold button is pressed. 4. Turn the adjustment screw clockwise in 1/4 ...
Page 8 - Platform Angle Adjustment; equals; Figure C; must
Page 6 Platform Angle Adjustment Wedges Angle A equals Angle B . ✓ B Figure C A Approximately 1” Clearance Figure D Millennium “NL” Series Century “NCL” Series Vista “NVL” Series Inboard Outboard Inboard Outboard Wedges Toe must angle down slightly . Barrier must unfold fully . Adjusting the platfor...
Page 9 - Must make full contact; Gap; not permitted; stop blocks; with; Right; ensure both
Page 7 Platform Angle Adjustment Screws Adjustment Screw Allen Head A B Platform Angle Adjustment Adjustment Allen screws are provided on each side of the lift platform for adjusting the platform angle. Adjust platform angle as speci fi ed on previous page. Platform Stop Blocks Must make full contac...
Page 10 - Platform Floor Level Adjustment; LCD Screen; Floor Level Adjustment:
Page 8 Platform Floor Level Adjustment Diagnostics: Diagnostic codes have been established in event the lift platform fl oor position does not set (the lift does not sound three “beeps” - see Step 5 above). The control board located inside the pump hous- 91 – The platform position is out of a prede-...
Page 11 - Bridging Microswitch Adjustment
Page 9 H G Platform Stop Block Inboard Vertical Edge of Vertical Arm Bridging Microswitch Adjustment Screw Bridging Microswitch Adjustment Bridging Microswitch: The bridging microswitch is located at the bottom of the right (front) vertical arm. See Photos A and B. An adjust-ment screw is built into...
Page 12 - LCD Lift Codes
Page 10 To better understand the Braun LCD Trouble shooting display you must fi rst understand the numbers that appear on the screen. There are Flashing Codes, Solid Error Codes, and Solid Normal Operational Codes. Flashing Codes #65-89: About 10 seconds after an operation has stopped there are a se...
Page 14 - Maintenance and Lubrication; Lubrication Diagram
Page 12 UP DO WN 328 19 FOL D UNFO LD 3282 0 ® Speci fi ed (recommended) Available Braun Lubricant Type Lubricant Amount Part No. LO - Light Oil LG - Light Grease Light Grease Lubriplate 14 oz. (Multipurpose) Can Light Penetrating Oil LPS2, General Purpose 11 oz. (30 weight or equivalent) Penetratin...
Page 15 - Maintenance and Lubrication Schedule; ed by an; WARNING; Cycles
Page 13 Maintenance and Lubrication Schedule Maintenance and lubrication procedures must be performed as speci fi ed by an authorized service technician. Failure to do so may result in serious bodily injury and/or property damage. Proper maintenance is necessary to ensure safe, troublefree operation...
Page 17 - do not mix; platform
Page 15 1500 Cycles continued Resecure or replace if needed. Realign towers and vertical arms. Lubri-cate or correct as needed. Resecure or replace if needed. Replace damaged parts. Apply Light Oil to inner roll stop lock pivot points. Replace damaged parts and resecure as needed. Resecure, replace ...
Page 18 - Repeat all; Consecutive
Page 16 Maintenance and Lubrication Schedule Apply Door-Ease or replace if needed. See Lubri-cation Diagram. Resecure or replace if needed. Resecure, repair or replace if needed. Check to see that the lift is securely anchored to the vehicle and there are no loose bolts, broken welds, or stress frac...
Page 19 - Lift Electrical Schematic
Page 17 Lift Electrical Schematic NVL917-05-025.ai BK(6) BK(4) GN(20) GN(20) GN BK GN BK BK RD RD RD OR GN RD RD RD BK GN OR YL(26) RD(26) GN(26) BU(16) GN(20) GN(20) GN(20) PK(20) WH(20) WH(20) GN(20) GN(20) GN(20) GN(20) GN(14) BK(18) UP/FOLD SOLENOID RD (2) PUMP RD(14) CIRCUIT SENTRY (CIRCUIT BRE...
Page 20 - Lift Wiring Diagram; Note: Shown with lift in stowed position.
Page 18 Unfold for: Lift Electrical Schematic Lift Wiring Diagram Platform Lights (Option) Circuit Sentry ( Circuit Breaker) Bat. Aux. Lift Power Cable 205-0712-37 Pump Module Power Feed 26082A-4 Connects to Vehicle Battery (+) Positive Post Lead Wire 13362A GN(20) RD(14) ) 0 2( K B or Note polarity...
Page 21 - Description; Hydraulic Schematic
Page 19 Orifice Pump Side Cylinder BACKUP PUMP 2500 PSI Down Valve 1900 PSI PUMP Opposite Pump Cylinder M Orifice 800PSI Secondary Valve Folding Relief Valve Lifting Relief Valve Fixed Displacement Pump Vented Reservoir Backup Pump Single Acting Cylinder Check Valve Manual Shutoff Valve 2 Way 2 Posi...
Page 22 - Hydraulics Parts List; Hydraulic Fluid; do
Page 20 Hydraulics Parts List Item Qty. Description Part # 1 1 Pump Assembly (M-268-0112) 120G / 12V / Dual Relief 30915-12V 2 1 Lead Wire Assembly, #6 Guage 29049 3 1 Clamp, Hose (M258) 29663 4 1 Diode Assembly, Up Solenoid 73906A 5 1 Solenoid, 4-Post - Prestolite 28308 6 1 Motor, Pump - 12 Volt - ...
Page 23 - Hydraulics Diagram
Page 21 27 Opposite Pump Cylinder Manual Backup Pump 24 25 21 12 15 27 23 22 30 19 1 16 6 13 29 28 Hydraulic Pump Motor Pump Side Cylinder 10 7 17 20 18 28 26 26 14 2 3 5 4 Hydraulics Diagram
Page 24 - only
Page 22 Pump Module Parts List * Apply red #271 Thread Locker Loctite ® to the four hex bolts (items 26 and 27) if a blue nylon patch is not present on the bolts when retro fi tting an M268 pump assembly. Loctite ® is available from The Braun Corporation under part number 11522-1. t Indicates items ...
Page 25 - Pump Mounting Bolts
Page 23 Pump Module Diagram Note: Rear pump module shown, front pump module mirror image. 44 37 43 42 41 40 39 4 7 3 38 38 26 27 25 28 29 27 1 14 12 23 15 2 21 30 31 33 34 36 35 22 16 19 20 9 10 18 5 13 8 6 11b UP DOW N 328 19 FOL D UNFO LD 328 20 ® 11c UNF OLD FOLD DOWN UP 32 35 3 11a UP DO WN 328 ...
Page 26 - Repair Parts List; Part Numbers of Items Identical on All Lift Models; Part Numbers of Items Dedicated per Lift Model
Page 24 Repair Parts List Part Numbers of Items Identical on All Lift Models 14 14 Washer, .516" I.D. x 1" O.D. x .0269", Auto BK 15328 15 4 Washer, Finger, Disc Spring 27276 16 8 Snap-Ring 1/2" 13273 17 4 Snap-Ring 5/16" 24570 18 4 O-Ring, 5/16" I.D. x 1/16" O.D. 26614 1...
Page 27 - Exploded View
Page 25 Exploded View 150 53 114 111 109 104 113 53 53 53 50 116 53 123 49 188 22 180 53 109 111 41 14 16 153 77 139 51 139 91 76 105 149 149 105 79 113 53 53 50 116 15 14 126 91 41 76 33 79 101 8 162 32 32 32 172 122 32 151 69 16 153 85 77 102 15 115 115 115 85 126 79 33 7 101 149 107 25 155 89 102...
Page 28 - NOTES; This page intentionally left blank.
Page 26 Unfold for: Series A5 NVL917IB Lift Exploded V iew NOTES This page intentionally left blank.
Page 29 - Dealers Worldwide
Over 300 Braun Dealers Worldwide "Providing Access to the World" ® "Providing Access to the World" International Corporate Hdqrs: P.O. Box 310 Winamac, IN 46996 USA 1-800-THE LIFT ® (574) 946-6153 FAX: (574) 946-4670 ®
Page 30 - Return Authorization Procedure; Series; Braun NVL Series; Vista; CKA; Braun
Public UseWheelchair Lifts Patent #5,261,779 Patent #6,065,924 Patent #6,238,169 Patent #5,261,779 Patent #6,065,924 Patent #6,238,169 Patent #6,464,447 Patent #6,599,079 Patent #6,692,217 Patent #6,464,447 Patent #6,599,079 Patent #6,692,217 Patent #6,739,824 Patent #6,837,670 Patents Pending Paten...