Zanussi ZWQ 6120 - Manuals

Programme / Type of washing Load Possible options Spin : A spin cycle from 500 to 1200/1000 4) after a Rinse hold (or Night cycle plus). 5,5 kg Delay start 1) Reference programme for test conforming to CEI 456 standard ( Cottons 60° + Eco option) : 49 L / 0,94 kWh / 210 min 2) Not available with Eco...

Problems Causes The washing machine stops during a wash cycle : • the water or electricity supply is defective,• a Rinse hold has been selected,• the drum shutters are open. The lid doesn’t open at the end of the cycle : • the temperature inside the drum is too high,• the lid unlocks 1 - 2 minutes a...

Technical Specifications DIMENSIONS Height Width Depth 850 mm 400 mm 600 mm LINE VOLTAGE /FREQUENCY POWER CONSUMPTION 230 V / 50 Hz 2300 W WATER PRESSURE Minimum Maximum 0,05 MPa (0,5 bar) 0,8 MPa (8 bar) Connection to water supply Type 20/27 Installation Remove all protective packaging for transit ...

be extended. If it is too short, please contact the after- sales service. Drainage Fit the U-piece on the drain- age hose. Place everything in a drainage point (or in a sink) at a height of between 70 and 100 cm. Ensure it is positioned securely. Air must be able to enter the end of the hose, to avo...