Yamaha YSTSW216BL - Manuals

1 SPECIAL INSTRUCTIONS FOR U.K. MODEL For U.K. customers If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below. Note: The plug severed from the ma...

2 ( : subwoofer, : front speaker) One subwoofer will have a good effect on your audio system, however, the use of two subwoofers is recommended to obtain more effect. If using one subwoofer, it is recommended to place it on the outside of either the right or the left front speaker. (See fig. .) If u...

3 Choose one of the following two connecting methods that is more suitable for your audio system. ■ Choose (pages 3-4) when you want to enjoy 5.1 surround system ■ Choose (pages 5-6) when you want to output the low frequency signals Unplug the subwoofer and other audio/video components before making...

5 Select this method if your amplifier has no line output (pin jack) terminal. If your amplifier has two sets of front speaker output terminals and both terminals can output sound signals simultaneously. • Connect one set of front speaker output terminals of the amplifier to the INPUT 1 terminals of...

7 For connection, keep the speaker cables as short as possible. Do not bundle or roll up the excess part of the cables. If the connections are faulty, no sound will be heard from the subwoofer or the speakers, or both of them. Make sure that the + and – polarity markings of the speaker cables are ob...

8 1 POWER switch Press this switch to the ON position to turn on the power to the subwoofer. When the power of the subwoofer is on, the power indicator ( 4 ) on the rear panel light up in green. Press this switch again to set it to OFF position to turn off the power of the subwoofer. 2 OUTPUT (TO SP...

9 Before using the subwoofer, adjust the subwoofer to obtain the optimum volume and tone balance between the subwoofer and the front speakers by following the procedures described below. 1 Set the VOLUME control to minimum (0). 2 Turn on the power of all the other components. 3 Press the POWER switc...

10 The frequency response of this subwoofer The figures below show the optimum adjustment of each control and the frequency characteristics when this subwoofer is combined with a typical front speaker system. ■ EX.1 When combined with a 4” or 6.5” (10 cm or 16 cm) acoustic suspension, 2 way system f...

11 In 1988, Yamaha brought to the marketplace speaker systems utilizing YST (Yamaha Active Servo Technology) to give powerful, high quality bass reproduction. This technique uses a direct connection between the amplifier and speaker, allowing accurate signal transmission and precise speaker control....

12 Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instructions given below do not help, disconnect the power cord and contact your authorized YAMAHA dealer or service center. TROUBLESHOOTING Problem Cause What to ...

13 Type ..... Advanced Yamaha Active Servo Technology II Driver ........................................ 25 cm (10”) cone woofer Magnetic shielding type Output Power .............. 50 W (100 Hz, 5 Ω 10 %T.H.D) Dynamic Power ............................................ 100 W, 5 Ω Input Impedance .......