Yamaha YDP2006 - Manuals

3 – Precautions YDP2006 Precautions Avoid excessive heat, humidity, dust and vibration Keep the unit away from locations where it is likely to be exposed to high temperatures orhumidity - such as near radiators, stoves, etc. Also avoid locations which are subject toexcessive dirt accumulation or vib...

4 – The front panel YDP2006 The front panel From left to right, the controls on the front panel are: 1 INPUT LEVEL – two concentric rotary controls (inner control is left channel) to adjust the level of the signal fed into the YDP2006. 2 Level meters – L and R – These meters come after the A-D conve...

5 – The rear panel YDP2006 The rear panel 1 Y-485 – these bi-directional connectors are used to connect the unit on a network “chain” using the Y-485 control protocol. They do not carry audio signals. When making a Y-485connection, either terminal may be used for IN or OUT.Please use digital audio c...

6 – Memory areas YDP2006 Memory areas How the memories are arranged in the YDP2006 The unit contains 40 memory areas which contain equalization settings, all of which areuser-programmable. This allows you to set up and store frequently-used equalization set-tings which you can recall at any time. Th...

7 – Using the display YDP2006 Using the display The [PEQ] and [NOTCH] keys Using the large LCD screen, your YDP2006 has several different ways of displaying settings,and being able to edit them. These different modes are accessed with the [PEQ] and [NOTCH] keys. Pressing the [PEQ] key will take you ...

8 – Using the display – The [[[[LLLL////<<<<]]]] and [[[[RRRR////>>>>]]]] keys YDP2006 The [L/<] and [R/>] keys When in stereo mode, each of the above displays can show either the settings for the leftchannel, or the settings for the right channel. To select which chann...

9 – Using the display – Linking channels YDP2006 Linking channels In order to change both the L and R channels at the same time, the L and R channels must belinked. When the channels are linked, making any changes to one channel will also affectthe other. Existing parameters from one channel will no...

10 – Utilities YDP2006 Utilities The [UTILITY] key allows you to set up various system parameters for the unit. Repeated presses of the key will cycle you through the following modes. You can also use the [%] and [%] keys to cycle through these parameters (but this will not return to the equalizatio...

11 – Utilities – BULK DUMP YDP2006 BULK DUMP Three parameters are available here:Use the F encoder to select whether bulk dump operations will take place through the MIDI or Y-485 connections.Use the G encoder to select what kind of data will be dumped. You can choose between: ALL DATA (all memoryar...

12 – Utilities – Y-485 COMM. I/O YDP2006 Y-485 COMM. I/O Only one parameter is available here: the data which willbe recognized by the unit over the Y-485 network. Thereare three values, selectable with the F encoder: OFF, PGM CHANGE and ALL. When OFF, no Y-485 messages will berecognized by the unit...

13 – Utilities – SOFTWARE PROTECT YDP2006 SOFTWARE PROTECT Use the F encoder to turn memory protection on or off. When ON, the unit will not respond to Program Changemessages received over MIDI or Y-485. You will not be ableto store or copy any new or edited equalization settings ifprotection is ON....

14 – TUTORIAL YDP2006 TUTORIAL In this section we will go over the setting up of the YDP2006, from the parametric equalizerand the filters, to the delay and input attenuation. The information is presented as a tuto-rial—from it, you should be able to pick up the techniques necessary to make settings...

15 – TUTORIAL – Making parametric equalizer settings YDP2006 Making parametric equalizer settings Here is where the user interface of the YDP2006 really makes parametric equalization easy.For the most part, you will never need to set any parameters numerically (unless you wantto)—the resulting frequ...

16 – TUTORIAL – Using the notch filters, and the HPF and LPF YDP2006 5 Once you have decided on the frequency for the equal-izer band, turn the G rotary encoder to move the response curve up or down, and the Q rotary encoder to adjust the width of the band. The values of F, G andQ (frequency, gain a...

17 – TUTORIAL – Using the notch filters, and the HPF and LPF YDP2006 2 To select a filter for editing (if it’s not already selected),press one of the notch or filter selectors. The indicationin the top left corner below the “Lch”, “Rch” or“MONO” indication shows the filter that is currentlyselected ...

18 – TUTORIAL – Setting up the input level, attenuation and delay YDP2006 Setting up the input level, attenuation and delay I. Input level and input attenuation There are two operations on the YDP2006 that affect the input level—the input level controlin the analog domain (pre A/D converters), and t...

19 – Specifications YDP2006 Specifications Frequency response 20Hz to 20kHz 0 ± 1, 0dB Dynamic range Emphasis ON typical, 110dB > 104dB Emphasis OFF typical, 106dB > 100dB Hum and noise Emphasis ON < -80dBm Emphasis OFF <-76dBm Distortion (max level, Emphasis ON) < 0.007% (max level, ...

YAMAHA [Digital Parametric Equalizer] date: 1993.10.22 Model: YDP2006 MIDI Implementation Chart Version: 1.0 Function Transmitted Recognized Remarks BasicChannel DefaultChanged XX 1 - 16, off1 - 16, off memorized Mode DefaultMessagesAltered XX ************** OMNI off/OMNI on XX memorized NoteNumber ...

68 – Block diagram / Schéma de principe / Blockdiagramm YDP2006 Block diagram / Schéma de principe / Blockdiagramm L INPUT INPUT LEVEL PreEmphasis LEVEL DeEmphasis OUTPUT OFF ON +4 -20 OFF ON +4 -20 A/D HA D/A ATT L R OFF ON +4 -20 OFF ON +4 -20 A/D HA D/A ATT R DSP MIDI IN OUT THRU Y-485 LCD KEY LE...

69 – Dimensions / Abmessungen YDP2006 Dimensions / Abmessungen All measurements given in mm (inches). Inch values given to nearest 1 / 16 ”. Toutes les mesures sont données en millimètres (pouces). Précision d’ 1 / 16 pour les valeurs en pouces. Alle Maße in mm (Zoll). Zoll-Angaben mit einer Genauig...

3 – Precautions YDP2006 Precautions Avoid excessive heat, humidity, dust and vibration Keep the unit away from locations where it is likely to be exposed to high temperatures orhumidity - such as near radiators, stoves, etc. Also avoid locations which are subject toexcessive dirt accumulation or vib...

4 – The front panel YDP2006 The front panel From left to right, the controls on the front panel are: 1 INPUT LEVEL – two concentric rotary controls (inner control is left channel) to adjust the level of the signal fed into the YDP2006. 2 Level meters – L and R – These meters come after the A-D conve...

5 – The rear panel YDP2006 The rear panel 1 Y-485 – these bi-directional connectors are used to connect the unit on a network “chain” using the Y-485 control protocol. They do not carry audio signals. When making a Y-485connection, either terminal may be used for IN or OUT.Please use digital audio c...

6 – Memory areas YDP2006 Memory areas How the memories are arranged in the YDP2006 The unit contains 40 memory areas which contain equalization settings, all of which areuser-programmable. This allows you to set up and store frequently-used equalization set-tings which you can recall at any time. Th...

7 – Using the display YDP2006 Using the display The [PEQ] and [NOTCH] keys Using the large LCD screen, your YDP2006 has several different ways of displaying settings,and being able to edit them. These different modes are accessed with the [PEQ] and [NOTCH] keys. Pressing the [PEQ] key will take you ...

8 – Using the display – The [[[[LLLL////<<<<]]]] and [[[[RRRR////>>>>]]]] keys YDP2006 The [L/<] and [R/>] keys When in stereo mode, each of the above displays can show either the settings for the leftchannel, or the settings for the right channel. To select which chann...

9 – Using the display – Linking channels YDP2006 Linking channels In order to change both the L and R channels at the same time, the L and R channels must belinked. When the channels are linked, making any changes to one channel will also affectthe other. Existing parameters from one channel will no...

10 – Utilities YDP2006 Utilities The [UTILITY] key allows you to set up various system parameters for the unit. Repeated presses of the key will cycle you through the following modes. You can also use the [%] and [%] keys to cycle through these parameters (but this will not return to the equalizatio...

11 – Utilities – BULK DUMP YDP2006 BULK DUMP Three parameters are available here:Use the F encoder to select whether bulk dump operations will take place through the MIDI or Y-485 connections.Use the G encoder to select what kind of data will be dumped. You can choose between: ALL DATA (all memoryar...

12 – Utilities – Y-485 COMM. I/O YDP2006 Y-485 COMM. I/O Only one parameter is available here: the data which willbe recognized by the unit over the Y-485 network. Thereare three values, selectable with the F encoder: OFF, PGM CHANGE and ALL. When OFF, no Y-485 messages will berecognized by the unit...

13 – Utilities – SOFTWARE PROTECT YDP2006 SOFTWARE PROTECT Use the F encoder to turn memory protection on or off. When ON, the unit will not respond to Program Changemessages received over MIDI or Y-485. You will not be ableto store or copy any new or edited equalization settings ifprotection is ON....

14 – TUTORIAL YDP2006 TUTORIAL In this section we will go over the setting up of the YDP2006, from the parametric equalizerand the filters, to the delay and input attenuation. The information is presented as a tuto-rial—from it, you should be able to pick up the techniques necessary to make settings...

15 – TUTORIAL – Making parametric equalizer settings YDP2006 Making parametric equalizer settings Here is where the user interface of the YDP2006 really makes parametric equalization easy.For the most part, you will never need to set any parameters numerically (unless you wantto)—the resulting frequ...

16 – TUTORIAL – Using the notch filters, and the HPF and LPF YDP2006 5 Once you have decided on the frequency for the equal-izer band, turn the G rotary encoder to move the response curve up or down, and the Q rotary encoder to adjust the width of the band. The values of F, G andQ (frequency, gain a...

17 – TUTORIAL – Using the notch filters, and the HPF and LPF YDP2006 2 To select a filter for editing (if it’s not already selected),press one of the notch or filter selectors. The indicationin the top left corner below the “Lch”, “Rch” or“MONO” indication shows the filter that is currentlyselected ...

18 – TUTORIAL – Setting up the input level, attenuation and delay YDP2006 Setting up the input level, attenuation and delay I. Input level and input attenuation There are two operations on the YDP2006 that affect the input level—the input level controlin the analog domain (pre A/D converters), and t...

19 – Specifications YDP2006 Specifications Frequency response 20Hz to 20kHz 0 ± 1, 0dB Dynamic range Emphasis ON typical, 110dB > 104dB Emphasis OFF typical, 106dB > 100dB Hum and noise Emphasis ON < -80dBm Emphasis OFF <-76dBm Distortion (max level, Emphasis ON) < 0.007% (max level, ...

YAMAHA [Digital Parametric Equalizer] date: 1993.10.22 Model: YDP2006 MIDI Implementation Chart Version: 1.0 Function Transmitted Recognized Remarks BasicChannel DefaultChanged XX 1 - 16, off1 - 16, off memorized Mode DefaultMessagesAltered XX ************** OMNI off/OMNI on XX memorized NoteNumber ...

68 – Block diagram / Schéma de principe / Blockdiagramm YDP2006 Block diagram / Schéma de principe / Blockdiagramm L INPUT INPUT LEVEL PreEmphasis LEVEL DeEmphasis OUTPUT OFF ON +4 -20 OFF ON +4 -20 A/D HA D/A ATT L R OFF ON +4 -20 OFF ON +4 -20 A/D HA D/A ATT R DSP MIDI IN OUT THRU Y-485 LCD KEY LE...

69 – Dimensions / Abmessungen YDP2006 Dimensions / Abmessungen All measurements given in mm (inches). Inch values given to nearest 1 / 16 ”. Toutes les mesures sont données en millimètres (pouces). Précision d’ 1 / 16 pour les valeurs en pouces. Alle Maße in mm (Zoll). Zoll-Angaben mit einer Genauig...