Zanussi ZWQ 5103 - Manuals - manualsarea.com

Page 2 - General safety

Contents Safety Information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 How to run a wash cycle? _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Care and clean...

Page 3 - Product description; Control panel

• Refer to the instructions on the label of each item be- fore washing. • Do not put items into the washing machine which have had stains removed with petrol, alcohol, trichlorethylen etc. If such stain removers have been used, wait until the product has evaporated before putting these items into th...

Page 5 - Washing programmes; Programme / Type of washing

patible with the selected programme, the “Start/Pause” pushbutton flashes red. “Prewash” option The appliance runs a prewash at 30°C max. “Quick” option The washing time will be reduced depending on the pro- gramme selected. “Extra Rinse” option The washing machine will add one or more rinses during...

Page 7 - Care and cleaning; Descaling the appliance; Water inlet filters

Programme / Type of washing Load Available options Spin : A spin cycle from 500 to 850 rpm for mod- el ZWP581/ 1000 rpm for model ZWQ5102,ZWQ5103/ 1200 rpm for model ZWQ5122 after a Rinse hold option. 5,5 kg Delay start 1) We recommend not to add any detergent for prewash phase. Care and cleaning Un...

Page 8 - Operating Problems; Problems

Operating Problems Numerous checks were carried out on your appliance be- fore it left the factory. However, should you notice a mal- function, please refer to the sections below before contact- ing the after-sales service. Problems Causes The appliance doesn’t start or doesn’t fill: • the appliance...

Page 9 - Detergents and Additives

Problems Causes The wash cycle is much too long: • the water inlet filters are dirty (see “Care and cleaning ”),• the power or water supply has been cut off,• the motor overheating detector has been activated,• the water inlet temperature is lower than usual,• the foam detection security system has ...

Page 10 - Programme; Installation

Technical Specifications DIMENSIONS Height Width Depth 850 mm 400 mm 600 mm LINE VOLTAGE /FREQUENCY POWER CONSUMPTION FUSE 230 V / 50 Hz 2300 W 10 A Level of protection against ingress of solid particles and moisture IPX4 Water supply Cold water WATER PRESSURE Minimum Maximum 0,05 MPa (0,5 bar) 0,8 ...

Page 11 - A B

Unpacking 2 1 1 2 2 1 Untying A B D C A 1 2 B 2 1 B D Keep the transit bolts for when you move the appli- ance. To install the appliance at the same level as neigh- boring furniture, cut these plastic pieces. Water supply 90 O 90 O 90 O In case of necessity move the inlet hose in the direc- tion sho...

Page 12 - Environment concerns; Disposing of the appliance

Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of corre...